#include <malloc.h>
#include <dm/root.h>
#include <linux/compiler.h>
+#include <fdt_support.h>
DECLARE_GLOBAL_DATA_PTR;
return 1;
}
+/* weak default platform specific function to initialize
+ * dram banks
+ */
+__weak int dram_init_banksize(void)
+{
+ return 0;
+}
+
/*
* Weak default function for arch specific zImage check. Return zero
* and fill start and end address if image is recognized.
}
#endif
+void spl_fixup_fdt(void)
+{
+#if defined(CONFIG_SPL_OF_LIBFDT) && defined(CONFIG_SYS_SPL_ARGS_ADDR)
+ void *fdt_blob = (void *)CONFIG_SYS_SPL_ARGS_ADDR;
+ int err;
+
+ err = fdt_check_header(fdt_blob);
+ if (err < 0) {
+ printf("fdt_root: %s\n", fdt_strerror(err));
+ return;
+ }
+
+ /* fixup the memory dt node */
+ err = fdt_shrink_to_minimum(fdt_blob, 0);
+ if (err == 0) {
+ printf("spl: fdt_shrink_to_minimum err - %d\n", err);
+ return;
+ }
+
+ err = arch_fixup_fdt(fdt_blob);
+ if (err) {
+ printf("spl: arch_fixup_fdt err - %d\n", err);
+ return;
+ }
+#endif
+}
+
/*
* Weak default function for board specific cleanup/preparation before
* Linux boot. Some boards/platforms might not need it, so just provide
{
spl_image->size = CONFIG_SYS_MONITOR_LEN;
spl_image->entry_point = CONFIG_SYS_UBOOT_START;
+#ifdef CONFIG_CPU_V7M
+ spl_image->entry_point |= 0x1;
+#endif
spl_image->load_addr = CONFIG_SYS_TEXT_BASE;
spl_image->os = IH_OS_U_BOOT;
spl_image->name = "U-Boot";
int spl_parse_image_header(struct spl_image_info *spl_image,
const struct image_header *header)
{
- u32 header_size = sizeof(struct image_header);
-
if (image_get_magic(header) == IH_MAGIC) {
+#ifdef CONFIG_SPL_LEGACY_IMAGE_SUPPORT
+ u32 header_size = sizeof(struct image_header);
+
if (spl_image->flags & SPL_COPY_PAYLOAD_ONLY) {
/*
* On some system (e.g. powerpc), the load-address and
debug("spl: payload image: %.*s load addr: 0x%lx size: %d\n",
(int)sizeof(spl_image->name), spl_image->name,
spl_image->load_addr, spl_image->size);
+#else
+ /* LEGACY image not supported */
+ debug("Legacy boot image support not enabled, proceeding to other boot methods");
+ return -EINVAL;
+#endif
} else {
#ifdef CONFIG_SPL_PANIC_ON_RAW_IMAGE
/*
}
#endif
-#ifdef CONFIG_SPL_ABORT_ON_RAW_IMAGE
- /* Signature not found, proceed to other boot methods. */
- return -EINVAL;
-#else
+#ifdef CONFIG_SPL_RAW_IMAGE_SUPPORT
/* Signature not found - assume u-boot.bin */
debug("mkimage signature not found - ih_magic = %x\n",
header->ih_magic);
spl_set_header_raw_uboot(spl_image);
+#else
+ /* RAW image not supported, proceed to other boot methods. */
+ debug("Raw boot image support not enabled, proceeding to other boot methods");
+ return -EINVAL;
#endif
}
+
return 0;
}
image_entry();
}
-int spl_init(void)
+static int spl_common_init(bool setup_malloc)
{
int ret;
- debug("spl_init()\n");
-/*
- * with CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN we set malloc_base and
- * malloc_limit in spl_relocate_stack_gd
- */
-#if defined(CONFIG_SYS_MALLOC_F_LEN) && \
- !defined(CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN)
+ debug("spl_early_init()\n");
+
+#if defined(CONFIG_SYS_MALLOC_F_LEN)
+ if (setup_malloc) {
#ifdef CONFIG_MALLOC_F_ADDR
- gd->malloc_base = CONFIG_MALLOC_F_ADDR;
+ gd->malloc_base = CONFIG_MALLOC_F_ADDR;
#endif
- gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN;
- gd->malloc_ptr = 0;
+ gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN;
+ gd->malloc_ptr = 0;
+ }
#endif
if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) {
ret = fdtdec_setup();
return ret;
}
}
+
+ return 0;
+}
+
+int spl_early_init(void)
+{
+ int ret;
+
+ ret = spl_common_init(true);
+ if (ret)
+ return ret;
+ gd->flags |= GD_FLG_SPL_EARLY_INIT;
+
+ return 0;
+}
+
+int spl_init(void)
+{
+ int ret;
+ bool setup_malloc = !(IS_ENABLED(CONFIG_SPL_STACK_R) &&
+ IS_ENABLED(CONFIG_SPL_SYS_MALLOC_SIMPLE));
+
+ if (!(gd->flags & GD_FLG_SPL_EARLY_INIT)) {
+ ret = spl_common_init(setup_malloc);
+ if (ret)
+ return ret;
+ }
gd->flags |= GD_FLG_SPL_INIT;
return 0;
struct spl_image_info spl_image;
debug(">>spl:board_init_r()\n");
+ gd->bd = &bdata;
+#ifdef CONFIG_SPL_OS_BOOT
+ dram_init_banksize();
+#endif
#if defined(CONFIG_SYS_SPL_MALLOC_START)
mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
#endif
memset(&spl_image, '\0', sizeof(spl_image));
+#ifdef CONFIG_SYS_SPL_ARGS_ADDR
+ spl_image.arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR;
+#endif
board_boot_order(spl_boot_list);
if (boot_from_devices(&spl_image, spl_boot_list,
#ifdef CONFIG_SPL_OS_BOOT
case IH_OS_LINUX:
debug("Jumping to Linux\n");
+ spl_fixup_fdt();
spl_board_prepare_for_linux();
- jump_to_image_linux(&spl_image,
- (void *)CONFIG_SYS_SPL_ARGS_ADDR);
+ jump_to_image_linux(&spl_image);
#endif
default:
debug("Unsupported OS image.. Jumping nevertheless..\n");
gd->malloc_ptr / 1024);
#endif
+ if (IS_ENABLED(CONFIG_SPL_ATF_SUPPORT)) {
+ debug("loaded - jumping to U-Boot via ATF BL31.\n");
+ bl31_entry();
+ }
+
debug("loaded - jumping to U-Boot...\n");
spl_board_prepare_for_boot();
jump_to_image_no_args(&spl_image);
*/
void preloader_console_init(void)
{
- gd->bd = &bdata;
gd->baudrate = CONFIG_BAUDRATE;
serial_init(); /* serial communications setup */