return 1;
}
off &= ~(nand->writesize - 1);
- size_t dummy;
loff_t addr = (loff_t) off;
struct mtd_oob_ops ops;
memset(&ops, 0, sizeof(ops));
return 1;
s = strchr(cmd, '.');
- if (s != NULL &&
- (!strcmp(s, ".jffs2") || !strcmp(s, ".e") || !strcmp(s, ".i"))) {
+ if (!s || !strcmp(s, ".jffs2") ||
+ !strcmp(s, ".e") || !strcmp(s, ".i")) {
if (read) {
/* read */
nand_read_options_t opts;
else
ret = nand->write_oob(nand, off, &ops);
} else {
- if (read)
- ret = nand_read(nand, off, &size, (u_char *)addr);
- else
- ret = nand_write(nand, off, &size, (u_char *)addr);
+ printf("Unknown nand command suffix '%s'.\n", s);
+ return 1;
}
printf(" %d bytes %s: %s\n", size,
}
/*
* ! BROKEN !
- *
+ *
* TODO: must be implemented and tested by someone with HW
*/
#if 0
/*
* ! BROKEN !
- *
+ *
* TODO: must be implemented and tested by someone with HW
*/
#if 0
"nand - NAND sub-system\n",
"info - show available NAND devices\n"
"nand device [dev] - show or set current device\n"
- "nand read[.jffs2] - addr off|partition size\n"
- "nand write[.jffs2] - addr off|partition size\n"
+ "nand read - addr off|partition size\n"
+ "nand write - addr off|partition size\n"
" read/write 'size' bytes starting at offset 'off'\n"
- " to/from memory address 'addr'\n"
+ " to/from memory address 'addr', skipping bad blocks.\n"
"nand erase [clean] [off size] - erase 'size' bytes from\n"
" offset 'off' (entire device if not specified)\n"
"nand bad - show bad blocks\n"
char *ep, *s;
size_t cnt;
image_header_t *hdr;
- int jffs2 = 0;
#if defined(CONFIG_FIT)
const void *fit_hdr = NULL;
#endif
s = strchr(cmd, '.');
if (s != NULL &&
- (!strcmp(s, ".jffs2") || !strcmp(s, ".e") || !strcmp(s, ".i")))
- jffs2 = 1;
+ (strcmp(s, ".jffs2") && !strcmp(s, ".e") && !strcmp(s, ".i"))) {
+ printf("Unknown nand load suffix '%s'\n", s);
+ show_boot_progress(-53);
+ return 1;
+ }
printf("\nLoading from %s, offset 0x%lx\n", nand->name, offset);
}
show_boot_progress (57);
+ /* FIXME: skip bad blocks */
r = nand_read(nand, offset, &cnt, (u_char *) addr);
if (r) {
puts("** Read error\n");
U_BOOT_CMD(nboot, 4, 1, do_nandboot,
"nboot - boot from NAND device\n",
- "[.jffs2] [partition] | [[[loadAddr] dev] offset]\n");
+ "[partition] | [[[loadAddr] dev] offset]\n");
#endif