return gd->ram_top;
}
-__weak phys_size_t board_reserve_ram_top(phys_size_t ram_size)
-{
-#ifdef CONFIG_SYS_MEM_TOP_HIDE
- return ram_size - CONFIG_SYS_MEM_TOP_HIDE;
-#else
- return ram_size;
-#endif
-}
-
static int setup_dest_addr(void)
{
debug("Monitor len: %08lX\n", gd->mon_len);
* Ram is setup, size stored in gd !!
*/
debug("Ram size: %08lX\n", (ulong)gd->ram_size);
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- /* Reserve memory for secure MMU tables, and/or security monitor */
- gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
- /*
- * Record secure memory location. Need recalcuate if memory splits
- * into banks, or the ram base is not zero.
- */
- gd->arch.secure_ram = gd->ram_size;
-#endif
+#if defined(CONFIG_SYS_MEM_TOP_HIDE)
/*
* Subtract specified amount of memory to hide so that it won't
* get "touched" at all by U-Boot. By fixing up gd->ram_size
* the Linux kernel should now get passed the now "corrected"
- * memory size and won't touch it either. This has been used
- * by arch/powerpc exclusively. Now ARMv8 takes advantage of
- * thie mechanism. If memory is split into banks, addresses
- * need to be calculated.
+ * memory size and won't touch it either. This should work
+ * for arch/ppc and arch/powerpc. Only Linux board ports in
+ * arch/powerpc with bootwrapper support, that recalculate the
+ * memory size from the SDRAM controller setup will have to
+ * get fixed.
*/
- gd->ram_size = board_reserve_ram_top(gd->ram_size);
-
+ gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
+#endif
#ifdef CONFIG_SYS_SDRAM_BASE
gd->ram_top = CONFIG_SYS_SDRAM_BASE;
#endif
}
/* ARM calls relocate_code from its crt0.S */
-#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)
+#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \
+ !CONFIG_IS_ENABLED(X86_64)
static int jump_to_copy(void)
{
return 0;
}
-static init_fnc_t init_sequence_f[] = {
+static const init_fnc_t init_sequence_f[] = {
#ifdef CONFIG_SANDBOX
setup_ram_buf,
#endif
#endif
initf_malloc,
initf_console_record,
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
- /* TODO: can this go into arch_cpu_init()? */
- probecpu,
-#endif
#if defined(CONFIG_X86) && defined(CONFIG_HAVE_FSP)
x86_fsp_init,
#endif
defined(CONFIG_SH) || defined(CONFIG_SPARC)
timer_init, /* initialize timer */
#endif
-#ifdef CONFIG_SYS_ALLOC_DPRAM
-#if !defined(CONFIG_CPM2)
- dpram_init,
-#endif
-#endif
#if defined(CONFIG_BOARD_POSTCLK_INIT)
board_postclk_init,
#endif
#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SH)
checkcpu,
#endif
+#if defined(CONFIG_DISPLAY_CPUINFO)
print_cpuinfo, /* display cpu info (and speed) */
-#if defined(CONFIG_MPC5xxx)
- prt_mpc5xxx_clks,
-#endif /* CONFIG_MPC5xxx */
+#endif
#if defined(CONFIG_DISPLAY_BOARDINFO)
show_board_info,
#endif
setup_reloc,
#if defined(CONFIG_X86) || defined(CONFIG_ARC)
copy_uboot_to_ram,
- clear_bss,
do_elf_reloc_fixups,
+ clear_bss,
#endif
#if defined(CONFIG_XTENSA)
clear_bss,
#endif
-#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)
+#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \
+ !CONFIG_IS_ENABLED(X86_64)
jump_to_copy,
#endif
NULL,
hang();
#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \
- !defined(CONFIG_EFI_APP)
+ !defined(CONFIG_EFI_APP) && !CONFIG_IS_ENABLED(X86_64)
/* NOTREACHED - jump_to_copy() does not return */
hang();
#endif
* NOTE: At present only x86 uses this route, but it is intended that
* all archs will move to this when generic relocation is implemented.
*/
-static init_fnc_t init_sequence_f_r[] = {
+static const init_fnc_t init_sequence_f_r[] = {
+#if !CONFIG_IS_ENABLED(X86_64)
init_cache_f_r,
+#endif
NULL,
};