fdt: add call to ft_board_setup_ex() for ks2 boards

[platform/kernel/u-boot.git] / common / Kconfig

diff --git a/common/Kconfig b/common/Kconfig
index d5bc37e..d7300c2 100644 (file)
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -125,6 +125,7 @@ config NOR_BOOT
 config NAND_BOOT
        bool "Support for booting from NAND flash"
        default n
+       imply NAND
        help
          Enabling this will make a U-Boot binary that is capable of being
          booted via NAND flash. This is not a must, some SoCs need this,
@@ -133,6 +134,7 @@ config NAND_BOOT
 config ONENAND_BOOT
        bool "Support for booting from ONENAND"
        default n
+       imply NAND
        help
          Enabling this will make a U-Boot binary that is capable of being
          booted via ONENAND. This is not a must, some SoCs need this,
@@ -182,6 +184,10 @@ config BOOTDELAY
          set to -1 to disable autoboot.
          set to -2 to autoboot with no delay and not check for abort
 
+         If this value is >= 0 then it is also used for the default delay
+         before starting the default entry in bootmenu. If it is < 0 then
+         a default value of 10s is used.
+
          See doc/README.autoboot for details.
 
 config USE_BOOTARGS
@@ -253,6 +259,11 @@ config CONSOLE_RECORD_IN_SIZE
          The buffer is allocated immediately after the malloc() region is
          ready.
 
+config DISABLE_CONSOLE
+       bool "Add functionality to disable console completely"
+       help
+               Disable console (in & out).
+
 config IDENT_STRING
        string "Board specific string to be added to uboot version string"
        help
@@ -424,6 +435,7 @@ menu "Logging"
 
 config LOG
        bool "Enable logging support"
+       depends on DM
        help
          This enables support for logging of status and debug messages. These
          can be displayed on the console, recorded in a memory buffer, or
@@ -519,11 +531,26 @@ config LOG_ERROR_RETURN
 
 endmenu
 
+config SUPPORT_RAW_INITRD
+       bool "Enable raw initrd images"
+       help
+         Note, defining the SUPPORT_RAW_INITRD allows user to supply
+         kernel with raw initrd images. The syntax is slightly different, the
+         address of the initrd must be augmented by it's size, in the following
+         format: "<initrd address>:<initrd size>".
+
 config DEFAULT_FDT_FILE
        string "Default fdt file"
        help
          This option is used to set the default fdt file to boot OS.
 
+config MISC_INIT_R
+       bool "Execute Misc Init"
+       default y if ARCH_KEYSTONE || ARCH_SUNXI || MPC85xx
+       default y if ARCH_OMAP2PLUS && !AM33XX
+       help
+         Enabling this option calls 'misc_init_r' function
+
 config VERSION_VARIABLE
        bool "add U-Boot environment variable vers"
        default n
@@ -535,7 +562,7 @@ config VERSION_VARIABLE
          next reset.
 
 config BOARD_LATE_INIT
-       bool
+       bool "Execute Board late init"
        help
          Sometimes board require some initialization code that might
          require once the actual init done, example saving board specific env,
@@ -546,20 +573,27 @@ config BOARD_LATE_INIT
 
 config DISPLAY_CPUINFO
        bool "Display information about the CPU during start up"
-       default y if ARM || NIOS2 || X86 || XTENSA || M68K
+       default y if ARC|| ARM || NIOS2 || X86 || XTENSA || M68K
        help
          Display information about the CPU that U-Boot is running on
          when U-Boot starts up. The function print_cpuinfo() is called
          to do this.
 
 config DISPLAY_BOARDINFO
-       bool "Display information about the board during start up"
-       default y if ARM || M68K || MIPS || PPC || SANDBOX || XTENSA
+       bool "Display information about the board during early start up"
+       default y if ARC || ARM || M68K || MIPS || PPC || SANDBOX || XTENSA
        help
          Display information about the board that U-Boot is running on
          when U-Boot starts up. The board function checkboard() is called
          to do this.
 
+config DISPLAY_BOARDINFO_LATE
+       bool "Display information about the board during late start up"
+       help
+         Display information about the board that U-Boot is running on after
+         the relocation phase. The board function checkboard() is called to do
+         this.
+
 menu "Start-up hooks"
 
 config ARCH_EARLY_INIT_R
@@ -587,6 +621,22 @@ config BOARD_EARLY_INIT_F
          Note that the normal serial console is not yet set up, but the
          debug UART will be available if enabled.
 
+config BOARD_EARLY_INIT_R
+       bool "Call board-specific init after relocation"
+       help
+         Some boards need to perform initialisation as directly after
+         relocation. With this option, U-Boot calls board_early_init_r()
+         in the post-relocation init sequence.
+
+config LAST_STAGE_INIT
+       bool "Call board-specific as last setup step"
+       help
+         Some boards need to perform initialisation immediately before control
+         is passed to the command-line interpreter (e.g. for initializations
+         that depend on later phases in the init sequence). With this option,
+         U-Boot calls last_stage_init() before the command-line interpreter is
+         started.
+
 endmenu
 
 menu "Security support"
@@ -599,6 +649,17 @@ config HASH
          and the algorithms it supports are defined in common/hash.c. See
          also CMD_HASH for command-line access.
 
+config AVB_VERIFY
+       bool "Build Android Verified Boot operations"
+       depends on LIBAVB && FASTBOOT
+       depends on PARTITION_UUIDS
+       help
+         This option enables compilation of bootloader-dependent operations,
+         used by Android Verified Boot 2.0 library (libavb). Includes:
+           * Helpers to process strings in order to build OS bootargs.
+           * Helpers to access MMC, similar to drivers/fastboot/fb_mmc.c.
+           * Helpers to alloc/init/free avb ops.
+
 endmenu
 
 menu "Update support"