Calls to show_boot_progress() will also result in log entries but
these will not have names.
+config SPL_BOOTSTAGE
+ bool "Boot timing and reported in SPL"
+ depends on BOOTSTAGE
+ help
+ Enable recording of boot time in SPL. To make this visible to U-Boot
+ proper, enable BOOTSTAGE_STASH as well. This will stash the timing
+ information when SPL finishes and load it when U-Boot proper starts
+ up.
+
config BOOTSTAGE_REPORT
bool "Display a detailed boot timing report before booting the OS"
depends on BOOTSTAGE
endmenu
-menu "Environment"
-
-if ARCH_SUNXI
-
-choice
- prompt "Environment Device"
- default ENV_IS_IN_MMC if ARCH_SUNXI
-
-config ENV_IS_IN_MMC
- bool "Environment in an MMC device"
- depends on CMD_MMC
- help
- Define this if you have an MMC device which you want to use for the
- environment.
-
-config ENV_IS_IN_NAND
- bool "Environment in a NAND device"
- depends on CMD_NAND
- help
- Define this if you have a NAND device which you want to use for the
- environment.
-
-config ENV_IS_IN_UBI
- bool "Environment in a UBI volume"
- depends on CMD_UBI
- depends on CMD_MTDPARTS
- help
- Define this if you have a UBI volume which you want to use for the
- environment.
-
-config ENV_IS_NOWHERE
- bool "Environment is not stored"
- help
- Define this if you don't want to or can't have an environment stored
- on a storage medium
-
-endchoice
-
-config ENV_OFFSET
- hex "Environment Offset"
- depends on !ENV_IS_IN_UBI
- depends on !ENV_IS_NOWHERE
- default 0x88000 if ARCH_SUNXI
- help
- Offset from the start of the device (or partition)
-
-config ENV_SIZE
- hex "Environment Size"
- depends on !ENV_IS_NOWHERE
- default 0x20000 if ARCH_SUNXI
- help
- Size of the environment storage area
-
-config ENV_UBI_PART
- string "UBI partition name"
- depends on ENV_IS_IN_UBI
- help
- MTD partition containing the UBI device
-
-config ENV_UBI_VOLUME
- string "UBI volume name"
- depends on ENV_IS_IN_UBI
- help
- Name of the volume that you want to store the environment in.
-
-endif
-
-endmenu
-
config BOOTDELAY
int "delay in seconds before automatically booting"
default 2
See doc/README.autoboot for details.
+config USE_BOOTARGS
+ bool "Enable boot arguments"
+ help
+ Provide boot arguments to bootm command. Boot arguments are specified
+ in CONFIG_BOOTARGS option. Enable this option to be able to specify
+ CONFIG_BOOTARGS string. If this option is disabled, CONFIG_BOOTARGS
+ will be undefined and won't take any space in U-Boot image.
+
+config BOOTARGS
+ string "Boot arguments"
+ depends on USE_BOOTARGS
+ help
+ This can be used to pass arguments to the bootm command. The value of
+ CONFIG_BOOTARGS goes into the environment value "bootargs". Note that
+ this value will also override the "chosen" node in FDT blob.
+
menu "Console"
config MENU
endmenu
+config DTB_RESELECT
+ bool "Support swapping dtbs at a later point in boot"
+ depends on FIT_EMBED
+ help
+ It is possible during initial boot you may need to use a generic
+ dtb until you can fully determine the board your running on. This
+ config allows boards to implement a function at a later point
+ during boot to switch to the "correct" dtb.
+
+config FIT_EMBED
+ bool "Support a FIT image embedded in the U-boot image"
+ help
+ This option provides hooks to allow U-boot to parse an
+ appended FIT image and enable board specific code to then select
+ the correct DTB to be used.
+
config DEFAULT_FDT_FILE
string "Default fdt file"
help
config DISPLAY_CPUINFO
bool "Display information about the CPU during start up"
- default y if ARM || NIOS2 || X86 || XTENSA || MPC5xxx
+ default y if ARM || NIOS2 || X86 || XTENSA
help
Display information about the CPU that U-Boot is running on
when U-Boot starts up. The function print_cpuinfo() is called
config DISPLAY_BOARDINFO
bool "Display information about the board during start up"
- default y if ARM || M68K || MIPS || PPC || XTENSA
+ default y if ARM || M68K || MIPS || PPC || SANDBOX || XTENSA
help
Display information about the board that U-Boot is running on
when U-Boot starts up. The board function checkboard() is called
config ARCH_EARLY_INIT_R
bool "Call arch-specific init soon after relocation"
- default y if X86
help
With this option U-Boot will call arch_early_init_r() soon after
relocation. Driver model is running by this point, and the cache
config BOARD_EARLY_INIT_F
bool "Call board-specific init before relocation"
- default y if X86
help
Some boards need to perform initialisation as soon as possible
after boot. With this option, U-Boot calls board_early_init_f()