int
default LOGLEVEL
+config TPL_LOGLEVEL
+ int
+ default LOGLEVEL
+
config SILENT_CONSOLE
bool "Support a silent console"
help
This option allows the console to be silenced, meaning that no
output will appear on the console devices. This is controlled by
- setting the environment vaariable 'silent' to a non-empty value.
+ setting the environment variable 'silent' to a non-empty value.
Note this also silences the console when booting Linux.
When the console is set up, the variable is checked, and the
help
Normally U-Boot displays the current settings for stdout, stdin
and stderr on boot when the post-relocation console is set up.
- Enable this option to supress this output. It can be obtained by
+ Enable this option to suppress this output. It can be obtained by
calling stdio_print_current_devices() from board code.
config SYS_STDIO_DEREGISTER
6 - detail
7 - debug
+config TPL_LOG_MAX_LEVEL
+ int "Maximum log level to record in TPL"
+ depends on TPL_LOG
+ default 3
+ help
+ This selects the maximum log level that will be recorded. Any value
+ higher than this will be ignored. If possible log statements below
+ this level will be discarded at build time. Levels:
+
+ 0 - panic
+ 1 - critical
+ 2 - error
+ 3 - warning
+ 4 - note
+ 5 - info
+ 6 - detail
+ 7 - debug
+
config LOG_CONSOLE
bool "Allow log output to the console"
depends on LOG
log message is shown - other details like level, category, file and
line number are omitted.
-config LOG_SPL_CONSOLE
+config SPL_LOG_CONSOLE
+ bool "Allow log output to the console in SPL"
+ depends on SPL_LOG
+ default y
+ help
+ Enables a log driver which writes log records to the console.
+ Generally the console is the serial port or LCD display. Only the
+ log message is shown - other details like level, category, file and
+ line number are omitted.
+
+config TPL_LOG_CONSOLE
bool "Allow log output to the console in SPL"
- depends on LOG_SPL
+ depends on TPL_LOG
default y
help
Enables a log driver which writes log records to the console.
This enables a 'log test' command to test logging. It is normally
executed from a pytest and simply outputs logging information
in various different ways to test that the logging system works
- correctly with varoius settings.
+ correctly with various settings.
config LOG_ERROR_RETURN
bool "Log all functions which return an error"
depends on LOG
help
When an error is returned in U-Boot it is sometimes difficult to
- figure out the root cause. For eaxmple, reading from SPI flash may
+ figure out the root cause. For example, reading from SPI flash may
fail due to a problem in the SPI controller or due to the flash part
not returning the expected information. This option changes
log_ret() to log any errors it sees. With this option disabled,
With this option U-Boot will call arch_misc_init() after
relocation to allow miscellaneous arch-dependent initialisation
to be performed. This function should be defined by the board
- and will be called after the console is set up, after relocaiton.
+ and will be called after the console is set up, after relocation.
config BOARD_EARLY_INIT_F
bool "Call board-specific init before relocation"
endmenu
+menu "Blob list"
+
+config BLOBLIST
+ bool "Support for a bloblist"
+ help
+ This enables support for a bloblist in U-Boot, which can be passed
+ from TPL to SPL to U-Boot proper (and potentially to Linux). The
+ blob list supports multiple binary blobs of data, each with a tag,
+ so that different U-Boot components can store data which can survive
+ through to the next stage of the boot.
+
+config SPL_BLOBLIST
+ bool "Support for a bloblist in SPL"
+ depends on BLOBLIST
+ default y if SPL
+ help
+ This enables a bloblist in SPL. If this is the first part of U-Boot
+ to run, then the bloblist is set up in SPL and passed to U-Boot
+ proper. If TPL also has a bloblist, then SPL uses the one from there.
+
+config TPL_BLOBLIST
+ bool "Support for a bloblist in TPL"
+ depends on BLOBLIST
+ default y if TPL
+ help
+ This enables a bloblist in TPL. The bloblist is set up in TPL and
+ passed to SPL and U-Boot proper.
+
+config BLOBLIST_SIZE
+ hex "Size of bloblist"
+ depends on BLOBLIST
+ default 0x400
+ help
+ Sets the size of the bloblist in bytes. This must include all
+ overhead (alignment, bloblist header, record header). The bloblist
+ is set up in the first part of U-Boot to run (TPL, SPL or U-Boot
+ proper), and this sane bloblist is used for subsequent stages.
+
+config BLOBLIST_ADDR
+ hex "Address of bloblist"
+ depends on BLOBLIST
+ default 0xe000 if SANDBOX
+ help
+ Sets the address of the bloblist, set up by the first part of U-Boot
+ which runs. Subsequent U-Boot stages typically use the same address.
+
+endmenu
+
source "common/spl/Kconfig"
projects / platform / kernel / u-boot.git / blobdiff