menu "Info commands"
+config CMD_ACPI
+ bool "acpi"
+ default y if ACPIGEN
+ help
+ List and dump ACPI tables. ACPI (Advanced Configuration and Power
+ Interface) is used mostly on x86 for providing information to the
+ Operating System about devices in the system. The tables are set up
+ by the firmware, typically U-Boot but possibly an earlier firmware
+ module, if U-Boot is chain-loaded from something else. ACPI tables
+ can also include code, to perform hardware-specific tasks required
+ by the Operating Systems. This allows some amount of separation
+ between the firmware and OS, and is particularly useful when you
+ want to make hardware changes without the OS needing to be adjusted.
+
config CMD_BDI
bool "bdinfo"
default y
config CMD_BOOTEFI_HELLO
bool "Allow booting a standard EFI hello world for testing"
depends on CMD_BOOTEFI_HELLO_COMPILE
+ default y if CMD_BOOTEFI_SELFTEST
help
This adds a standard EFI hello world application to U-Boot so that
it can be used with the 'bootefi hello' command. This is useful
config CMD_ELF
bool "bootelf, bootvx"
default y
+ select LIB_ELF
help
Boot an ELF/vxWorks image from the memory.
flash used by Falcon-mode boot. See the documentation until CMD_SPL
for detail.
-config CMD_FITUPD
- bool "fitImage update command"
- help
- Implements the 'fitupd' command, which allows to automatically
- store software updates present on a TFTP server in NOR Flash
-
config CMD_THOR_DOWNLOAD
bool "thor - TIZEN 'thor' download"
select DFU
This command can be optionally used for evaluation in scripts:
[-d] : evaluate whether default environment is used
[-p] : evaluate whether environment can be persisted
+ [-q] : quiet output
The result of multiple evaluations will be combined with AND.
endmenu
base - print or set address offset
loop - initialize loop on address range
+config MEM_SEARCH
+ bool "ms - Memory search"
+ help
+ Memory-search command
+
+ This allows searching through a region of memory looking for hex
+ data (byte, 16-bit word, 32-bit long, also 64-bit on machines that
+ support it). It is also possible to search for a string. The
+ command accepts a memory range and a list of values to search for.
+ The values need to appear in memory in the same order they are given
+ in the command. At most 10 matches can be returned at a time, but
+ pressing return will show the next 10 matches. Environment variables
+ are set for use with scripting (memmatches, memaddr, mempos).
+
config CMD_MX_CYCLIC
bool "Enable cyclic md/mw commands"
depends on CMD_MEMORY
help
Use a more complete alternative memory test.
+config SYS_MEMTEST_START
+ hex "default start address for mtest"
+ default 0
+ help
+ This is the default start address for mtest for simple read/write
+ test. If no arguments are given to mtest, default address is used
+ as start address.
+
+config SYS_MEMTEST_END
+ hex "default end address for mtest"
+ default 0x1000
+ help
+ This is the default end address for mtest for simple read/write
+ test. If no arguments are given to mtest, default address is used
+ as end address.
+
endif
config CMD_SHA1SUM
Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm)
image from memory.
+config CMD_UNLZ4
+ bool "unlz4"
+ default y if CMD_BOOTI
+ select LZ4
+ help
+ Support decompressing an LZ4 image from memory region.
+
config CMD_UNZIP
bool "unzip"
default y if CMD_BOOTI
+ select GZIP
help
Uncompress a zip-compressed memory region.
config CMD_ZIP
bool "zip"
+ select GZIP_COMPRESSED
help
Compress a memory region with zlib deflate method.
help
Load an S-Record file over serial line
+config CMD_LSBLK
+ depends on BLK
+ bool "lsblk - list block drivers and devices"
+ help
+ Print list of available block device drivers, and for each, the list
+ of known block devices.
+
config CMD_MMC
bool "mmc"
help
MMC memory mapped support.
+if CMD_MMC
+
+config CMD_BKOPS_ENABLE
+ bool "mmc bkops enable"
+ depends on CMD_MMC
+ default n
+ help
+ Enable command for setting manual background operations handshake
+ on a eMMC device. The feature is optionally available on eMMC devices
+ conforming to standard >= 4.41.
+
config CMD_MMC_RPMB
bool "Enable support for RPMB in the mmc command"
- depends on CMD_MMC
+ depends on SUPPORT_EMMC_RPMB
help
Enable the commands for reading, writing and programming the
key for the Replay Protection Memory Block partition in eMMC.
config CMD_MMC_SWRITE
bool "mmc swrite"
- depends on CMD_MMC && MMC_WRITE
+ depends on MMC_WRITE
select IMAGE_SPARSE
help
Enable support for the "mmc swrite" command to write Android sparse
images to eMMC.
+endif
+
config CMD_MTD
bool "mtd"
depends on MTD
option provides a way to control this. The commands that are enabled
vary depending on the board.
-config CMD_BKOPS_ENABLE
- bool "mmc bkops enable"
- depends on CMD_MMC
- default n
- help
- Enable command for setting manual background operations handshake
- on a eMMC device. The feature is optionally available on eMMC devices
- conforming to standard >= 4.41.
-
config CMD_BLOCK_CACHE
bool "blkcache - control and stats for block cache"
depends on BLOCK_CACHE
Enable the 'date' command for getting/setting the time/date in RTC
devices.
+config CMD_RTC
+ bool "rtc"
+ depends on DM_RTC
+ help
+ Enable the 'rtc' command for low-level access to RTC devices.
+
config CMD_TIME
bool "time"
help
help
The bedbug (emBEDded deBUGger) command provides debugging features
for some PowerPC processors. For details please see the
- docuemntation in doc/README.beddbug
+ documentation in doc/README.bedbug.
config CMD_DIAG
bool "diag - Board diagnostics"
It is also strongly encouraged to also enable CONFIG_MTD to get full
partition support.
+config CMD_UBI_RENAME
+ bool "Enable rename"
+ depends on CMD_UBI
+ default n
+ help
+ Enable a "ubi" command to rename ubi volume:
+ ubi rename <oldname> <newname>
+
config CMD_UBIFS
tristate "Enable UBIFS - Unsorted block images filesystem commands"
depends on CMD_UBI
projects / platform / kernel / u-boot.git / blobdiff