config SYS_PROMPT
string "Shell prompt"
+ default "Zynq> " if ARCH_ZYNQ
+ default "ZynqMP> " if ARCH_ZYNQMP
default "=> "
help
This string is displayed in the command line to the left of the
config AUTOBOOT_MENU_SHOW
bool "Show a menu on boot"
+ depends on CMD_BOOTMENU
help
This enables the boot menu, controlled by environment variables
defined by the board. The menu starts after running the 'preboot'
help
Boot an AArch64 Linux Kernel image from memory.
+config BOOTM_LINUX
+ bool "Support booting Linux OS images"
+ depends on CMD_BOOTM || CMD_BOOTZ || CMD_BOOTI
+ default y
+ help
+ Support booting the Linux kernel directly via a command such as bootm
+ or booti or bootz.
+
+config BOOTM_NETBSD
+ bool "Support booting NetBSD (non-EFI) loader images"
+ depends on CMD_BOOTM
+ default y
+ help
+ Support booting NetBSD via the bootm command.
+
+config BOOTM_OPENRTOS
+ bool "Support booting OPENRTOS / FreeRTOS images"
+ depends on CMD_BOOTM
+ help
+ Support booting OPENRTOS / FreeRTOS via the bootm command.
+
+config BOOTM_OSE
+ bool "Support booting Enea OSE images"
+ depends on CMD_BOOTM
+ help
+ Support booting Enea OSE images via the bootm command.
+
+config BOOTM_PLAN9
+ bool "Support booting Plan9 OS images"
+ depends on CMD_BOOTM
+ default y
+ help
+ Support booting Plan9 images via the bootm command.
+
+config BOOTM_RTEMS
+ bool "Support booting RTEMS OS images"
+ depends on CMD_BOOTM
+ default y
+ help
+ Support booting RTEMS images via the bootm command.
+
+config BOOTM_VXWORKS
+ bool "Support booting VxWorks OS images"
+ depends on CMD_BOOTM
+ default y
+ help
+ Support booting VxWorks images via the bootm command.
+
config CMD_BOOTEFI
bool "bootefi"
depends on EFI_LOADER
config CMD_BOOTEFI_HELLO_COMPILE
bool "Compile a standard EFI hello world binary for testing"
- depends on CMD_BOOTEFI && !CPU_V7M && !SANDBOX
+ depends on CMD_BOOTEFI && !CPU_V7M
default y
help
This compiles a standard EFI hello world application with U-Boot so
config CMD_THOR_DOWNLOAD
bool "thor - TIZEN 'thor' download"
+ select DFU
help
Implements the 'thor' download protocol. This is a way of
downloading a software update over USB from an attached host.
config CMD_NVEDIT_EFI
bool "env [set|print] -e - set/print UEFI variables"
depends on EFI_LOADER
- default y
imply HEXDUMP
help
UEFI variables are encoded as some form of U-Boot variables.
base - print or set address offset
loop - initialize loop on address range
+config MX_CYCLIC
+ bool "Enable cyclic md/mw commands"
+ depends on CMD_MEMORY
+ help
+ Add the "mdc" and "mwc" memory commands. These are cyclic
+ "md/mw" commands.
+ Examples:
+
+ => mdc.b 10 4 500
+ This command will print 4 bytes (10,11,12,13) each 500 ms.
+
+ => mwc.l 100 12345678 10
+ This command will write 12345678 to address 100 all 10 ms.
+
config CMD_RANDOM
bool "random"
default y
peripherals. Sub-commands allow bus enumeration, displaying and
changing configuration space and a few other features.
-config CMD_PCMCIA
- bool "pinit - Set up PCMCIA device"
- help
- Provides a means to initialise a PCMCIA (Personal Computer Memory
- Card International Association) device. This is an old standard from
- about 1990. These devices are typically removable memory or network
- cards using a standard 68-pin connector.
-
config CMD_PINMUX
bool "pinmux - show pins muxing"
default y if PINCTRL
config CMD_SF
bool "sf"
depends on DM_SPI_FLASH || SPI_FLASH
+ default y if DM_SPI_FLASH
help
SPI Flash support
This provides various sub-commands to initialise and configure the
Turndra tsi148 device. See the command help for full details.
+config CMD_UFS
+ bool "Enable UFS - Universal Flash Subsystem commands"
+ depends on UFS
+ help
+ "This provides commands to initialise and configure universal flash
+ subsystem devices"
+
config CMD_UNIVERSE
bool "universe - Command to set up the Turndra Universe controller"
help
bool "Request & store 'ntpserverip' from BOOTP/DHCP server"
depends on CMD_BOOTP
+config CMD_PCAP
+ bool "pcap capture"
+ help
+ Selecting this will allow capturing all Ethernet packets and store
+ them in physical memory in a PCAP formated file,
+ later to be analyzed by PCAP reader application (IE. WireShark).
+
config BOOTP_PXE
bool "Send PXE client arch to BOOTP/DHCP server"
default y
bool "Enable 'bmp' command"
depends on LCD || DM_VIDEO || VIDEO
help
- This provides a way to obtain information about a BMP-format iamge
+ This provides a way to obtain information about a BMP-format image
and to display it. BMP (which presumably stands for BitMaP) is a
file format defined by Microsoft which supports images of various
depths, formats and compression methods. Headers on the file
config CMD_MTDPARTS
bool "MTD partition support"
- select MTD_DEVICE if (CMD_NAND || NAND)
+ select MTD_DEVICE if (CMD_NAND || MTD_RAW_NAND)
help
MTD partitioning tool support.
It is strongly encouraged to avoid using this command
at least as large as the size specified in the mtdparts variable and
2) each partition starts on a good block.
+config CMD_MTDPARTS_SHOW_NET_SIZES
+ bool "Show net size (w/o bad blocks) of partitions"
+ depends on CMD_MTDPARTS
+ help
+ Adds two columns to the printed partition table showing the
+ effective usable size of a partition, if bad blocks are taken
+ into account.
+
config CMD_REISER
bool "reiser - Access to reiserfs filesystems"
help
projects / platform / kernel / u-boot.git / blobdiff