help
Print board info
+config CMD_CONFIG
+ bool "config"
+ select BUILD_BIN2C
+ default SANDBOX
+ help
+ Print ".config" contents.
+
+ If this option is enabled, the ".config" file contents are embedded
+ in the U-Boot image and can be printed on the console by the "config"
+ command. This provides information of which options are enabled on
+ the running U-Boot.
+
config CMD_CONSOLE
bool "coninfo"
default y
config CMD_LICENSE
bool "license"
+ select BUILD_BIN2C
help
Print GPL license text
help
Boot an EFI image from memory.
+config CMD_BOOTEFI_HELLO_COMPILE
+ bool "Compile a standard EFI hello world binary for testing"
+ depends on CMD_BOOTEFI && (ARM || X86)
+ default y
+ help
+ This compiles a standard EFI hello world application with U-Boot so
+ that it can be used with the test/py testing framework. This is useful
+ for testing that EFI is working at a basic level, and for bringing
+ up EFI support on a new architecture.
+
+ No additional space will be required in the resulting U-Boot binary
+ when this option is enabled.
+
config CMD_BOOTEFI_HELLO
bool "Allow booting a standard EFI hello world for testing"
- depends on CMD_BOOTEFI && ARM && !ARM64
+ depends on CMD_BOOTEFI_HELLO_COMPILE
help
This adds a standard EFI hello world application to U-Boot so that
it can be used with the 'bootefi hello' command. This is useful
for testing that EFI is working at a basic level, and for bringing
up EFI support on a new architecture.
+config CMD_BOOTMENU
+ bool "bootmenu"
+ select MENU
+ help
+ Add an ANSI terminal boot menu command.
+
config CMD_ELF
bool "bootelf, bootvx"
default y
bool "md, mm, nm, mw, cp, cmp, base, loop"
default y
help
- Memeory commands.
+ Memory commands.
md - memory display
mm - memory modify (auto-incrementing address)
nm - memory modify (constant address)
cp - memory copy
cmp - memory compare
base - print or set address offset
- loop - initinite loop on address range
+ loop - initialize loop on address range
config CMD_CRC32
bool "crc32"
help
Compute CRC32.
+config CMD_MD5SUM
+ bool "md5sum"
+ default n
+ select MD5
+ help
+ Compute MD5 checksum.
+
+config MD5SUM_VERFIY
+ bool "md5sum -v"
+ default n
+ depends on CMD_MD5SUM
+ help
+ Add -v option to verify data against an MD5 checksum.
+
config LOOPW
bool "loopw"
help
help
Display memory information.
+config CMD_UNZIP
+ bool "unzip"
+ help
+ Uncompress a zip-compressed memory region.
+
+config CMD_ZIP
+ bool "zip"
+ help
+ Compress a memory region with zlib deflate method.
+
endmenu
menu "Device access commands"
erase - FLASH memory
protect - enable or disable FLASH write protection
+config CMD_GPT
+ bool "GPT (GUID Partition Table) command"
+ select PARTITION_UUIDS
+ select EFI_PARTITION
+ help
+ Enable the 'gpt' command to ready and write GPT style partition
+ tables.
+
config CMD_ARMFLASH
#depends on FLASH_CFI_DRIVER
bool "armflash"
config CMD_NAND
bool "nand"
+ default y if NAND_SUNXI
help
NAND support.
+if CMD_NAND
+config CMD_NAND_TRIMFFS
+ bool "nand write.trimffs"
+ default y if ARCH_SUNXI
+ help
+ Allows one to skip empty pages when flashing something on a NAND.
+
+config CMD_NAND_LOCK_UNLOCK
+ bool "nand lock/unlock"
+ help
+ NAND locking support.
+
+config CMD_NAND_TORTURE
+ bool "nand torture"
+ help
+ NAND torture support.
+
+endif # CMD_NAND
+
+config CMD_PART
+ bool "part"
+ select PARTITION_UUIDS
+ help
+ Read and display information about the partition table on
+ various media.
+
config CMD_SF
bool "sf"
help
help
Boot image via network using DHCP/TFTP protocol
+config CMD_PXE
+ bool "pxe"
+ select MENU
+ help
+ Boot image via network using PXE protocol
+
config CMD_NFS
bool "nfs"
default y
menu "Misc commands"
-config CMD_AMBAPP
- bool "ambapp"
- depends on LEON3
- default y
- help
- Lists AMBA Plug-n-Play information.
-
-config SYS_AMBAPP_PRINT_ON_STARTUP
- bool "Show AMBA PnP info on startup"
- depends on CMD_AMBAPP
+config CMD_BKOPS_ENABLE
+ bool "mmc bkops enable"
+ depends on CMD_MMC
default n
help
- Show AMBA Plug-n-Play information on startup.
+ Enable command for setting manual background operations handshake
+ on a eMMC device. The feature is optionally available on eMMC devices
+ conforming to standard >= 4.41.
config CMD_BLOCK_CACHE
bool "blkcache - control and stats for block cache"
This provides access to the QEMU firmware interface. The main
feature is to allow easy loading of files passed to qemu-system
via -kernel / -initrd
+
+source "cmd/mvebu/Kconfig"
+
endmenu
config CMD_BOOTSTAGE
help
Enables filesystem commands (e.g. load, ls) that work for multiple
fs types.
+
+config CMD_MTDPARTS
+ depends on ARCH_SUNXI
+ bool "MTD partition support"
+ help
+ MTD partition support
+
+config MTDIDS_DEFAULT
+ string "Default MTD IDs"
+ depends on CMD_MTDPARTS
+ help
+ Defines a default MTD ID
+
+config MTDPARTS_DEFAULT
+ string "Default MTD partition scheme"
+ depends on CMD_MTDPARTS
+ help
+ Defines a default MTD partitioning scheme in the Linux MTD command
+ line partitions format
+
endmenu
config CMD_UBI
tristate "Enable UBI - Unsorted block images commands"
select CRC32
select MTD_UBI
+ default y if NAND_SUNXI
help
UBI is a software layer above MTD layer which admits use of LVM-like
logical volumes on top of MTD devices, hides some complexities of
(www.linux-mtd.infradead.org). Activate this option if you want
to use U-Boot UBI commands.
+config CMD_UBIFS
+ tristate "Enable UBIFS - Unsorted block images filesystem commands"
+ depends on CMD_UBI
+ select CRC32
+ select RBTREE if ARCH_SUNXI
+ select LZO if ARCH_SUNXI
+ default y if NAND_SUNXI
+ help
+ UBIFS is a file system for flash devices which works on top of UBI.
+
endmenu