internal name) and clock frequency. Other information may be
available depending on the CPU driver.
+config CMD_FWU_METADATA
+ bool "fwu metadata read"
+ depends on FWU_MULTI_BANK_UPDATE
+ help
+ Command to read the metadata and dump it's contents
+
config CMD_LICENSE
bool "license"
select BUILD_BIN2C
There is no documentation about this within the U-Boot source code
but you should be able to find something on the interwebs.
+config THOR_RESET_OFF
+ bool "thor: Disable reset on completion"
+ depends on CMD_THOR_DOWNLOAD
+
config CMD_ZBOOT
bool "zboot - x86 boot command"
help
Load a binary over memory mapped.
config CMD_LOADS
- bool "loads"
+ bool "loads - Load a file over serial in S-Record format"
default y
help
Load an S-Record file over serial line
+config LOADS_ECHO
+ bool "Echo all characters received during a loads back to console"
+ depends on CMD_LOADS
+ help
+ If enabled, all characters received during a serial download (using
+ the "loads" command) are echoed back. This might be needed by some
+ terminal emulations (like "cu"), but may as well just take time on
+ others. This sets the initial value of the "loads_echo" environment
+ variable to 1.
+
+config CMD_SAVES
+ bool "saves - Save a file over serial in S-Record format"
+ help
+ Provides a way to save a binary file using the Motorola S-Record
+ format over the serial line.
+
+config SYS_LOADS_BAUD_CHANGE
+ bool "Enable a temporary baudrate change during loads/saves command"
+ depends on CMD_LOADS || CMD_SAVES
+
config CMD_LOADXY_TIMEOUT
int "loadxy_timeout"
range 0 2000
Attachment, where AT refers to an IBM AT (Advanced Technology)
computer released in 1984.
-config CMD_SAVES
- bool "saves - Save a file over serial in S-Record format"
- help
- Provides a way to save a binary file using the Motorola S-Record
- format over the serial line.
-
config CMD_SCSI
bool "scsi - Access to SCSI devices"
default y if SCSI
is complete. Enable this option to disable this behavior and instead
require files to be loaded over the network by subsequent commands.
+config CMD_WGET
+ bool "wget"
+ select PROT_TCP
+ help
+ wget is a simple command to download kernel, or other files,
+ from a http server over TCP.
+
config CMD_MII
bool "mii"
imply CMD_MDIO
help
Send ICMP ECHO_REQUEST to network host
+config CMD_PING6
+ bool "ping6"
+ depends on IPV6
+ default y if (CMD_PING && IPV6)
+ help
+ Send ICMPv6 ECHO_REQUEST to network host
+
config CMD_CDP
bool "cdp"
help
help
Acquire a network IP address using the link-local protocol
+config CMD_NCSI
+ bool "ncsi"
+ depends on PHY_NCSI
+ help
+ Manually configure the attached NIC via NC-SI.
+ Normally this happens automatically before other network
+ operations.
+
endif
config CMD_ETHSW
config CMD_BMP
bool "Enable 'bmp' command"
- depends on LCD || DM_VIDEO || VIDEO
+ depends on VIDEO
help
This provides a way to obtain information about a BMP-format image
and to display it. BMP (which presumably stands for BitMaP) is a
config CMD_CLS
bool "Enable clear screen command 'cls'"
- default y if LCD
+ default y if LCD || VIDEO
help
Enable the 'cls' command which clears the screen contents
on video frame buffer.
The two commands are very similar except for the endianness of the
output.
+config CMD_VIDCONSOLE
+ bool "lcdputs and setcurs"
+ depends on VIDEO
+ default y
+ help
+ Enabling this will provide 'setcurs' and 'lcdputs' commands which
+ support cursor positioning and drawing strings on the video
+ console (framebuffer).
+
+ The name 'lcdputs' is a bit of a misnomer, but so named because the
+ video device is often an LCD.
+
endmenu
source "cmd/ti/Kconfig"
config MTDIDS_DEFAULT
string "Default MTD IDs"
depends on MTD || SPI_FLASH
+ depends on !SYS_MTDPARTS_RUNTIME
help
Defines a default MTD IDs list for use with MTD partitions in the
Linux MTD command line partitions format.
config MTDPARTS_DEFAULT
string "Default MTD partition scheme"
depends on MTD || SPI_FLASH
+ depends on !SYS_MTDPARTS_RUNTIME
help
Defines a default MTD partitioning scheme in the Linux MTD command
line partitions format
config CMD_EVENT
bool "event - Show information about events"
+ depends on EVENT
default y if EVENT_DEBUG
help
This enables the 'event' command which provides information about