project(dbus)
-#########################################################################
-# detect version
-#########################################################################
-file (READ ../configure.ac configure_ac)
-string (REGEX REPLACE ".*dbus_major_version], .([0-9]+).*" "\\1" DBUS_MAJOR_VERSION ${configure_ac})
-string (REGEX REPLACE ".*dbus_minor_version], .([0-9]+).*" "\\1" DBUS_MINOR_VERSION ${configure_ac})
-string (REGEX REPLACE ".*dbus_micro_version], .([0-9]+).*" "\\1" DBUS_MICRO_VERSION ${configure_ac})
-# used by file version info
-set (DBUS_PATCH_VERSION "0")
-set (DBUS_VERSION ${DBUS_MAJOR_VERSION}.${DBUS_MINOR_VERSION}.${DBUS_MICRO_VERSION})
-
-set (DBUS_VERSION_STRING "${DBUS_VERSION}")
-
# we need to be up to date
CMAKE_MINIMUM_REQUIRED(VERSION 2.4.4 FATAL_ERROR)
if(COMMAND cmake_policy)
# where to look first for cmake modules, before ${CMAKE_ROOT}/Modules/ is checked
set(CMAKE_MODULE_PATH "${CMAKE_SOURCE_DIR}/modules")
+# detect version
+include(MacrosAutotools)
+autoversion(../configure.ac dbus)
+# used by file version info
+set (DBUS_PATCH_VERSION "0")
+
include(Macros)
TIMESTAMP(DBUS_BUILD_TIMESTAMP)
option (DBUS_USE_EXPAT "Use expat (== ON) or libxml2 (==OFF)" ON)
if(NOT WIN32)
- OPTION(DBUS_ENABLE_ABSTRACT_SOCKETS "enable support for abstract sockets" ON)
+ option (DBUS_ENABLE_ABSTRACT_SOCKETS "enable support for abstract sockets" ON)
endif(NOT WIN32)
#AC_ARG_ENABLE(asserts, AS_HELP_STRING([--enable-asserts],[include assertion checks]),enable_asserts=$enableval,enable_asserts=$USE_MAINTAINER_MODE)
-OPTION(DBUS_DISABLE_ASSERTS "Disable assertion checking" OFF)
+option (DBUS_DISABLE_ASSERTS "Disable assertion checking" OFF)
+
+option (DBUS_ENABLE_STATS "enable bus daemon usage statistics" OFF)
option (DBUS_ENABLE_STATS "enable bus daemon usage statistics" OFF)
# TODO: take check from configure.in
#AC_ARG_ENABLE(tests, AS_HELP_STRING([--enable-tests],[enable unit test code]),enable_tests=$enableval,enable_tests=$USE_MAINTAINER_MODE)
-OPTION(DBUS_BUILD_TESTS "enable unit test code" ON)
+option (DBUS_BUILD_TESTS "enable unit test code" ON)
if(DBUS_BUILD_TESTS)
add_definitions(-DDBUS_BUILD_TESTS -DDBUS_ENABLE_EMBEDDED_TESTS)
endif(DBUS_BUILD_TESTS)
-OPTION(DBUS_USE_OUTPUT_DEBUG_STRING "enable win32 debug port for message output" OFF)
+option (DBUS_USE_OUTPUT_DEBUG_STRING "enable win32 debug port for message output" OFF)
if(DBUS_USE_OUTPUT_DEBUG_STRING)
add_definitions(-DDBUS_USE_OUTPUT_DEBUG_STRING)
endif(DBUS_USE_OUTPUT_DEBUG_STRING)
if(WIN32)
# win32 dbus service support - this support is not complete
- OPTION(DBUS_SERVICE "enable dbus service installer" OFF)
+ option (DBUS_SERVICE "enable dbus service installer" OFF)
endif(WIN32)
#AC_ARG_ENABLE(ansi, AS_HELP_STRING([--enable-ansi],[enable -ansi -pedantic gcc flags]),enable_ansi=$enableval,enable_ansi=no)
-OPTION(DBUS_ENABLE_ANSI "enable -ansi -pedantic gcc flags" OFF)
+option (DBUS_ENABLE_ANSI "enable -ansi -pedantic gcc flags" OFF)
if(DBUS_ENABLE_ANSI)
if(NOT MSVC)
add_definitions(-ansi -D_POSIX_C_SOURCE=199309L -D_BSD_SOURCE -pedantic)
endif(DBUS_ENABLE_ANSI)
#AC_ARG_ENABLE(verbose-mode, AS_HELP_STRING([--enable-verbose-mode],[support verbose debug mode]),enable_verbose_mode=$enableval,enable_verbose_mode=$USE_MAINTAINER_MODE)
-OPTION(DBUS_ENABLE_VERBOSE_MODE "support verbose debug mode" ON)
+option (DBUS_ENABLE_VERBOSE_MODE "support verbose debug mode" ON)
#AC_ARG_ENABLE(checks, AS_HELP_STRING([--enable-checks],[include sanity checks on public API]),enable_checks=$enableval,enable_checks=yes)
-OPTION(DBUS_DISABLE_CHECKS "Disable public API sanity checking" OFF)
+option (DBUS_DISABLE_CHECKS "Disable public API sanity checking" OFF)
if(NOT MSVC)
#AC_ARG_ENABLE(gcov, AS_HELP_STRING([--enable-gcov],[compile with coverage profiling instrumentation (gcc only)]),enable_gcov=$enableval,enable_gcov=no)
- OPTION(DBUS_GCOV_ENABLED "compile with coverage profiling instrumentation (gcc only)" OFF)
+ option (DBUS_GCOV_ENABLED "compile with coverage profiling instrumentation (gcc only)" OFF)
if(DBUS_GCOV_ENABLED)
add_definitions(-fprofile-arcs -ftest-coverage)
# FIXME!!!!
#AC_ARG_ENABLE(dnotify, AS_HELP_STRING([--enable-dnotify],[build with dnotify support (linux only)]),enable_dnotify=$enableval,enable_dnotify=auto)
if("${CMAKE_SYSTEM_NAME}" STREQUAL "Linux")
- OPTION(DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX "build with dnotify support (linux only)" ON) # add a check !
+ option (DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX "build with dnotify support (linux only)" ON) # add a check !
endif("${CMAKE_SYSTEM_NAME}" STREQUAL "Linux")
#AC_ARG_ENABLE(kqueue, AS_HELP_STRING([--enable-kqueue],[build with kqueue support (FreeBSD only)]),enable_kqueue=$enableval,enable_kqueue=auto)
#AC_ARG_ENABLE(console-owner-file, AS_HELP_STRING([--enable-console-owner-file],[enable console owner file]),enable_console_owner_file=$enableval,enable_console_owner_file=auto)
STRING(TOUPPER ${CMAKE_SYSTEM_NAME} sysname)
if("${sysname}" MATCHES ".*SOLARIS.*")
- OPTION(HAVE_CONSOLE_OWNER_FILE "enable console owner file (solaris only)" ON)
+ option (HAVE_CONSOLE_OWNER_FILE "enable console owner file (solaris only)" ON)
if(HAVE_CONSOLE_OWNER_FILE)
set (DBUS_CONSOLE_OWNER_FILE "/dev/console" CACHE STRING "Directory to check for console ownerhip")
endif(HAVE_CONSOLE_OWNER_FILE)
set (DBUS_USE_ATOMIC_INT_486 ${atomic_int_486} CACHE STRING "Use atomic integer implementation for 486")
if(X11_FOUND)
- OPTION(DBUS_BUILD_X11 "Build with X11 autolaunch support " ON)
+ option (DBUS_BUILD_X11 "Build with X11 autolaunch support " ON)
endif(X11_FOUND)
# test binary names
if (WIN32)
set (EXT ".exe")
+ # compatible with Automake .in files
+ set (EXEEXT ".exe")
endif(WIN32)
if (MSVC_IDE)
if(CMAKE_BUILD_TYPE MATCHES Debug)
- set(IDE_BIN Debug/ )
+ set(IDE_BIN /Debug )
message(STATUS)
message(STATUS "Visual Studio: test programs will only work with 'Debug' configuration!")
message(STATUS "To run tests with 'Release' configuration use -DCMAKE_BUILD_TYPE=Release")
message(STATUS "Add '..\\..\\test\\data' to the command line option of the test programs")
message(STATUS)
else(CMAKE_BUILD_TYPE MATCHES Debug)
- set(IDE_BIN Release/)
+ set(IDE_BIN /Release)
message(STATUS)
message(STATUS "Visual Studio: test programs will only work with 'Release' configuration!")
message(STATUS "To run tests with 'Debug' configuration use -DCMAKE_BUILD_TYPE=Debug")
endif (MSVC_IDE)
set(TEST_SERVICE_DIR ${CMAKE_BINARY_DIR}/test/data/valid-service-files CACHE STRING "Full path to test file test/data/valid-service-files in builddir" )
-set(TEST_SERVICE_BINARY ${CMAKE_BINARY_DIR}/bin/${IDE_BIN}test-service${EXT} CACHE STRING "Full path to test file test/test-service in builddir" ${TEST_PATH_FORCE})
-set(TEST_SHELL_SERVICE_BINARY ${CMAKE_BINARY_DIR}/bin/${IDE_BIN}test-shell-service${EXT} CACHE STRING "Full path to test file test/test-shell-service in builddir" ${TEST_PATH_FORCE})
-set(TEST_EXIT_BINARY ${CMAKE_BINARY_DIR}/bin/${IDE_BIN}test-exit${EXT} CACHE STRING "Full path to test file test/test-exit in builddir" ${TEST_PATH_FORCE})
-set(TEST_SEGFAULT_BINARY ${CMAKE_BINARY_DIR}/bin/${IDE_BIN}test-segfault${EXT} CACHE STRING "Full path to test file test/test-segfault in builddir" ${TEST_PATH_FORCE})
-set(TEST_SLEEP_FOREVER_BINARY ${CMAKE_BINARY_DIR}/bin/${IDE_BIN}test-sleep-forever${EXT} CACHE STRING "Full path to test file test/test-sleep-forever in builddir" ${TEST_PATH_FORCE})
#### Find socket directories
if (NOT $ENV{TMPDIR} STREQUAL "")
if (WIN32)
- set (DBUS_SYSTEM_BUS_DEFAULT_ADDRESS "nonce-tcp:" CACHE STRING "system bus default address" )
- set (DBUS_SESSION_BUS_DEFAULT_ADDRESS "nonce-tcp:" CACHE STRING "session bus default address" )
+ set (DBUS_SYSTEM_BUS_DEFAULT_ADDRESS "nonce-tcp:" CACHE STRING "system bus default address")
+ set (DBUS_SESSION_BUS_DEFAULT_ADDRESS "nonce-tcp:" CACHE STRING "session bus default address")
set (DBUS_SYSTEM_CONFIG_FILE "etc/dbus-1/system.conf")
set (DBUS_SESSION_CONFIG_FILE "etc/dbus-1/session.conf")
# bus-test expects a non empty string
set (DBUS_USER "Administrator")
else (WIN32)
- set (DBUS_SYSTEM_BUS_DEFAULT_ADDRESS "unix:tmpdir=" CACHE STRING "system bus default address" )
- set (DBUS_SESSION_BUS_DEFAULT_ADDRESS "unix:path=${DBUS_SESSION_SOCKET_DIR}" CACHE STRING "session bus default address" )
+ set (DBUS_SYSTEM_BUS_DEFAULT_ADDRESS "unix:tmpdir=" CACHE STRING "system bus default address")
+ set (DBUS_SESSION_BUS_DEFAULT_ADDRESS "unix:path=${DBUS_SESSION_SOCKET_DIR}" CACHE STRING "session bus default address")
set (sysconfdir "")
set (configdir ${sysconfdir}/dbus-1 )
set (DBUS_SYSTEM_CONFIG_FILE ${configdir}/system.conf)
set (DBUS_USER "root")
endif (WIN32)
-set(DBUS_DAEMON_NAME dbus-daemon CACHE STRING "The name of the dbus daemon executable")
+set (DBUS_DAEMON_NAME "dbus-daemon" CACHE STRING "The name of the dbus daemon executable")
########### create config.h ###############
# compiler definitions
add_definitions(-DHAVE_CONFIG_H=1)
-add_definitions(${DBUS_BUS_CFLAGS} -DDBUS_API_SUBJECT_TO_CHANGE)
+add_definitions(${DBUS_BUS_CFLAGS})
if (DBUS_BUILD_TESTS)
# set variables used for the .in files (substituted by configure_file) in test/data:
- set(TEST_VALID_SERVICE_DIR ${CMAKE_BINARY_DIR}/test/data/valid-service-files)
- set(TEST_VALID_SERVICE_SYSTEM_DIR ${CMAKE_BINARY_DIR}/test/data/valid-service-files-system)
- set(TEST_INVALID_SERVICE_SYSTEM_DIR ${CMAKE_BINARY_DIR}/test/data/invalid-service-files-system)
+ set(DBUS_TEST_EXEC ${EXECUTABLE_OUTPUT_PATH}${IDE_BIN})
+ set(DBUS_TEST_DATA ${CMAKE_BINARY_DIR}/test/data)
set(TEST_SOCKET_DIR ${DBUS_SESSION_SOCKET_DIR} )
set(TEST_LAUNCH_HELPER_BINARY ${EXECUTABLE_OUTPUT_PATH}/dbus-daemon-launch-helper-test)
- set(TEST_PRIVSERVER_BINARY ${EXECUTABLE_OUTPUT_PATH}/test-privserver)
if (UNIX)
set (TEST_LISTEN "debug-pipe:name=test-server</listen><listen>unix:tmpdir=${TEST_SOCKET_DIR}")
set (TEST_CONNECTION "debug-pipe:name=test-server")
MESSAGE(" ")
INCLUDE(modules/CPackInstallConfig.cmake)
+
+add_custom_target(help-options
+ cmake -LH
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+)
projects / platform / upstream / dbus.git / blobdiff