call "%__ThisScriptDir%"\setup_vs_tools.cmd
if NOT '%ERRORLEVEL%' == '0' exit /b 1
-if defined VS150COMNTOOLS (
+if defined VS160COMNTOOLS (
+ set "__VSToolsRoot=%VS160COMNTOOLS%"
+ set "__VCToolsRoot=%VS160COMNTOOLS%\..\..\VC\Auxiliary\Build"
+ set __VSVersion=vs2019
+) else if defined VS150COMNTOOLS (
set "__VSToolsRoot=%VS150COMNTOOLS%"
set "__VCToolsRoot=%VS150COMNTOOLS%\..\..\VC\Auxiliary\Build"
set __VSVersion=vs2017
-) else (
- set "__VSToolsRoot=%VS140COMNTOOLS%"
- set "__VCToolsRoot=%VS140COMNTOOLS%\..\..\VC"
- set __VSVersion=vs2015
)
:: Set the default arguments for build
set "__TestDir=%__ProjectDir%\tests"
set "__ProjectFilesDir=%__TestDir%"
set "__SourceDir=%__ProjectDir%\src"
-set "__PackagesDir=%__ProjectDir%\packages"
+set "__PackagesDir=%__ProjectDir%\.packages"
set "__RootBinDir=%__ProjectDir%\bin"
set "__LogsDir=%__RootBinDir%\Logs"
+set "__MsbuildDebugLogsDir=%__LogsDir%\MsbuildDebugLogs"
:: Default __Exclude to issues.targets
set __Exclude=%__TestDir%\issues.targets
set __UnprocessedBuildArgs=
set __CommonMSBuildArgs=
-set __BuildAgainstPackagesArg=
set __SkipRestorePackages=
set __SkipManaged=
set __SkipNative=
set __RuntimeId=
-set __ZipTests=
set __TargetsWindows=1
set __DoCrossgen=
if /i "%1" == "skipmanaged" (set __SkipManaged=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
if /i "%1" == "skipnative" (set __SkipNative=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
if /i "%1" == "buildtesthostonly" (set __SkipNative=1&set __SkipManaged=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
-if /i "%1" == "buildagainstpackages" (set __ZipTests=1&set __BuildAgainstPackagesArg=/p:BuildTestsAgainstPackages=true&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
+if /i "%1" == "buildagainstpackages" (echo error: Remove /BuildAgainstPackages switch&&exit /b1)
if /i "%1" == "skiprestorepackages" (set __SkipRestorePackages=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
-if /i "%1" == "ziptests" (set __ZipTests=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
if /i "%1" == "crossgen" (set __DoCrossgen=1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
if /i "%1" == "runtimeid" (set __RuntimeId=%2&set processedArgs=!processedArgs! %1 %2&shift&shift&goto Arg_Loop)
if /i "%1" == "targetsNonWindows" (set __TargetsWindows=0&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
set "__PriorityArg=/p:CLRTestPriorityToBuild=%__Priority%"
)
-if defined __BuildAgainstPackagesArg (
- if not defined __RuntimeID (
- echo %__MsgPrefix%Error: When building against packages, you must supply a target Runtime ID.
- exit /b 1
- )
-)
-
set TargetsWindowsArg=
set TargetsWindowsMsbuildArg=
if "%__TargetsWindows%"=="1" (
if not exist "%__NativeTestIntermediatesDir%" md "%__NativeTestIntermediatesDir%"
if not exist "%__ManagedTestIntermediatesDir%" md "%__ManagedTestIntermediatesDir%"
if not exist "%__LogsDir%" md "%__LogsDir%"
+if not exist "%__MsbuildDebugLogsDir%" md "%__MsbuildDebugLogsDir%"
+
+REM Set up the directory for MSBuild debug logs.
+set MSBUILDDEBUGPATH=%__MsbuildDebugLogsDir%
echo %__MsgPrefix%Checking prerequisites
REM =========================================================================================
call "%__ProjectDir%\init-tools.cmd"
+if NOT [%ERRORLEVEL%]==[0] (
+ exit /b %ERRORLEVEL%
+)
@if defined _echo @echo on
set "__ToolsDir=%__ProjectDir%\Tools"
-set "DotNetCli=%__ToolsDir%\dotnetcli\dotnet.exe"
-if not exist "%DotNetCli%" (
- echo %__MsgPrefix%"%DotNetCli%" not found after init-tools.
- exit /b 1
-)
REM =========================================================================================
REM ===
REM =========================================================================================
call "%__TestDir%\setup-stress-dependencies.cmd" /arch %__BuildArch% /outputdir %__BinDir%
+if errorlevel 1 (
+ echo %__MsgPrefix%Error: setup-stress-dependencies failed.
+ goto :Exit_Failure
+)
@if defined _echo @echo on
REM =========================================================================================
if not exist "%VSINSTALLDIR%DIA SDK" goto NoDIA
pushd "%__NativeTestIntermediatesDir%"
-call "%__SourceDir%\pal\tools\gen-buildsys-win.bat" ""%__ProjectFilesDir%"" %__VSVersion% %__BuildArch%
+set __ExtraCmakeArgs="-DCMAKE_SYSTEM_VERSION=10.0"
+call "%__SourceDir%\pal\tools\gen-buildsys-win.bat" ""%__ProjectFilesDir%"" %__VSVersion% %__BuildArch% !__ExtraCmakeArgs!
@if defined _echo @echo on
popd
set __MsbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
set __Logging=!__MsbuildLog! !__MsbuildWrn! !__MsbuildErr!
-call "%__ProjectDir%\msbuild.cmd" /nologo /verbosity:minimal /clp:Summary /nodeReuse:false^
+call "%__ProjectDir%\cmake_msbuild.cmd" /nologo /verbosity:minimal /clp:Summary /nodeReuse:false^
/l:BinClashLogger,Tools/net46/Microsoft.DotNet.Build.Tasks.dll;LogFile=binclash.log^
/p:RestoreDefaultOptimizationDataPackage=false /p:PortableBuild=true^
/p:UsePartialNGENOptimization=false /maxcpucount^
set __MsbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
set __Logging=!__MsbuildLog! !__MsbuildWrn! !__MsbuildErr!
-call "%__ProjectDir%\msbuild.cmd" /nologo /verbosity:minimal /clp:Summary /nodeReuse:false^
- /l:BinClashLogger,Tools/net46/Microsoft.DotNet.Build.Tasks.dll;LogFile=binclash.log^
+call "%__ProjectDir%\dotnet.cmd" msbuild /nologo /verbosity:minimal /clp:Summary /nodeReuse:false^
+ /l:BinClashLogger,Tools/Microsoft.DotNet.Build.Tasks.dll;LogFile=binclash.log^
/p:RestoreDefaultOptimizationDataPackage=false /p:PortableBuild=true^
/p:UsePartialNGENOptimization=false /maxcpucount^
%__ProjectDir%\tests\build.proj /t:BatchRestorePackages^
- !__Logging! %__CommonMSBuildArgs% %__BuildAgainstPackagesArg% %__PriorityArg% %__UnprocessedBuildArgs%
-
-if not defined __BuildAgainstPackagesArg goto SkipRestoreProduct
-
-echo %__MsgPrefix%BinPlacing CoreLib
-
-set __BuildLogRootName=Tests_GenerateRuntimeLayout
-set __BuildLog=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.log
-set __BuildWrn=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.wrn
-set __BuildErr=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.err
-set __MsbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
-set __MsbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
-set __MsbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
-set __Logging=!__MsbuildLog! !__MsbuildWrn! !__MsbuildErr!
-
-call "%__ProjectDir%\msbuild.cmd" /nologo /verbosity:minimal /clp:Summary /nodeReuse:false^
- /l:BinClashLogger,Tools/net46/Microsoft.DotNet.Build.Tasks.dll;LogFile=binclash.log^
- /p:RestoreDefaultOptimizationDataPackage=false /p:PortableBuild=true^
- /p:UsePartialNGENOptimization=false /maxcpucount^
- %__Projectdir%\tests\runtest.proj /t:BinPlaceRef /t:BinPlaceProduct /t:CopyCrossgenToProduct /p:RuntimeId="%__RuntimeId%"^
- !__Logging! %__CommonMSBuildArgs% %__BuildAgainstPackagesArg% %__PriorityArg% %__UnprocessedBuildArgs%
-if errorlevel 1 (
- echo %__MsgPrefix%Error: BinPlace of mscorlib.dll failed. Refer to the build log files for details:
- echo %__BuildLog%
- echo %__BuildWrn%
- echo %__BuildErr%
- exit /b 1
-)
+ !__Logging! %__CommonMSBuildArgs% %__PriorityArg% %__UnprocessedBuildArgs%
:SkipRestoreProduct
set __SkipPackageRestore=false
set __SkipTargetingPackBuild=false
-set __BuildLoopCount=2
-set __TestGroupToBuild=1
+set __NumberOfTestGroups=3
-if %__Priority% GTR 0 (set __BuildLoopCount=16&set __TestGroupToBuild=2)
-echo %__MsgPrefix%Building tests group %__TestGroupToBuild% with %__BuildLoopCount% subgroups
+if %__Priority% GTR 0 (set __NumberOfTestGroups=10)
+echo %__MsgPrefix%Building tests divided into %__NumberOfTestGroups% test groups
-for /l %%G in (1, 1, %__BuildLoopCount%) do (
+for /l %%G in (1, 1, %__NumberOfTestGroups%) do (
set __MsbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%";Append=!__AppendToLog!
set __MsbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%";Append=!__AppendToLog!
set __MsbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%";Append=!__AppendToLog!
- set TestBuildSlice=%%G
- echo Running: msbuild %__ProjectDir%\tests\build.proj !__MsbuildLog! !__MsbuildWrn! !__MsbuildErr! %TargetsWindowsMsbuildArg% %__msbuildArgs% %__BuildAgainstPackagesArg% !__PriorityArg! %__UnprocessedBuildArgs%
+ set __TestGroupToBuild=%%G
+ echo Running: msbuild %__ProjectDir%\tests\build.proj !__MsbuildLog! !__MsbuildWrn! !__MsbuildErr! %TargetsWindowsMsbuildArg% %__msbuildArgs% !__PriorityArg! %__UnprocessedBuildArgs%
- call msbuild %__ProjectDir%\tests\build.proj !__MsbuildLog! !__MsbuildWrn! !__MsbuildErr! %TargetsWindowsMsbuildArg% %__msbuildArgs% %__BuildAgainstPackagesArg% !__PriorityArg! %__UnprocessedBuildArgs%
+ call "%__ProjectDir%\dotnet.cmd" msbuild %__ProjectDir%\tests\build.proj !__MsbuildLog! !__MsbuildWrn! !__MsbuildErr! %TargetsWindowsMsbuildArg% %__msbuildArgs% !__PriorityArg! %__UnprocessedBuildArgs%
if errorlevel 1 (
echo %__MsgPrefix%Error: build failed. Refer to the build log files for details:
REM Check that we've built about as many tests as we expect. This is primarily intended to prevent accidental changes that cause us to build
REM drastically fewer Pri-1 tests than expected.
echo %__MsgPrefix%Check the managed tests build
-echo Running: msbuild %__ProjectDir%\tests\runtest.proj /t:CheckTestBuild /p:CLRTestPriorityToBuild=%__Priority% %__msbuildArgs% %__unprocessedBuildArgs%
-call msbuild %__ProjectDir%\tests\runtest.proj /t:CheckTestBuild /p:CLRTestPriorityToBuild=%__Priority% %__msbuildArgs% %__unprocessedBuildArgs%
+echo Running: dotnet msbuild %__ProjectDir%\tests\runtest.proj /t:CheckTestBuild /p:CLRTestPriorityToBuild=%__Priority% %__msbuildArgs% %__unprocessedBuildArgs%
+call "%__ProjectDir%\dotnet.cmd" msbuild %__ProjectDir%\tests\runtest.proj /t:CheckTestBuild /p:CLRTestPriorityToBuild=%__Priority% %__msbuildArgs% %__unprocessedBuildArgs%
if errorlevel 1 (
echo %__MsgPrefix%Error: build failed.
exit /b 1
if exist "%CORE_ROOT_STAGE%" rd /s /q "%CORE_ROOT_STAGE%"
md "%CORE_ROOT%"
md "%CORE_ROOT_STAGE%"
-xcopy "%__BinDir%" "%CORE_ROOT_STAGE%"
-
-if defined __BuildAgainstPackagesArg (
- if "%__TargetsWindows%"=="0" (
-
- if not exist %__PackagesDir%\TestNativeBins (
- echo %__MsgPrefix%Error: Ensure you have run sync.cmd -ab before building a non-Windows test overlay against packages
- exit /b 1
- )
-
- for /R %__PackagesDir%\TestNativeBins\%__RuntimeId%\%__BuildType% %%f in (*.so) do copy %%f %CORE_ROOT_STAGE%
- for /R %__PackagesDir%\TestNativeBins\%__RuntimeId%\%__BuildType% %%f in (*.dylib) do copy %%f %CORE_ROOT_STAGE%
- )
-)
+xcopy /s "%__BinDir%" "%CORE_ROOT_STAGE%"
REM =========================================================================================
REM ===
set __MsbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
set __Logging=!__MsbuildLog! !__MsbuildWrn! !__MsbuildErr!
-call %__ProjectDir%\msbuild.cmd /nologo /verbosity:minimal /clp:Summary /nodeReuse:false^
- /l:BinClashLogger,Tools/net46/Microsoft.DotNet.Build.Tasks.dll;LogFile=binclash.log^
+call %__ProjectDir%\dotnet.cmd msbuild /nologo /verbosity:minimal /clp:Summary /nodeReuse:false^
+ /l:BinClashLogger,Tools/Microsoft.DotNet.Build.Tasks.dll;LogFile=binclash.log^
/p:RestoreDefaultOptimizationDataPackage=false /p:PortableBuild=true^
/p:UsePartialNGENOptimization=false /maxcpucount^
%__ProjectDir%\tests\runtest.proj /t:CreateTestOverlay^
set __MsbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
set __Logging=!__MsbuildLog! !__MsbuildWrn! !__MsbuildErr!
-call %__ProjectDir%\msbuild.cmd /nologo /verbosity:minimal /clp:Summary /nodeReuse:false^
- /l:BinClashLogger,Tools/net46/Microsoft.DotNet.Build.Tasks.dll;LogFile=binclash.log^
+call %__ProjectDir%\dotnet.cmd msbuild /nologo /verbosity:minimal /clp:Summary /nodeReuse:false^
+ /l:BinClashLogger,Tools/Microsoft.DotNet.Build.Tasks.dll;LogFile=binclash.log^
/p:RestoreDefaultOptimizationDataPackage=false /p:PortableBuild=true^
/p:UsePartialNGENOptimization=false /maxcpucount^
%__ProjectDir%\tests\runtest.proj /t:CreateTestHost^
set __Logging=!__MsbuildLog! !__MsbuildWrn! !__MsbuildErr!
REM Build wrappers using the local SDK's msbuild. As we move to arcade, the other builds should be moved away from run.exe as well.
-call %DotNetCli% msbuild %__ProjectDir%\tests\runtest.proj /p:RestoreAdditionalProjectSources=https://dotnet.myget.org/F/dotnet-core/ /p:BuildWrappers=true !__Logging! %__msbuildArgs% %TargetsWindowsMsbuildArg% %__BuildAgainstPackagesArg% %__UnprocessedBuildArgs%
+call "%__ProjectDir%\dotnet.cmd" msbuild %__ProjectDir%\tests\runtest.proj /p:RestoreAdditionalProjectSources=https://dotnet.myget.org/F/dotnet-core/ /p:BuildWrappers=true !__Logging! %__msbuildArgs% %TargetsWindowsMsbuildArg% %__UnprocessedBuildArgs%
if errorlevel 1 (
echo %__MsgPrefix%Error: Xunit wrapper build failed. Refer to the build log files for details:
echo %__BuildLog%
REM =========================================================================================
REM ===
-REM === Prep test binaries for Helix publishing
-REM ===
-REM =========================================================================================
-
-if not defined __ZipTests goto SkipPrepForPublish
-
-echo %__MsgPrefix%Preparing test binaries for Helix publishing
-
-set __BuildLogRootName=Helix_Prep
-set __BuildLog=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.log
-set __BuildWrn=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.wrn
-set __BuildErr=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.err
-set __MsbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
-set __MsbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
-set __MsbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
-set __Logging=!__MsbuildLog! !__MsbuildWrn! !__MsbuildErr!
-
-call %__ProjectDir%\msbuild.cmd /nologo /verbosity:minimal /clp:Summary /nodeReuse:false^
- /l:BinClashLogger,Tools/net46/Microsoft.DotNet.Build.Tasks.dll;LogFile=binclash.log^
- /p:RestoreDefaultOptimizationDataPackage=false /p:PortableBuild=true^
- /p:UsePartialNGENOptimization=false /maxcpucount^
- %__ProjectDir%\tests\helixprep.proj^
- !__Logging! %__CommonMSBuildArgs% %RuntimeIdArg% %TargetsWindowsMSBuildArg% %__CrossgenArg% %__PriorityArg% %__UnprocessedBuildArgs%
-if errorlevel 1 (
- echo %__MsgPrefix%Error: build failed. Refer to the build log files for details:
- echo %__BuildLog%
- echo %__BuildWrn%
- echo %__BuildErr%
- exit /b 1
-)
-
-:SkipPrepForPublish
-
-REM =========================================================================================
-REM ===
REM === All builds complete!
REM ===
REM =========================================================================================
echo skipmanaged: skip the managed tests build
echo skipnative: skip the native tests build
echo buildtesthostonly: build the CoreFX testhost only
-echo buildagainstpackages: builds tests against restored packages, instead of against a built product.
echo skiprestorepackages: skip package restore
echo runtimeid ^<ID^>: Builds a test overlay for the specified OS ^(Only supported when building against packages^). Supported IDs are:
echo alpine.3.4.3-x64: Builds overlay for Alpine 3.4.3
echo ubuntu.16.10-x64: Builds overlay for Ubuntu 16.10
echo win-x64: Builds overlay for portable Windows
echo win7-x64: Builds overlay for Windows 7
-echo ziptests: zips CoreCLR tests and Core_Root for a Helix run
echo crossgen: Precompiles the framework managed assemblies
echo targetsNonWindows:
echo Exclude- Optional parameter - specify location of default exclusion file ^(defaults to tests\issues.targets if not specified^)
of the previous version to "%VSINSTALLDIR%" and then build.
REM DIA SDK not included in Express editions
echo Visual Studio Express does not include the DIA SDK. ^
-You need Visual Studio 2015 or 2017 (Community is free).
+You need Visual Studio 2017 or 2019 (Community is free).
echo See: https://github.com/dotnet/coreclr/blob/master/Documentation/project-docs/developer-guide.md#prerequisites
exit /b 1
REM don't precompile anything from CoreCLR
if /I exist %CORE_ROOT_STAGE%\%2 exit /b 0
-"%CORE_ROOT_STAGE%\crossgen.exe" /Platform_Assemblies_Paths "%CORE_ROOT%" /in "%1" /out "%CORE_ROOT%/temp.ni.dll" >nul 2>nul
+REM Don't precompile xunit.* files
+echo "%2" | findstr /b "xunit." >nul && (
+ exit /b 0
+)
+
+set __CrossgenExe="%CORE_ROOT_STAGE%\crossgen.exe"
+if /i "%__BuildArch%" == "arm" ( set __CrossgenExe="%CORE_ROOT_STAGE%\x86\crossgen.exe" )
+if /i "%__BuildArch%" == "arm64" ( set __CrossgenExe="%CORE_ROOT_STAGE%\x64\crossgen.exe" )
+
+"%__CrossgenExe%" /Platform_Assemblies_Paths "%CORE_ROOT%" /in "%1" /out "%CORE_ROOT%/temp.ni.dll" >nul 2>nul
set /a __exitCode = %errorlevel%
if "%__exitCode%" == "-2146230517" (
echo %2 is not a managed assembly.
)
if %__exitCode% neq 0 (
- echo Unable to precompile %2
+ echo Unable to precompile %2, Exit Code is %__exitCode%
exit /b 0
)
projects / platform / upstream / coreclr.git / blobdiff