@if not defined _echo @echo off
-setlocal EnableDelayedExpansion
-
-:: Set the default arguments for build
-set __BuildArch=x64
-set __VCBuildArch=x86_amd64
-set __BuildType=Debug
-set __BuildOS=Windows_NT
-
-set "__ProjectDir=%~dp0"
+setlocal EnableDelayedExpansion EnableExtensions
:: Define a prefix for most output progress messages that come from this script. That makes
:: it easier to see where these are coming from. Note that there is a trailing space here.
set "__MsgPrefix=BUILDTEST: "
-call "%__ProjectDir%"\setup_vs_tools.cmd
+echo %__MsgPrefix%Starting Build at %TIME%
-REM setup_vs_tools.cmd will correctly echo error message.
+set __ThisScriptDir="%~dp0"
+
+call "%__ThisScriptDir%"\setup_vs_tools.cmd
if NOT '%ERRORLEVEL%' == '0' exit /b 1
if defined VS150COMNTOOLS (
- set "__VSToolsRoot=%VS150COMNTOOLS%"
- set "__VCToolsRoot=%VS150COMNTOOLS%\..\..\VC\Auxiliary\Build"
- set __VSVersion=vs2017
+ set "__VSToolsRoot=%VS150COMNTOOLS%"
+ set "__VCToolsRoot=%VS150COMNTOOLS%\..\..\VC\Auxiliary\Build"
+ set __VSVersion=vs2017
) else (
- set "__VSToolsRoot=%VS140COMNTOOLS%"
- set "__VCToolsRoot=%VS140COMNTOOLS%\..\..\VC"
- set __VSVersion=vs2015
+ set "__VSToolsRoot=%VS140COMNTOOLS%"
+ set "__VCToolsRoot=%VS140COMNTOOLS%\..\..\VC"
+ set __VSVersion=vs2015
)
+:: Set the default arguments for build
+set __BuildArch=x64
+set __BuildType=Debug
+set __BuildOS=Windows_NT
+
+set "__ProjectDir=%~dp0"
:: remove trailing slash
if %__ProjectDir:~-1%==\ set "__ProjectDir=%__ProjectDir:~0,-1%"
set "__TestDir=%__ProjectDir%\tests"
:: Default __Exclude to issues.targets
set __Exclude=%__TestDir%\issues.targets
-REM __unprocessedBuildArgs are args that we pass to msbuild (e.g. /p:__BuildArch=x64)
+REM __UnprocessedBuildArgs are args that we pass to msbuild (e.g. /p:__BuildArch=x64)
set "__args= %*"
set processedArgs=
-set __unprocessedBuildArgs=
+set __UnprocessedBuildArgs=
set __RunArgs=
+
set __BuildAgainstPackagesArg=
set __BuildAgainstPackagesMsbuildArg=
set __SkipRestorePackages=
:Arg_Loop
if "%1" == "" goto ArgsDone
-if /i "%1" == "-?" goto Usage
-if /i "%1" == "-h" goto Usage
-if /i "%1" == "-help" goto Usage
+if /i "%1" == "/?" goto Usage
+if /i "%1" == "-?" goto Usage
+if /i "%1" == "/h" goto Usage
+if /i "%1" == "-h" goto Usage
+if /i "%1" == "/help" goto Usage
+if /i "%1" == "-help" goto Usage
+if /i "%1" == "--help" goto Usage
-if /i "%1" == "x64" (set __BuildArch=x64&set __VCBuildArch=x86_amd64&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
-if /i "%1" == "x86" (set __BuildArch=x86&set __VCBuildArch=x86&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
-if /i "%1" == "arm" (set __BuildArch=arm&set __VCBuildArch=x86_arm&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
-if /i "%1" == "arm64" (set __BuildArch=arm64&set __VCBuildArch=x86_arm64&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
+if /i "%1" == "x64" (set __BuildArch=x64&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
+if /i "%1" == "x86" (set __BuildArch=x86&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
+if /i "%1" == "arm" (set __BuildArch=arm&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
+if /i "%1" == "arm64" (set __BuildArch=arm64&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
if /i "%1" == "debug" (set __BuildType=Debug&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
if /i "%1" == "release" (set __BuildType=Release&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
if /i "%1" == "--" (set __PassThroughArg=%1&set processedArgs=!processedArgs! %1&shift&goto Arg_Loop)
if [!processedArgs!]==[] (
- set __UnprocessedBuildArgs=%__args%
+ set __UnprocessedBuildArgs=%__args%
) else (
- set __UnprocessedBuildArgs=%__args%
- for %%t in (!processedArgs!) do (
- set __UnprocessedBuildArgs=!__UnprocessedBuildArgs:*%%t=!
- )
+ set __UnprocessedBuildArgs=%__args%
+ for %%t in (!processedArgs!) do (
+ set __UnprocessedBuildArgs=!__UnprocessedBuildArgs:*%%t=!
+ )
)
:ArgsDone
@REM Special handling for -priority=N argument.
if %__Priority% GTR 0 (
set "__PriorityArg=-priority=%__Priority%"
- set "__PriorityMsbuildArg=/p:priority=%__Priority%"
+ set "__PriorityMsbuildArg=/p:CLRTestPriorityToBuild=%__Priority%"
)
if defined __BuildAgainstPackagesArg (
)
)
+set TargetsWindowsArg=
+set TargetsWindowsMsbuildArg=
+if "%__TargetsWindows%"=="1" (
+ set TargetsWindowsArg=-TargetsWindows=true
+ set TargetsWindowsMsbuildArg=/p:TargetsWindows=true
+) else if "%__TargetsWindows%"=="0" (
+ set TargetsWindowsArg=-TargetsWindows=false
+ set TargetsWindowsMsbuildArg=/p:TargetsWindows=false
+)
+
@if defined _echo @echo on
set __RunArgs=-BuildOS=%__BuildOS% -BuildType=%__BuildType% -BuildArch=%__BuildArch%
REM As we move from buildtools to arcade, __RunArgs should be replaced with __msbuildArgs
-set __msbuildArgs=/p:__BuildOS=%__BuildOS% /p:__BuildType=%__BuildType% /p:__BuildArch=%__BuildArch% /nologo /verbosity:minimal /clp:Summary
+set __msbuildArgs=/p:__BuildOS=%__BuildOS% /p:__BuildType=%__BuildType% /p:__BuildArch=%__BuildArch% /nologo /verbosity:minimal /clp:Summary /maxcpucount
-echo %__MsgPrefix%Commencing CoreCLR repo test build
+echo %__MsgPrefix%Commencing CoreCLR test build
set "__BinDir=%__RootBinDir%\Product\%__BuildOS%.%__BuildArch%.%__BuildType%"
set "__TestRootDir=%__RootBinDir%\tests"
set "__TestBinDir=%__TestRootDir%\%__BuildOS%.%__BuildArch%.%__BuildType%"
-:: We have different managed and native intermediate dirs because the managed bits will include
-:: the configuration information deeper in the intermediates path.
-:: These variables are used by the msbuild project files.
+
+REM We have different managed and native intermediate dirs because the managed bits will include
+REM the configuration information deeper in the intermediates path.
+REM These variables are used by the msbuild project files.
if not defined __TestIntermediateDir (
set "__TestIntermediateDir=tests\obj\%__BuildOS%.%__BuildArch%.%__BuildType%"
set "__NativeTestIntermediatesDir=%__RootBinDir%\%__TestIntermediateDir%\Native"
set "__ManagedTestIntermediatesDir=%__RootBinDir%\%__TestIntermediateDir%\Managed"
-:: Generate path to be set for CMAKE_INSTALL_PREFIX to contain forward slash
+REM Generate path to be set for CMAKE_INSTALL_PREFIX to contain forward slash
set "__CMakeBinDir=%__TestBinDir%"
set "__CMakeBinDir=%__CMakeBinDir:\=/%"
echo %__MsgPrefix%Checking prerequisites
-:: Eval the output from probe-win1.ps1
+REM Eval the output from probe-win1.ps1
for /f "delims=" %%a in ('powershell -NoProfile -ExecutionPolicy ByPass "& ""%__SourceDir%\pal\tools\probe-win.ps1"""') do %%a
REM =========================================================================================
REM === Restore Build Tools
REM ===
REM =========================================================================================
+
call "%__ProjectDir%\init-tools.cmd"
@if defined _echo @echo on
+
set "__ToolsDir=%__ProjectDir%\Tools"
-set "__DotnetHost=%__ToolsDir%\dotnetcli\dotnet.exe"
-if not exist "%__DotnetHost%" (
- echo %__DotnetHost% not found after init-tools.
- exit /b 1
+set "DotNetCli=%__ToolsDir%\dotnetcli\dotnet.exe"
+if not exist "%DotNetCli%" (
+ echo %__MsgPrefix%"%DotNetCli%" not found after init-tools.
+ exit /b 1
)
REM =========================================================================================
call "%__TestDir%\setup-stress-dependencies.cmd" /arch %__BuildArch% /outputdir %__BinDir%
@if defined _echo @echo on
-if defined __SkipNative goto skipnative
-
REM =========================================================================================
REM ===
REM === Native test build section
REM ===
REM =========================================================================================
+if defined __SkipNative goto skipnative
+
echo %__MsgPrefix%Commencing build of native test components for %__BuildArch%/%__BuildType%
-:: Set the environment for the native build
+REM Set the environment for the native build
+set __VCBuildArch=x86_amd64
+if /i "%__BuildArch%" == "x86" ( set __VCBuildArch=x86 )
+if /i "%__BuildArch%" == "arm" ( set __VCBuildArch=x86_arm )
+if /i "%__BuildArch%" == "arm64" ( set __VCBuildArch=x86_arm64 )
+
echo %__MsgPrefix%Using environment: "%__VCToolsRoot%\vcvarsall.bat" %__VCBuildArch%
call "%__VCToolsRoot%\vcvarsall.bat" %__VCBuildArch%
@if defined _echo @echo on
set __BuildLog=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.log
set __BuildWrn=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.wrn
set __BuildErr=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.err
-set __msbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
-set __msbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
-set __msbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
+set __MsbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
+set __MsbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
+set __MsbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
+set __Logging=-MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr!
-call "%__ProjectDir%\run.cmd" build -Project="%__NativeTestIntermediatesDir%\install.vcxproj" -MsBuildLog=!__msbuildLog! -MsBuildWrn=!__msbuildWrn! -MsBuildErr=!__msbuildErr! -configuration=%__BuildType% -platform=%__BuildArch% %__RunArgs% %__PriorityArg% %__PassThroughArg% %__unprocessedBuildArgs%
+call "%__ProjectDir%\run.cmd" build -Project="%__NativeTestIntermediatesDir%\install.vcxproj" !__Logging! -configuration=%__BuildType% -platform=%__BuildArch% %__RunArgs% %__PriorityArg% %__PassThroughArg% %__UnprocessedBuildArgs%
if errorlevel 1 (
echo %__MsgPrefix%Error: build failed. Refer to the build log files for details:
echo %__BuildLog%
:skipnative
-set "__TestWorkingDir=%__RootBinDir%\tests\%__BuildOS%.%__BuildArch%.%__BuildType%"
-if "%__SkipRestorePackages%" == 1 goto SkipRestoreProduct
REM =========================================================================================
REM ===
REM === Restore product binaries from packages
REM ===
REM =========================================================================================
-if not defined XunitTestBinBase set XunitTestBinBase=%__TestWorkingDir%
+if "%__SkipRestorePackages%" == 1 goto SkipRestoreProduct
+
+echo %__MsgPrefix%Restoring CoreCLR product from packages
+
+if not defined XunitTestBinBase set XunitTestBinBase=%__TestBinDir%
set "CORE_ROOT=%XunitTestBinBase%\Tests\Core_Root"
set __BuildLogRootName=Restore_Product
set __BuildLog=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.log
set __BuildWrn=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.wrn
set __BuildErr=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.err
-set __msbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
-set __msbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
-set __msbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
+set __MsbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
+set __MsbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
+set __MsbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
+set __Logging=-MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr!
-call "%__ProjectDir%\run.cmd" build -Project=%__ProjectDir%\tests\build.proj -BatchRestorePackages -MsBuildLog=!__msbuildLog! -MsBuildWrn=!__msbuildWrn! -MsBuildErr=!__msbuildErr! %__RunArgs% %__BuildAgainstPackagesArg% %__PriorityArg% %__PassThroughArg% %__unprocessedBuildArgs%
+call "%__ProjectDir%\run.cmd" build -Project=%__ProjectDir%\tests\build.proj -BatchRestorePackages !__Logging! %__RunArgs% %__BuildAgainstPackagesArg% %__PriorityArg% %__PassThroughArg% %__UnprocessedBuildArgs%
if not defined __BuildAgainstPackagesArg goto SkipRestoreProduct
+
+echo %__MsgPrefix%BinPlacing CoreLib
+
set __BuildLogRootName=Tests_GenerateRuntimeLayout
set __BuildLog=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.log
set __BuildWrn=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.wrn
set __BuildErr=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.err
-set __msbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
-set __msbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
-set __msbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
+set __MsbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
+set __MsbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
+set __MsbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
+set __Logging=-MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr!
-call "%__ProjectDir%\run.cmd" build -Project=%__ProjectDir%\tests\runtest.proj -BinPlaceRef -BinPlaceProduct -CopyCrossgenToProduct -RuntimeId="%__RuntimeId%" -MsBuildLog=!__msbuildLog! -MsBuildWrn=!__msbuildWrn! -MsBuildErr=!__msbuildErr! %__RunArgs% %__BuildAgainstPackagesArg% %__PriorityArg% %__PassThroughArg% %__unprocessedBuildArgs%
+call "%__ProjectDir%\run.cmd" build -Project=%__ProjectDir%\tests\runtest.proj -BinPlaceRef -BinPlaceProduct -CopyCrossgenToProduct -RuntimeId="%__RuntimeId%" !__Logging! %__RunArgs% %__BuildAgainstPackagesArg% %__PriorityArg% %__PassThroughArg% %__UnprocessedBuildArgs%
if errorlevel 1 (
- echo BinPlace of mscorlib.dll failed
+ echo %__MsgPrefix%Error: BinPlace of mscorlib.dll failed. Refer to the build log files for details:
+ echo %__BuildLog%
+ echo %__BuildWrn%
+ echo %__BuildErr%
exit /b 1
)
-echo %__MsgPrefix% Restored CoreCLR product from packages
-
:SkipRestoreProduct
-if defined __SkipManaged goto SkipManagedBuild
-
REM =========================================================================================
REM ===
REM === Managed test build section
REM ===
REM =========================================================================================
+if defined __SkipManaged goto SkipManagedBuild
+
echo %__MsgPrefix%Starting the Managed Tests Build
if not defined VSINSTALLDIR (
for /l %%G in (1, 1, %__BuildLoopCount%) do (
- set __msbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%";Append=!__AppendToLog!
- set __msbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%";Append=!__AppendToLog!
- set __msbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%";Append=!__AppendToLog!
+ set __MsbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%";Append=!__AppendToLog!
+ set __MsbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%";Append=!__AppendToLog!
+ set __MsbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%";Append=!__AppendToLog!
set TestBuildSlice=%%G
- call %__DotnetHost% msbuild %__ProjectDir%\tests\build.proj !__msbuildLog! !__msbuildWrn! !__msbuildErr! %__msbuildArgs% %__BuildAgainstPackagesMsbuildArg% %__PriorityMsbuildArg% %__PassThroughArg% %__unprocessedBuildArgs%
+ echo Running: msbuild %__ProjectDir%\tests\build.proj !__MsbuildLog! !__MsbuildWrn! !__MsbuildErr! %TargetsWindowsMsbuildArg% %__msbuildArgs% %__BuildAgainstPackagesMsbuildArg% !__PriorityMsbuildArg! %__UnprocessedBuildArgs%
+
+ call msbuild %__ProjectDir%\tests\build.proj !__MsbuildLog! !__MsbuildWrn! !__MsbuildErr! %TargetsWindowsMsbuildArg% %__msbuildArgs% %__BuildAgainstPackagesMsbuildArg% !__PriorityMsbuildArg! %__UnprocessedBuildArgs%
if errorlevel 1 (
echo %__MsgPrefix%Error: build failed. Refer to the build log files for details:
set __AppendToLog=true
)
+REM Check that we've built about as many tests as we expect. This is primarily intended to prevent accidental changes that cause us to build
+REM drastically fewer Pri-1 tests than expected.
+echo %__MsgPrefix%Check the managed tests build
+echo Running: msbuild %__ProjectDir%\tests\runtest.proj /t:CheckTestBuild /p:CLRTestPriorityToBuild=%__Priority% %__msbuildArgs% %__unprocessedBuildArgs%
+call msbuild %__ProjectDir%\tests\runtest.proj /t:CheckTestBuild /p:CLRTestPriorityToBuild=%__Priority% %__msbuildArgs% %__unprocessedBuildArgs%
+if errorlevel 1 (
+ echo %__MsgPrefix%Error: build failed.
+ exit /b 1
+)
+
:SkipManagedBuild
-REM Prepare the Test Drop
-REM Cleans any NI from the last run
-powershell -NoProfile "Get-ChildItem -path %__TestWorkingDir% -Include '*.ni.*' -Recurse -Force | Remove-Item -force"
-REM Cleans up any lock folder used for synchronization from last run
-powershell -NoProfile "Get-ChildItem -path %__TestWorkingDir% -Include 'lock' -Recurse -Force | where {$_.Attributes -eq 'Directory'}| Remove-Item -force -Recurse"
+
+REM =========================================================================================
+REM ===
+REM === Prepare the test drop
+REM ===
+REM =========================================================================================
+
+echo %__MsgPrefix%Removing 'ni' files and 'lock' folders from %__TestBinDir%
+REM Remove any NI from previous runs.
+powershell -NoProfile "Get-ChildItem -path %__TestBinDir% -Include '*.ni.*' -Recurse -Force | Remove-Item -force"
+REM Remove any lock folder used for synchronization from previous runs.
+powershell -NoProfile "Get-ChildItem -path %__TestBinDir% -Include 'lock' -Recurse -Force | where {$_.Attributes -eq 'Directory'}| Remove-Item -force -Recurse"
set CORE_ROOT=%__TestBinDir%\Tests\Core_Root
set CORE_ROOT_STAGE=%__TestBinDir%\Tests\Core_Root_Stage
md "%CORE_ROOT_STAGE%"
xcopy "%__BinDir%" "%CORE_ROOT_STAGE%"
-
if defined __BuildAgainstPackagesArg (
- if "%__TargetsWindows%"=="0" (
+ if "%__TargetsWindows%"=="0" (
- if not exist %__PackagesDir%\TestNativeBins (
- echo %__MsgPrefix%Error: Ensure you have run sync.cmd -ab before building a non-Windows test overlay against packages
- exit /b 1
- )
+ if not exist %__PackagesDir%\TestNativeBins (
+ echo %__MsgPrefix%Error: Ensure you have run sync.cmd -ab before building a non-Windows test overlay against packages
+ exit /b 1
+ )
- for /R %__PackagesDir%\TestNativeBins\%__RuntimeId%\%__BuildType% %%f in (*.so) do copy %%f %CORE_ROOT_STAGE%
- for /R %__PackagesDir%\TestNativeBins\%__RuntimeId%\%__BuildType% %%f in (*.dylib) do copy %%f %CORE_ROOT_STAGE%
- )
+ for /R %__PackagesDir%\TestNativeBins\%__RuntimeId%\%__BuildType% %%f in (*.so) do copy %%f %CORE_ROOT_STAGE%
+ for /R %__PackagesDir%\TestNativeBins\%__RuntimeId%\%__BuildType% %%f in (*.dylib) do copy %%f %CORE_ROOT_STAGE%
+ )
)
REM =========================================================================================
REM ===
REM =========================================================================================
+echo %__MsgPrefix%Creating test overlay
+
set RuntimeIdArg=
if defined __RuntimeId (
set RuntimeIdArg=-RuntimeID="%__RuntimeId%"
)
-set TargetsWindowsArg=
-set TargetsWindowsMsbuildArg=
-if "%__TargetsWindows%"=="1" (
- set TargetsWindowsArg=-TargetsWindows=true
- set TargetsWindowsMsbuildArg=/p:TargetsWindows=true
-) else if "%__TargetsWindows%"=="0" (
- set TargetsWindowsArg=-TargetsWindows=false
- set TargetsWindowsMsbuildArg=/p:TargetsWindows=false
-)
-
-echo %__MsgPrefix%Creating test overlay...
-
set __BuildLogRootName=Tests_Overlay_Managed
set __BuildLog=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.log
set __BuildWrn=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.wrn
set __BuildErr=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.err
-set __msbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
-set __msbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
-set __msbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
+set __MsbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
+set __MsbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
+set __MsbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
+set __Logging=-MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr!
-call %__ProjectDir%\run.cmd build -Project=%__ProjectDir%\tests\runtest.proj -testOverlay -MsBuildLog=!__msbuildLog! -MsBuildWrn=!__msbuildWrn! -MsBuildErr=!__msbuildErr! %__RunArgs% %RuntimeIdArg% %__PriorityArg% %__PassThroughArg% %__unprocessedBuildArgs%
+call %__ProjectDir%\run.cmd build -Project=%__ProjectDir%\tests\runtest.proj -testOverlay !__Logging! %__RunArgs% %RuntimeIdArg% %__PriorityArg% %__PassThroughArg% %__UnprocessedBuildArgs%
if errorlevel 1 (
echo %__MsgPrefix%Error: build failed. Refer to the build log files for details:
echo %__BuildLog%
xcopy /s /y "%CORE_ROOT_STAGE%" "%CORE_ROOT%"
-REM Create the test host necessary for running CoreFX tests
-REM The test host includes a dotnet executable, system libraries and CoreCLR assemblies found in CoreRoot
+REM =========================================================================================
+REM ===
+REM === Create the test host necessary for running CoreFX tests.
+REM === The test host includes a dotnet executable, system libraries and CoreCLR assemblies found in CORE_ROOT.
+REM ===
+REM =========================================================================================
+
+echo %__MsgPrefix%Building CoreFX test host
set __BuildLogRootName=Tests_CoreFX_Testhost
set __BuildLog=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.log
set __BuildWrn=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.wrn
set __BuildErr=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.err
-set __msbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
-set __msbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
-set __msbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
+set __MsbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
+set __MsbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
+set __MsbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
+set __Logging=-MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr!
-call %__ProjectDir%\run.cmd build -Project=%__ProjectDir%\tests\runtest.proj -testHost -MsBuildLog=!__msbuildLog! -MsBuildWrn=!__msbuildWrn! -MsBuildErr=!__msbuildErr! %__RunArgs% %RuntimeIdArg% %__PriorityArg% %__PassThroughArg% %__unprocessedBuildArgs%
+call %__ProjectDir%\run.cmd build -Project=%__ProjectDir%\tests\runtest.proj -testHost !__Logging! %__RunArgs% %RuntimeIdArg% %__PriorityArg% %__PassThroughArg% %__UnprocessedBuildArgs%
if errorlevel 1 (
echo %__MsgPrefix%Error: build failed. Refer to the build log files for details:
echo %__BuildLog%
exit /b 1
)
+REM =========================================================================================
+REM ===
+REM === Create test wrappers.
+REM ===
+REM =========================================================================================
+
if defined __SkipManaged goto SkipBuildingWrappers
-echo %__MsgPrefix%Creating test wrappers...
+echo %__MsgPrefix%Creating test wrappers
set __BuildLogRootName=Tests_XunitWrapper
set __BuildLog=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.log
set __BuildWrn=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.wrn
set __BuildErr=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.err
-set __msbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
-set __msbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
-set __msbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
+set __MsbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
+set __MsbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
+set __MsbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
+set __Logging=!__MsbuildLog! !__MsbuildWrn! !__MsbuildErr!
REM Build wrappers using the local SDK's msbuild. As we move to arcade, the other builds should be moved away from run.exe as well.
-call %__DotnetHost% msbuild %__ProjectDir%\tests\runtest.proj /p:RestoreAdditionalProjectSources=https://dotnet.myget.org/F/dotnet-core/ /p:BuildWrappers=true !__msbuildLog! !__msbuildWrn! !__msbuildErr! %__msbuildArgs% %TargetsWindowsMsbuildArg% %__BuildAgainstPackagesMsbuildArg% %__unprocessedBuildArgs%
+call %DotNetCli% msbuild %__ProjectDir%\tests\runtest.proj /p:RestoreAdditionalProjectSources=https://dotnet.myget.org/F/dotnet-core/ /p:BuildWrappers=true !__Logging! %__msbuildArgs% %TargetsWindowsMsbuildArg% %__BuildAgainstPackagesMsbuildArg% %__UnprocessedBuildArgs%
if errorlevel 1 (
- echo Xunit Wrapper build failed
+ echo %__MsgPrefix%Error: Xunit wrapper build failed. Refer to the build log files for details:
+ echo %__BuildLog%
+ echo %__BuildWrn%
+ echo %__BuildErr%
exit /b 1
)
+
+echo { "build_os": "%__BuildOS%", "build_arch": "%__BuildArch%", "build_type": "%__BuildType%" } > "%__TestBinDir%/build_info.json"
+
:SkipBuildingWrappers
+REM =========================================================================================
+REM ===
+REM === Crossgen assemblies if needed.
+REM ===
+REM =========================================================================================
+
set __CrossgenArg = ""
if defined __DoCrossgen (
- set __CrossgenArg="-Crossgen"
- if "%__TargetsWindows%" == "1" (
- call :PrecompileFX
- ) else (
- echo "%__MsgPrefix% Crossgen only supported on Windows, for now"
- )
+ set __CrossgenArg="-Crossgen"
+ if "%__TargetsWindows%" == "1" (
+ echo %__MsgPrefix%Running crossgen on framework assemblies
+ call :PrecompileFX
+ ) else (
+ echo "%__MsgPrefix%Crossgen only supported on Windows, for now"
+ )
)
rd /s /q "%CORE_ROOT_STAGE%"
+REM =========================================================================================
+REM ===
+REM === Prep test binaries for Helix publishing
+REM ===
+REM =========================================================================================
+
if not defined __ZipTests goto SkipPrepForPublish
+echo %__MsgPrefix%Preparing test binaries for Helix publishing
+
set __BuildLogRootName=Helix_Prep
set __BuildLog=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.log
set __BuildWrn=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.wrn
set __BuildErr=%__LogsDir%\%__BuildLogRootName%_%__BuildOS%__%__BuildArch%__%__BuildType%.err
-set __msbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
-set __msbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
-set __msbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
+set __MsbuildLog=/flp:Verbosity=normal;LogFile="%__BuildLog%"
+set __MsbuildWrn=/flp1:WarningsOnly;LogFile="%__BuildWrn%"
+set __MsbuildErr=/flp2:ErrorsOnly;LogFile="%__BuildErr%"
+set __Logging=-MsBuildLog=!__MsbuildLog! -MsBuildWrn=!__MsbuildWrn! -MsBuildErr=!__MsbuildErr!
-REM =========================================================================================
-REM ===
-REM === Prep test binaries for Helix publishing
-REM ===
-REM =========================================================================================
-
-call %__ProjectDir%\run.cmd build -Project=%__ProjectDir%\tests\helixprep.proj -MsBuildLog=!__msbuildLog! -MsBuildWrn=!__msbuildWrn! -MsBuildErr=!__msbuildErr! %__RunArgs% %__BuildAgainstPackagesArg% %RuntimeIdArg% %TargetsWindowsArg% %__CrossgenArg% %__PriorityArg% %__PassThroughArg% %__unprocessedBuildArgs%
+call %__ProjectDir%\run.cmd build -Project=%__ProjectDir%\tests\helixprep.proj !__Logging! %__RunArgs% %RuntimeIdArg% %TargetsWindowsArg% %__CrossgenArg% %__PriorityArg% %__PassThroughArg% %__UnprocessedBuildArgs%
if errorlevel 1 (
echo %__MsgPrefix%Error: build failed. Refer to the build log files for details:
echo %__BuildLog%
exit /b 1
)
-echo %__MsgPrefix% Prepped test binaries for publishing
-
:SkipPrepForPublish
REM =========================================================================================
REM ===
REM =========================================================================================
-echo %__MsgPrefix%Test build successful.
+echo %__MsgPrefix%Test build succeeded. Finished at %TIME%
echo %__MsgPrefix%Test binaries are available at !__TestBinDir!
exit /b 0
echo %0 [option1] [option2] ...
echo All arguments are optional. Options are case-insensitive. The options are:
echo.
-echo. -? -h -help: view this message.
+echo.-? -h -help --help: view this message.
echo Build architecture: one of x64, x86, arm, arm64 ^(default: x64^).
echo Build type: one of Debug, Checked, Release ^(default: Debug^).
echo skipmanaged: skip the managed tests build
echo Exclude- Optional parameter - specify location of default exclusion file ^(defaults to tests\issues.targets if not specified^)
echo Set to "" to disable default exclusion file.
echo -- ... : all arguments following this tag will be passed directly to msbuild.
-echo -priority=^<N^> : specify a set of test that will be built and run, with priority N.
+echo -priority=^<N^> : specify a set of tests that will be built and run, with priority N.
echo 0: Build only priority 0 cases as essential testcases (default)
echo 1: Build all tests with priority 0 and 1
echo 666: Build all tests with priority 0, 1 ... 666
This is due to a bug in the Visual Studio installer. It does not install DIA SDK at "%VSINSTALLDIR%" but rather ^
at the install location of previous Visual Studio version. The workaround is to copy the DIA SDK folder from the Visual Studio install location ^
of the previous version to "%VSINSTALLDIR%" and then build.
-:: DIA SDK not included in Express editions
+REM DIA SDK not included in Express editions
echo Visual Studio Express does not include the DIA SDK. ^
You need Visual Studio 2015 or 2017 (Community is free).
echo See: https://github.com/dotnet/coreclr/blob/master/Documentation/project-docs/developer-guide.md#prerequisites
exit /b 0
)
-:: Delete original .dll & replace it with the Crossgened .dll
+REM Delete original .dll & replace it with the Crossgened .dll
del %1
ren "%CORE_ROOT%\temp.ni.dll" %2