+// SPDX-License-Identifier: GPL-2.0
/*
* (C) Copyright 2018 Xilinx, Inc.
* Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
- *
- * SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
+#include <env.h>
#include <malloc.h>
+#include <zynqmp_firmware.h>
+#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
-static int zynqmp_verify_secure(u8 *key_ptr, u8 *src_ptr, u32 len)
+static int do_zynqmp_verify_secure(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
+ u64 src_addr, addr;
+ u32 len, src_lo, src_hi;
+ u8 *key_ptr = NULL;
int ret;
- u32 src_lo, src_hi;
u32 key_lo = 0;
u32 key_hi = 0;
u32 ret_payload[PAYLOAD_ARG_CNT];
- u64 addr;
- if ((ulong)src_ptr != ALIGN((ulong)src_ptr,
- CONFIG_SYS_CACHELINE_SIZE)) {
- printf("Failed: source address not aligned:%p\n", src_ptr);
+ if (argc < 4)
+ return CMD_RET_USAGE;
+
+ src_addr = simple_strtoull(argv[2], NULL, 16);
+ len = simple_strtoul(argv[3], NULL, 16);
+
+ if (argc == 5)
+ key_ptr = (uint8_t *)(uintptr_t)simple_strtoull(argv[4],
+ NULL, 16);
+
+ if ((ulong)src_addr != ALIGN((ulong)src_addr,
+ CONFIG_SYS_CACHELINE_SIZE)) {
+ printf("Failed: source address not aligned:%lx\n",
+ (ulong)src_addr);
return -EINVAL;
}
- src_lo = lower_32_bits((ulong)src_ptr);
- src_hi = upper_32_bits((ulong)src_ptr);
- flush_dcache_range((ulong)src_ptr, (ulong)(src_ptr + len));
+ src_lo = lower_32_bits((ulong)src_addr);
+ src_hi = upper_32_bits((ulong)src_addr);
+ flush_dcache_range((ulong)src_addr, (ulong)(src_addr + len));
if (key_ptr) {
key_lo = lower_32_bits((ulong)key_ptr);
return ret;
}
+static int do_zynqmp_mmio_read(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ u32 read_val, addr;
+ int ret;
+
+ if (argc != cmdtp->maxargs)
+ return CMD_RET_USAGE;
+
+ addr = simple_strtoul(argv[2], NULL, 16);
+
+ ret = zynqmp_mmio_read(addr, &read_val);
+ if (!ret)
+ printf("mmio read value at 0x%x = 0x%x\n",
+ addr, read_val);
+ else
+ printf("Failed: mmio read\n");
+
+ return ret;
+}
+
+static int do_zynqmp_mmio_write(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ u32 addr, mask, val;
+ int ret;
+
+ if (argc != cmdtp->maxargs)
+ return CMD_RET_USAGE;
+
+ addr = simple_strtoul(argv[2], NULL, 16);
+ mask = simple_strtoul(argv[3], NULL, 16);
+ val = simple_strtoul(argv[4], NULL, 16);
+
+ ret = zynqmp_mmio_write(addr, mask, val);
+ if (ret != 0)
+ printf("Failed: mmio write\n");
+
+ return ret;
+}
+
+#ifdef CONFIG_DEFINE_TCM_OCM_MMAP
+static int do_zynqmp_tcm_init(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ u8 mode;
+
+ if (argc != cmdtp->maxargs)
+ return CMD_RET_USAGE;
+
+ mode = simple_strtoul(argv[2], NULL, 16);
+ if (mode != TCM_LOCK && mode != TCM_SPLIT) {
+ printf("Mode should be either 0(lock)/1(split)\n");
+ return CMD_RET_FAILURE;
+ }
+
+ dcache_disable();
+ tcm_init(mode);
+ dcache_enable();
+
+ return CMD_RET_SUCCESS;
+}
+#endif
+
+static cmd_tbl_t cmd_zynqmp_sub[] = {
+ U_BOOT_CMD_MKENT(secure, 5, 0, do_zynqmp_verify_secure, "", ""),
+ U_BOOT_CMD_MKENT(mmio_read, 3, 0, do_zynqmp_mmio_read, "", ""),
+ U_BOOT_CMD_MKENT(mmio_write, 5, 0, do_zynqmp_mmio_write, "", ""),
+#ifdef CONFIG_DEFINE_TCM_OCM_MMAP
+ U_BOOT_CMD_MKENT(tcminit, 3, 0, do_zynqmp_tcm_init, "", ""),
+#endif
+};
+
/**
* do_zynqmp - Handle the "zynqmp" command-line command
* @cmdtp: Command data struct pointer
static int do_zynqmp(cmd_tbl_t *cmdtp, int flag, int argc,
char *const argv[])
{
- u64 src_addr;
- u32 len;
- u8 *key_ptr = NULL;
- u8 *src_ptr;
- int ret;
+ cmd_tbl_t *c;
- if (argc > 5 || argc < 4 || strncmp(argv[1], "secure", 6))
+ if (argc < 2)
return CMD_RET_USAGE;
- src_addr = simple_strtoull(argv[2], NULL, 16);
-
- len = simple_strtoul(argv[3], NULL, 16);
-
- if (argc > 4)
- key_ptr = (uint8_t *)(uintptr_t)simple_strtoull(argv[4],
- NULL, 16);
-
- src_ptr = (uint8_t *)(uintptr_t)src_addr;
-
- ret = zynqmp_verify_secure(key_ptr, src_ptr, len);
- if (ret)
- return CMD_RET_FAILURE;
+ c = find_cmd_tbl(argv[1], &cmd_zynqmp_sub[0],
+ ARRAY_SIZE(cmd_zynqmp_sub));
- return CMD_RET_SUCCESS;
+ if (c)
+ return c->cmd(c, flag, argc, argv);
+ else
+ return CMD_RET_USAGE;
}
/***************************************************/
"secure src len [key_addr] - verifies secure images of $len bytes\n"
" long at address $src. Optional key_addr\n"
" can be specified if user key needs to\n"
- " be used for decryption\n";
+ " be used for decryption\n"
+ "zynqmp mmio_read address - read from address\n"
+ "zynqmp mmio_write address mask value - write value after masking to\n"
+ " address\n"
+#ifdef CONFIG_DEFINE_TCM_OCM_MMAP
+ "zynqmp tcminit mode - Initialize the TCM with zeros. TCM needs to be\n"
+ " initialized before accessing to avoid ECC\n"
+ " errors. mode specifies in which mode TCM has\n"
+ " to be initialized. Supported modes will be\n"
+ " lock(0)/split(1)\n"
+#endif
+ ;
#endif
U_BOOT_CMD(
zynqmp, 5, 1, do_zynqmp,
- "Verify and load secure images",
+ "ZynqMP sub-system",
zynqmp_help_text
)
projects / platform / kernel / u-boot.git / blobdiff