-/******************************************************************************
- *
- * This source code has been made available to you by IBM on an AS-IS
- * basis. Anyone receiving this source is licensed under IBM
- * copyrights to use it in any way he or she deems fit, including
- * copying it, modifying it, compiling it, and redistributing it either
- * with or without modifications. No license under IBM patents or
- * patent applications is to be implied by the copyright license.
- *
- * Any user of this software should understand that IBM cannot provide
- * technical support for this software and will not be responsible for
- * any consequences resulting from the use of this software.
- *
- * Any person who transfers this source code or any derivative work
- * must include the IBM copyright notice, this paragraph, and the
- * preceding two paragraphs in the transferred software.
- *
- * COPYRIGHT I B M CORPORATION 1995
- * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- *
- *****************************************************************************/
+/*
+ * SPDX-License-Identifier: GPL-2.0 IBM-pibs
+ */
#include <config.h>
-#include <ppc4xx.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+#include <asm/ppc4xx.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
mflr r3 /* get address of ..getAddr */
/* Calculate number of cache lines for this function */
- addi r4, 0, (((.Lfe0 - ..getAddr) / CFG_CACHELINE_SIZE) + 2)
+ addi r4, 0, (((.Lfe0 - ..getAddr) / CONFIG_SYS_CACHELINE_SIZE) + 2)
mtctr r4
..ebcloop:
icbt r0, r3 /* prefetch cache line for addr in r3*/
- addi r3, r3, CFG_CACHELINE_SIZE /* move to next cache line */
+ addi r3, r3, CONFIG_SYS_CACHELINE_SIZE /* move to next cache line */
bdnz ..ebcloop /* continue for $CTR cache lines */
/********************************************************************
/********************************************************************
* Setup External Bus Controller (EBC).
*******************************************************************/
- addi r3, 0, epcr
- mtdcr ebccfga, r3
+ addi r3, 0, EBC0_CFG
+ mtdcr EBC0_CFGADDR, r3
addis r4, 0, 0xb040 /* Device base timeout = 1024 cycles */
ori r4, r4, 0x0 /* Drive CS with external master */
- mtdcr ebccfgd, r4
+ mtdcr EBC0_CFGDATA, r4
/********************************************************************
* Change PCIINT signal to PerWE
*******************************************************************/
- mfdcr r4, cntrl1
+ mfdcr r4, CPC0_CR1
ori r4, r4, 0x4000
- mtdcr cntrl1, r4
+ mtdcr CPC0_CR1, r4
/********************************************************************
* Memory Bank 0 (Flash Bank 0) initialization
*******************************************************************/
- addi r3, 0, pb0ap
- mtdcr ebccfga, r3
- addis r4, 0, CFG_W7O_EBC_PB0AP@h
- ori r4, r4, CFG_W7O_EBC_PB0AP@l
- mtdcr ebccfgd, r4
-
- addi r3, 0, pb0cr
- mtdcr ebccfga, r3
- addis r4, 0, CFG_W7O_EBC_PB0CR@h
- ori r4, r4, CFG_W7O_EBC_PB0CR@l
- mtdcr ebccfgd, r4
+ addi r3, 0, PB1AP
+ mtdcr EBC0_CFGADDR, r3
+ addis r4, 0, CONFIG_SYS_W7O_EBC_PB0AP@h
+ ori r4, r4, CONFIG_SYS_W7O_EBC_PB0AP@l
+ mtdcr EBC0_CFGDATA, r4
+
+ addi r3, 0, PB0CR
+ mtdcr EBC0_CFGADDR, r3
+ addis r4, 0, CONFIG_SYS_W7O_EBC_PB0CR@h
+ ori r4, r4, CONFIG_SYS_W7O_EBC_PB0CR@l
+ mtdcr EBC0_CFGDATA, r4
/********************************************************************
* Memory Bank 7 LEDs - NEEDED BECAUSE OF HW WATCHDOG AND LEDs.
*******************************************************************/
- addi r3, 0, pb7ap
- mtdcr ebccfga, r3
- addis r4, 0, CFG_W7O_EBC_PB7AP@h
- ori r4, r4, CFG_W7O_EBC_PB7AP@l
- mtdcr ebccfgd, r4
-
- addi r3, 0, pb7cr
- mtdcr ebccfga, r3
- addis r4, 0, CFG_W7O_EBC_PB7CR@h
- ori r4, r4, CFG_W7O_EBC_PB7CR@l
- mtdcr ebccfgd, r4
+ addi r3, 0, PB7AP
+ mtdcr EBC0_CFGADDR, r3
+ addis r4, 0, CONFIG_SYS_W7O_EBC_PB7AP@h
+ ori r4, r4, CONFIG_SYS_W7O_EBC_PB7AP@l
+ mtdcr EBC0_CFGDATA, r4
+
+ addi r3, 0, PB7CR
+ mtdcr EBC0_CFGADDR, r3
+ addis r4, 0, CONFIG_SYS_W7O_EBC_PB7CR@h
+ ori r4, r4, CONFIG_SYS_W7O_EBC_PB7CR@l
+ mtdcr EBC0_CFGDATA, r4
/* We are all done */
mtlr r0 /* Restore link register */
* contents of the SPD EEPROM. If the SPD EEPROM is blank or
* erronious, spd_sdram returns 0 in R3.
*/
+ li r3,0
bl spd_sdram
addic. r3, r3, 0 /* Check for error, save dram size */
bne ..sdri_done /* If it worked, we're done... */
* Disable memory controller to allow
* values to be changed.
*/
- addi r3, 0, mem_mcopt1
- mtdcr memcfga, r3
+ addi r3, 0, SDRAM0_CFG
+ mtdcr SDRAM0_CFGADDR, r3
addis r4, 0, 0x0
ori r4, r4, 0x0
- mtdcr memcfgd, r4
+ mtdcr SDRAM0_CFGDATA, r4
/*
* Set MB0CF for ext bank 0. (0-4MB) Address Mode 5 since 11x8x2
* All other banks are disabled.
*/
- addi r3, 0, mem_mb0cf
- mtdcr memcfga, r3
+ addi r3, 0, SDRAM0_B0CR
+ mtdcr SDRAM0_CFGADDR, r3
addis r4, 0, 0x0000 /* BA=0x0, SZ=4MB */
ori r4, r4, 0x8001 /* Mode is 5, 11x8x2or4, BE=Enabled */
- mtdcr memcfgd, r4
+ mtdcr SDRAM0_CFGDATA, r4
/* Clear MB1CR,MB2CR,MB3CR to turn other banks off */
addi r4, 0, 0 /* Zero the data reg */
addi r3, r3, 4 /* Point to MB1CF reg */
- mtdcr memcfga, r3 /* Set the address */
- mtdcr memcfgd, r4 /* Zero the reg */
+ mtdcr SDRAM0_CFGADDR, r3 /* Set the address */
+ mtdcr SDRAM0_CFGDATA, r4 /* Zero the reg */
addi r3, r3, 4 /* Point to MB2CF reg */
- mtdcr memcfga, r3 /* Set the address */
- mtdcr memcfgd, r4 /* Zero the reg */
+ mtdcr SDRAM0_CFGADDR, r3 /* Set the address */
+ mtdcr SDRAM0_CFGDATA, r4 /* Zero the reg */
addi r3, r3, 4 /* Point to MB3CF reg */
- mtdcr memcfga, r3 /* Set the address */
- mtdcr memcfgd, r4 /* Zero the reg */
+ mtdcr SDRAM0_CFGADDR, r3 /* Set the address */
+ mtdcr SDRAM0_CFGDATA, r4 /* Zero the reg */
/********************************************************************
* Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR.
/*
* Set up SDTR1
*/
- addi r3, 0, mem_sdtr1
- mtdcr memcfga, r3
+ addi r3, 0, SDRAM0_TR
+ mtdcr SDRAM0_CFGADDR, r3
addis r4, 0, 0x0086 /* SDTR1 value for 100Mhz */
ori r4, r4, 0x400D
- mtdcr memcfgd, r4
+ mtdcr SDRAM0_CFGDATA, r4
/*
* Set RTR
*/
- addi r3, 0, mem_rtr
- mtdcr memcfga, r3
+ addi r3, 0, SDRAM0_RTR
+ mtdcr SDRAM0_CFGADDR, r3
addis r4, 0, 0x05F0 /* RTR refresh val = 15.625ms@100Mhz */
- mtdcr memcfgd, r4
+ mtdcr SDRAM0_CFGDATA, r4
/********************************************************************
* Delay to ensure 200usec have elapsed since reset. Assume worst
/********************************************************************
* Set memory controller options reg, MCOPT1.
*******************************************************************/
- addi r3, 0, mem_mcopt1
- mtdcr memcfga, r3
+ addi r3, 0, SDRAM0_CFG
+ mtdcr SDRAM0_CFGADDR, r3
addis r4, 0, 0x80E0 /* DC_EN=1,SRE=0,PME=0,MEMCHK=0 */
ori r4, r4, 0x0000 /* REGEN=0,DRW=00,BRPF=01,ECCDD=1 */
- mtdcr memcfgd, r4 /* EMDULR=1 */
+ mtdcr SDRAM0_CFGDATA, r4 /* EMDULR=1 */
..sdri_done:
/* restore and return */
blr /* Return to calling function */
.Lfe1: .size sdram_init,.Lfe1-sdram_init
/* end sdram_init() */
-