/*
- * (C) Copyright 2003-2004
+ * (C) Copyright 2003-2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2004
* Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
*
- * (C) Copyright 2004-2005
+ * (C) Copyright 2004-2006
* Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
*
* See file CREDITS for list of people who contributed to this
#include <common.h>
#include <mpc5xxx.h>
#include <pci.h>
+#include <asm/processor.h>
#ifdef CONFIG_VIDEO_SM501
#include <sm501.h>
{
ulong dramsize = 0;
ulong dramsize2 = 0;
+ uint svr, pvr;
+
#ifndef CFG_RAMBOOT
ulong test1, test2;
/* find RAM size using SDRAM CS0 only */
sdram_start(0);
- test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
+ test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
sdram_start(1);
- test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
+ test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
/* find RAM size using SDRAM CS1 only */
sdram_start(0);
- test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
+ test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
sdram_start(1);
- test2 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
+ test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
if (test1 > test2) {
sdram_start(0);
dramsize2 = test1;
} else {
dramsize2 = 0;
}
-
#endif /* CFG_RAMBOOT */
-/* return dramsize + dramsize2; */
+ /*
+ * On MPC5200B we need to set the special configuration delay in the
+ * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
+ * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
+ *
+ * "The SDelay should be written to a value of 0x00000004. It is
+ * required to account for changes caused by normal wafer processing
+ * parameters."
+ */
+ svr = get_svr();
+ pvr = get_pvr();
+ if ((SVR_MJREV(svr) >= 2) &&
+ (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
+
+ *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+ __asm__ volatile ("sync");
+ }
+
+#if defined(CONFIG_TQM5200_B)
+ return dramsize + dramsize2;
+#else
return dramsize;
+#endif /* CONFIG_TQM5200_B */
}
#elif defined(CONFIG_MGT5100)
int checkboard (void)
{
-#if defined (CONFIG_TQM5200_AA)
- puts ("Board: TQM5200-AA (TQ-Components GmbH)\n");
-#elif defined (CONFIG_TQM5200_AB)
- puts ("Board: TQM5200-AB (TQ-Components GmbH)\n");
-#elif defined (CONFIG_TQM5200_AC)
- puts ("Board: TQM5200-AC (TQ-Components GmbH)\n");
-#elif defined (CONFIG_TQM5200)
- puts ("Board: TQM5200 (TQ-Components GmbH)\n");
+#if defined(CONFIG_AEVFIFO)
+ puts ("Board: AEVFIFO\n");
+ return 0;
#endif
-#if defined (CONFIG_STK52XX)
- puts (" on a STK52XX baseboard\n");
+
+#if defined(CONFIG_TQM5200S)
+# define MODULE_NAME "TQM5200S"
+#else
+# define MODULE_NAME "TQM5200"
+#endif
+
+#if defined(CONFIG_STK52XX)
+# define CARRIER_NAME "STK52xx"
+#elif defined(CONFIG_TB5200)
+# define CARRIER_NAME "TB5200"
+#elif defined(CONFIG_CAM5200)
+# define CARRIER_NAME "Cam5200"
+#elif defined(CONFIG_FO300)
+# define CARRIER_NAME "FO300"
+#else
+# error "UNKNOWN"
#endif
+ puts ( "Board: " MODULE_NAME " (TQ-Components GmbH)\n"
+ " on a " CARRIER_NAME " carrier board\n");
+
return 0;
}
+#undef MODULE_NAME
+#undef CARRIER_NAME
+
void flash_preinit(void)
{
/*
#endif
#endif /* CONFIG_PS2MULT */
-#if defined(CONFIG_CS_AUTOCONF)
int last_stage_init (void)
{
/*
* Check for SRAM and SRAM size
*/
- /* save origianl SRAM content */
+ /* save original SRAM content */
save = *(volatile u16 *)CFG_CS2_START;
restore = 1;
*(vu_long *)MPC5XXX_CS2_STOP = 0x0000FFFF;
restore = 0;
__asm__ volatile ("sync");
- }
- else if (*(volatile u16 *)(CFG_CS2_START + (1<<19)) == 0xA5A5) {
+ } else if (*(volatile u16 *)(CFG_CS2_START + (1<<19)) == 0xA5A5) {
/* make sure that we access a mirrored address */
*(volatile u16 *)CFG_CS2_START = 0x1111;
__asm__ volatile ("sync");
}
else
puts ("!! possible error in SRAM detection\n");
- }
- else {
+ } else {
puts ("SRAM: 1 MB\n");
}
/* restore origianl SRAM content */
*(vu_long *)MPC5XXX_CS1_STOP = 0x0000FFFF;
restore = 0;
__asm__ volatile ("sync");
- }
- else {
+ } else {
puts ("VGA: SMI501 (Voyager) with 8 MB\n");
}
/* restore origianl FB content */
return 0;
}
-#endif /* CONFIG_CS_AUTOCONF */
#ifdef CONFIG_VIDEO_SM501
+#ifdef CONFIG_FO300
+#define DISPLAY_WIDTH 800
+#else
#define DISPLAY_WIDTH 640
+#endif
#define DISPLAY_HEIGHT 480
#ifdef CONFIG_VIDEO_SM501_8BPP
{0x80218, 0x000201e9},
{0x80200, 0x00013306},
#else /* panel + CRT */
+#ifdef CONFIG_FO300
+ {0x00004, 0x0},
+ {0x00048, 0x00021807},
+ {0x0004C, 0x301a0a01},
+ {0x00054, 0x1},
+ {0x00040, 0x00021807},
+ {0x00044, 0x091a0a01},
+ {0x00054, 0x0},
+ {0x80000, 0x0f013106},
+ {0x80004, 0xc428bb17},
+ {0x8000C, 0x00000000},
+ {0x80010, 0x0C800C80},
+ {0x80014, 0x03200000},
+ {0x80018, 0x01e00000},
+ {0x8001C, 0x00000000},
+ {0x80020, 0x01e00320},
+ {0x80024, 0x042a031f},
+ {0x80028, 0x0086034a},
+ {0x8002C, 0x020c01df},
+ {0x80030, 0x000201ea},
+ {0x80200, 0x00010000},
+#else
{0x00004, 0x0},
{0x00048, 0x00021807},
{0x0004C, 0x091a0a01},
{0x8002C, 0x020c01df},
{0x80030, 0x000201e9},
{0x80200, 0x00010000},
+#endif /* #ifdef CONFIG_FO300 */
#endif
{0, 0}
};
void video_get_info_str (int line_number, char *info)
{
if (line_number == 1) {
-#if defined (CONFIG_TQM5200_AA)
- strcpy (info, " Board: TQM5200-AA (TQ-Components GmbH)");
-#elif defined (CONFIG_TQM5200_AB)
- strcpy (info, " Board: TQM5200-AB (TQ-Components GmbH)");
-#elif defined (CONFIG_TQM5200_AC)
- strcpy (info, " Board: TQM5200-AC (TQ-Components GmbH)");
-#elif defined (CONFIG_TQM5200)
- strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
-#else
-#error No supported board selected
-#endif
-#if defined (CONFIG_STK52XX)
+ strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
+#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200) || defined(CONFIG_FO300)
} else if (line_number == 2) {
- strcpy (info, " on a STK52XX baseboard");
+#if defined (CONFIG_STK52XX)
+ strcpy (info, " on a STK52xx carrier board");
+#endif
+#if defined (CONFIG_TB5200)
+ strcpy (info, " on a TB5200 carrier board");
+#endif
+#if defined (CONFIG_FO300)
+ strcpy (info, " on a FO300 carrier board");
+#endif
#endif
}
else {
#endif
/*
- * Returns SM501 register base address. First thing called in the driver.
+ * Returns SM501 register base address. First thing called in the
+ * driver. Checks if SM501 is physically present.
*/
unsigned int board_video_init (void)
{
- return SM501_MMIO_BASE;
+ u16 save, tmp;
+ int restore, ret;
+
+ /*
+ * Check for Grafic Controller
+ */
+
+ /* save origianl FB content */
+ save = *(volatile u16 *)CFG_CS1_START;
+ restore = 1;
+
+ /* write test pattern to FB memory */
+ *(volatile u16 *)CFG_CS1_START = 0xA5A5;
+ __asm__ volatile ("sync");
+ /*
+ * Put a different pattern on the data lines: otherwise they may float
+ * long enough to read back what we wrote.
+ */
+ tmp = *(volatile u16 *)CFG_FLASH_BASE;
+ if (tmp == 0xA5A5)
+ puts ("!! possible error in grafic controller detection\n");
+
+ if (*(volatile u16 *)CFG_CS1_START != 0xA5A5) {
+ /* no grafic controller found */
+ restore = 0;
+ ret = 0;
+ } else {
+ ret = SM501_MMIO_BASE;
+ }
+
+ if (restore) {
+ *(volatile u16 *)CFG_CS1_START = save;
+ __asm__ volatile ("sync");
+ }
+ return ret;
}
/*
}
#endif /* CONFIG_VIDEO_SM501 */
+
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+#ifdef CONFIG_FO300
+int board_early_init_f (void)
+{
+ vu_long timer3_status;
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* Configure GPT3 as GPIO input */
+ *(vu_long *)MPC5XXX_GPT3_ENABLE = 0x00000004;
+
+ /* Read in TIMER_3 pin status */
+ timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS;
+
+#ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED
+ /* Force silent console mode if S1 switch
+ * is in closed position (TIMER_3 pin status is LOW). */
+ if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 0)
+#else
+ /* Force silent console mode if S1 switch
+ * is in open position (TIMER_3 pin status is HIGH). */
+ if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 1)
+#endif
+ gd->flags |= GD_FLG_SILENT;
+
+ return 0;
+}
+#endif
+#endif