imx: reorganize IMX code as other SOCs

[platform/kernel/u-boot.git] / board / tqc / tqma6 / tqma6_mba6.c

diff --git a/board/tqc/tqma6/tqma6_mba6.c b/board/tqc/tqma6/tqma6_mba6.c
index 6d63953..1188215 100644 (file)
--- a/board/tqc/tqma6/tqma6_mba6.c
+++ b/board/tqc/tqma6/tqma6_mba6.c
@@ -16,7 +16,7 @@
 #include <asm/arch/sys_proto.h>
 #include <linux/errno.h>
 #include <asm/gpio.h>
-#include <asm/imx-common/mxc_i2c.h>
+#include <asm/mach-imx/mxc_i2c.h>
 
 #include <common.h>
 #include <fsl_esdhc.h>
@@ -54,19 +54,19 @@ DECLARE_GLOBAL_DATA_PTR;
        PAD_CTL_DSE_80ohm | PAD_CTL_HYS |                       \
        PAD_CTL_ODE | PAD_CTL_SRE_FAST)
 
-#if defined(CONFIG_MX6Q)
+#if defined(CONFIG_TQMA6Q)
 
 #define IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII   0x02e0790
 #define IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM       0x02e07ac
 
-#elif defined(CONFIG_MX6S)
+#elif defined(CONFIG_TQMA6S) || defined(CONFIG_TQMA6DL)
 
 #define IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII   0x02e0768
 #define IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM       0x02e0788
 
 #else
 
-#error "need to define target CPU"
+#error "need to select module"
 
 #endif
 
@@ -114,6 +114,11 @@ static iomux_v3_cfg_t const mba6_enet_pads[] = {
 
 static void mba6_setup_iomuxc_enet(void)
 {
+       struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+       /* clear gpr1[ENET_CLK_SEL] for externel clock */
+       clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
+
        __raw_writel(IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM_DISABLE,
                     (void *)IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM);
        __raw_writel(IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII_1P5V,
@@ -238,14 +243,16 @@ int board_phy_config(struct phy_device *phydev)
 {
 /*
  * optimized pad skew values depends on CPU variant on the TQMa6x module:
- * i.MX6Q/D or i.MX6DL/S
+ * CONFIG_TQMA6Q: i.MX6Q/D
+ * CONFIG_TQMA6S: i.MX6S
+ * CONFIG_TQMA6DL: i.MX6DL
  */
-#if defined(CONFIG_MX6Q) || defined(CONFIG_MX6Q)
+#if defined(CONFIG_TQMA6Q)
 #define MBA6X_KSZ9031_CTRL_SKEW        0x0032
 #define MBA6X_KSZ9031_CLK_SKEW 0x03ff
 #define MBA6X_KSZ9031_RX_SKEW  0x3333
 #define MBA6X_KSZ9031_TX_SKEW  0x2036
-#elif defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+#elif defined(CONFIG_TQMA6S) || defined(CONFIG_TQMA6DL)
 #define MBA6X_KSZ9031_CTRL_SKEW        0x0030
 #define MBA6X_KSZ9031_CLK_SKEW 0x03ff
 #define MBA6X_KSZ9031_RX_SKEW  0x3333