+// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2010
* Texas Instruments Incorporated, <www.ti.com>
* Steve Sakoman <steve@sakoman.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <init.h>
+#include <log.h>
+#include <net.h>
+#include <serial.h>
+#include <asm/global_data.h>
#include <asm/mach-types.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/gpio.h>
+#include <env.h>
#include <twl6030.h>
#include "panda_mux_data.h"
-#ifdef CONFIG_USB_EHCI_HCD
-#include <usb.h>
-#include <asm/arch/ehci.h>
-#include <asm/ehci-omap.h>
-#endif
-
#define PANDA_ULPI_PHY_TYPE_GPIO 182
#define PANDA_BOARD_ID_1_GPIO 101
#define PANDA_ES_BOARD_ID_1_GPIO 48
return 0;
}
-int board_eth_init(bd_t *bis)
+#if defined(CONFIG_SPL_OS_BOOT)
+int spl_start_uboot(void)
+{
+ /* break into full u-boot on 'c' */
+ if (serial_tstc() && serial_getc() == 'c')
+ return 1;
+
+ return 0;
+}
+#endif /* CONFIG_SPL_OS_BOOT */
+
+int board_eth_init(struct bd_info *bis)
{
return 0;
}
}
#if defined(CONFIG_MMC)
-int board_mmc_init(bd_t *bis)
+int board_mmc_init(struct bd_info *bis)
{
return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
#endif
-#ifdef CONFIG_USB_EHCI_HCD
-
-static struct omap_usbhs_board_data usbhs_bdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- int ret;
- unsigned int utmi_clk;
-
- /* Now we can enable our port clocks */
- utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL);
- utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK;
- setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk);
-
- ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-int ehci_hcd_stop(int index)
-{
- return omap_ehci_hcd_stop();
-}
-#endif
-
+#ifdef CONFIG_REVISION_TAG
/*
* get_board_rev() - get board revision
*/
{
return 0x20;
}
+#endif