* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <asm/mach-types.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/gpio.h>
+#include <twl6030.h>
#include "panda_mux_data.h"
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
#include <usb.h>
#include <asm/arch/ehci.h>
#include <asm/ehci-omap.h>
board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO);
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- setenv("board_name", strcat(CONFIG_SYS_BOARD, "-es"));
+ setenv("board_name", "panda-es");
#endif
board_id = ((board_id4 << 4) | (board_id3 << 3) |
(board_id2 << 2) | (board_id1 << 1) | (board_id0));
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3))
- setenv("board_name", strcat(CONFIG_SYS_BOARD, "-a4"));
+ setenv("board_name", "panda-a4");
#endif
}
else
*regs = &emif_regs_elpida_400_mhz_1cs;
}
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs
+ **dmm_lisa_regs)
+{
+ u32 omap_rev = omap_revision();
+
+ if (omap_rev == OMAP4430_ES1_0)
+ *dmm_lisa_regs = &lisa_map_2G_x_1_x_2;
+ else if (omap_rev == OMAP4430_ES2_3)
+ *dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
+ else if (omap_rev < OMAP4460_ES1_0)
+ *dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
+ else
+ *dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2;
+}
+
#endif
/**
{
int phy_type;
u32 auxclk, altclksrc;
- u32 id[4];
/* EHCI is not supported on ES1.0 */
if (omap_revision() == OMAP4430_ES1_0)
writel(altclksrc, &scrm->altclksrc);
- id[0] = readl(STD_FUSE_DIE_ID_0);
- id[1] = readl(STD_FUSE_DIE_ID_1);
- id[2] = readl(STD_FUSE_DIE_ID_2);
- id[3] = readl(STD_FUSE_DIE_ID_3);
- usb_fake_mac_from_die_id(id);
+ omap_die_id_usbethaddr();
return 0;
}
-void set_muxconf_regs_essential(void)
+void set_muxconf_regs(void)
{
do_set_mux((*ctrl)->control_padconf_core_base,
core_padconf_array_essential,
sizeof(struct pad_conf_entry));
}
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+#if defined(CONFIG_MMC)
int board_mmc_init(bd_t *bis)
{
return omap_mmc_init(0, 0, 0, -1, -1);
}
+
+#if !defined(CONFIG_SPL_BUILD)
+void board_mmc_power_init(void)
+{
+ twl6030_power_mmc_init(0);
+}
+#endif
#endif
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,