Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD

[platform/kernel/u-boot.git] / board / ti / panda / panda.c

diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 16368cb..5822366 100644 (file)
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -11,10 +11,11 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/gpio.h>
 #include <asm/gpio.h>
+#include <twl6030.h>
 
 #include "panda_mux_data.h"
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 #include <usb.h>
 #include <asm/arch/ehci.h>
 #include <asm/ehci-omap.h>
@@ -101,7 +102,7 @@ int get_board_revision(void)
                board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO);
 
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-               setenv("board_name", strcat(CONFIG_SYS_BOARD, "-es"));
+               setenv("board_name", "panda-es");
 #endif
                board_id = ((board_id4 << 4) | (board_id3 << 3) |
                        (board_id2 << 2) | (board_id1 << 1) | (board_id0));
@@ -115,7 +116,7 @@ int get_board_revision(void)
 
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
                if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3))
-                       setenv("board_name", strcat(CONFIG_SYS_BOARD, "-a4"));
+                       setenv("board_name", "panda-a4");
 #endif
        }
 
@@ -180,6 +181,22 @@ void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
        else
                *regs = &emif_regs_elpida_400_mhz_1cs;
 }
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs
+                                               **dmm_lisa_regs)
+{
+       u32 omap_rev = omap_revision();
+
+       if (omap_rev == OMAP4430_ES1_0)
+               *dmm_lisa_regs = &lisa_map_2G_x_1_x_2;
+       else if (omap_rev == OMAP4430_ES2_3)
+               *dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
+       else if (omap_rev < OMAP4460_ES1_0)
+               *dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
+       else
+               *dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2;
+}
+
 #endif
 
 /**
@@ -193,7 +210,6 @@ int misc_init_r(void)
 {
        int phy_type;
        u32 auxclk, altclksrc;
-       u32 id[4];
 
        /* EHCI is not supported on ES1.0 */
        if (omap_revision() == OMAP4430_ES1_0)
@@ -247,16 +263,12 @@ int misc_init_r(void)
 
        writel(altclksrc, &scrm->altclksrc);
 
-       id[0] = readl(STD_FUSE_DIE_ID_0);
-       id[1] = readl(STD_FUSE_DIE_ID_1);
-       id[2] = readl(STD_FUSE_DIE_ID_2);
-       id[3] = readl(STD_FUSE_DIE_ID_3);
-       usb_fake_mac_from_die_id(id);
+       omap_die_id_usbethaddr();
 
        return 0;
 }
 
-void set_muxconf_regs_essential(void)
+void set_muxconf_regs(void)
 {
        do_set_mux((*ctrl)->control_padconf_core_base,
                   core_padconf_array_essential,
@@ -275,14 +287,21 @@ void set_muxconf_regs_essential(void)
                           sizeof(struct pad_conf_entry));
 }
 
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+#if defined(CONFIG_GENERIC_MMC)
 int board_mmc_init(bd_t *bis)
 {
        return omap_mmc_init(0, 0, 0, -1, -1);
 }
+
+#if !defined(CONFIG_SPL_BUILD)
+void board_mmc_power_init(void)
+{
+       twl6030_power_mmc_init(0);
+}
+#endif
 #endif
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 
 static struct omap_usbhs_board_data usbhs_bdata = {
        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,