board: k2e-evm: add board support

[platform/kernel/u-boot.git] / board / ti / ks2_evm / ddr3_cfg.c

diff --git a/board/ti/ks2_evm/ddr3_cfg.c b/board/ti/ks2_evm/ddr3_cfg.c
index 6e55af9..f7da9f2 100644 (file)
--- a/board/ti/ks2_evm/ddr3_cfg.c
+++ b/board/ti/ks2_evm/ddr3_cfg.c
@@ -93,6 +93,46 @@ struct ddr3_emif_config ddr3_1333_2g = {
 };
 #endif
 
+#ifdef CONFIG_K2E_EVM
+/* DDR3 PHY configuration data with 1600M rate, and 4GB size  */
+struct ddr3_phy_config ddr3phy_1600_4g = {
+       .pllcr          = 0x0001C000ul,
+       .pgcr1_mask     = (IODDRM_MASK | ZCKSEL_MASK),
+       .pgcr1_val      = ((1 << 2) | (1 << 7) | (1 << 23)),
+       .ptr0           = 0x42C21590ul,
+       .ptr1           = 0xD05612C0ul,
+       .ptr2           = 0, /* not set in gel */
+       .ptr3           = 0x08861A80ul,
+       .ptr4           = 0x0C827100ul,
+       .dcr_mask       = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
+       .dcr_val        = ((1 << 10)),
+       .dtpr0          = 0x9D9CBB66ul,
+       .dtpr1          = 0x12840300ul,
+       .dtpr2          = 0x5002D200ul,
+       .mr0            = 0x00001C70ul,
+       .mr1            = 0x00000006ul,
+       .mr2            = 0x00000018ul,
+       .dtcr           = 0x710035C7ul,
+       .pgcr2          = 0x00F07A12ul,
+       .zq0cr1         = 0x0001005Dul,
+       .zq1cr1         = 0x0001005Bul,
+       .zq2cr1         = 0x0001005Bul,
+       .pir_v1         = 0x00000033ul,
+       .pir_v2         = 0x0000FF81ul,
+};
+
+/* DDR3 EMIF configuration data with 1600M rate, and 4GB size  */
+struct ddr3_emif_config ddr3_1600_4g = {
+       .sdcfg          = 0x6200CE62ul,
+       .sdtim1         = 0x166C9855ul,
+       .sdtim2         = 0x00001D4Aul,
+       .sdtim3         = 0x421DFF53ul,
+       .sdtim4         = 0x543F07FFul,
+       .zqcfg          = 0x70073200ul,
+       .sdrfc          = 0x00001869ul,
+};
+#endif
+
 int ddr3_get_dimm_params(char *dimm_name)
 {
        int ret;