Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD

[platform/kernel/u-boot.git] / board / ti / beagle / beagle.c

diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 94b99bf..c1365e2 100644 (file)
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -14,7 +14,9 @@
  * SPDX-License-Identifier:    GPL-2.0+
  */
 #include <common.h>
-#ifdef CONFIG_STATUS_LED
+#include <dm.h>
+#include <ns16550.h>
+#ifdef CONFIG_LED_STATUS
 #include <status_led.h>
 #endif
 #include <twl4030.h>
@@ -27,14 +29,14 @@
 #include <asm/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/omap_musb.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/musb.h>
 #include "beagle.h"
 #include <command.h>
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 #include <usb.h>
 #include <asm/ehci-omap.h>
 #endif
@@ -70,6 +72,18 @@ static struct {
        char env_setting[64];
 } expansion_config;
 
+static const struct ns16550_platdata beagle_serial = {
+       .base = OMAP34XX_UART3,
+       .reg_shift = 2,
+       .clock = V_NS16550_CLK,
+       .fcr = UART_FCR_DEFVAL,
+};
+
+U_BOOT_DEVICE(beagle_uart) = {
+       "ns16550_serial",
+       &beagle_serial
+};
+
 /*
  * Routine: board_init
  * Description: Early hardware init.
@@ -82,8 +96,8 @@ int board_init(void)
        /* boot param addr */
        gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
 
-#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
-       status_led_set (STATUS_LED_BOOT, STATUS_LED_ON);
+#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
+       status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON);
 #endif
 
        return 0;
@@ -103,22 +117,22 @@ int board_init(void)
  */
 static int get_board_revision(void)
 {
-       int revision;
-
-       if (!gpio_request(171, "") &&
-           !gpio_request(172, "") &&
-           !gpio_request(173, "")) {
-
-               gpio_direction_input(171);
-               gpio_direction_input(172);
-               gpio_direction_input(173);
-
-               revision = gpio_get_value(173) << 2 |
-                          gpio_get_value(172) << 1 |
-                          gpio_get_value(171);
-       } else {
-               printf("Error: unable to acquire board revision GPIOs\n");
-               revision = -1;
+       static int revision = -1;
+
+       if (revision == -1) {
+               if (!gpio_request(171, "rev0") &&
+                   !gpio_request(172, "rev1") &&
+                   !gpio_request(173, "rev2")) {
+                       gpio_direction_input(171);
+                       gpio_direction_input(172);
+                       gpio_direction_input(173);
+
+                       revision = gpio_get_value(173) << 2 |
+                               gpio_get_value(172) << 1 |
+                               gpio_get_value(171);
+               } else {
+                       printf("Error: unable to acquire board revision GPIOs\n");
+               }
        }
 
        return revision;
@@ -258,7 +272,7 @@ static void beagle_dvi_pup(void)
        case REVISION_AXBX:
        case REVISION_CX:
        case REVISION_C4:
-               gpio_request(170, "");
+               gpio_request(170, "dvi");
                gpio_direction_output(170, 0);
                gpio_set_value(170, 1);
                break;
@@ -293,12 +307,12 @@ static struct omap_musb_board_data musb_board_data = {
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_MUSB_HOST)
+#if defined(CONFIG_USB_MUSB_HOST)
        .mode           = MUSB_HOST,
-#elif defined(CONFIG_MUSB_GADGET)
+#elif defined(CONFIG_USB_MUSB_GADGET)
        .mode           = MUSB_PERIPHERAL,
 #else
-#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET"
+#error "Please define either CONFIG_USB_MUSB_HOST or CONFIG_USB_MUSB_GADGET"
 #endif
        .config         = &musb_config,
        .power          = 100,
@@ -481,7 +495,7 @@ int misc_init_r(void)
        writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
                GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
 
-       dieid_num_r();
+       omap_die_id_display();
 
 #ifdef CONFIG_VIDEO_OMAP3
        beagle_dvi_pup();
@@ -493,12 +507,8 @@ int misc_init_r(void)
        musb_register(&musb_plat, &musb_board_data, (void *)MUSB_BASE);
 #endif
 
-       if (generate_fake_mac) {
-               u32 id[4];
-
-               get_dieid(id);
-               usb_fake_mac_from_die_id(id);
-       }
+       if (generate_fake_mac)
+               omap_die_id_usbethaddr();
 
        return 0;
 }
@@ -514,14 +524,21 @@ void set_muxconf_regs(void)
        MUX_BEAGLE();
 }
 
-#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_GENERIC_MMC)
 int board_mmc_init(bd_t *bis)
 {
        return omap_mmc_init(0, 0, 0, -1, -1);
 }
 #endif
 
-#if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+       twl4030_power_mmc_init(0);
+}
+#endif
+
+#if defined(CONFIG_USB_EHCI_HCD) && !defined(CONFIG_SPL_BUILD)
 /* Call usb_stop() before starting the kernel */
 void show_boot_progress(int val)
 {
@@ -546,9 +563,9 @@ int ehci_hcd_stop(int index)
        return omap_ehci_hcd_stop();
 }
 
-#endif /* CONFIG_USB_EHCI */
+#endif /* CONFIG_USB_EHCI_HCD */
 
-#if defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)
+#if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)
 int board_eth_init(bd_t *bis)
 {
        return usb_eth_initialize(bis);