* Syed Mohammed Khasim <khasim@ti.com>
*
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
-#ifdef CONFIG_STATUS_LED
+#include <dm.h>
+#include <ns16550.h>
+#ifdef CONFIG_LED_STATUS
#include <status_led.h>
#endif
#include <twl4030.h>
#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/omap_musb.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/musb.h>
#include "beagle.h"
#include <command.h>
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
#include <usb.h>
#include <asm/ehci-omap.h>
#endif
char env_setting[64];
} expansion_config;
+static const struct ns16550_platdata beagle_serial = {
+ .base = OMAP34XX_UART3,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK,
+ .fcr = UART_FCR_DEFVAL,
+};
+
+U_BOOT_DEVICE(beagle_uart) = {
+ "ns16550_serial",
+ &beagle_serial
+};
+
/*
* Routine: board_init
* Description: Early hardware init.
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
- status_led_set (STATUS_LED_BOOT, STATUS_LED_ON);
+#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
+ status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON);
#endif
return 0;
/*
* Routine: get_board_revision
* Description: Detect if we are running on a Beagle revision Ax/Bx,
- * C1/2/3, C4 or xM. This can be done by reading
+ * C1/2/3, C4, xM Ax/Bx or xM Cx. This can be done by reading
* the level of GPIO173, GPIO172 and GPIO171. This should
* result in
* GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx
* GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3
* GPIO173, GPIO172, GPIO171: 1 0 1 => C4
- * GPIO173, GPIO172, GPIO171: 0 0 0 => xM
+ * GPIO173, GPIO172, GPIO171: 0 1 0 => xM Cx
+ * GPIO173, GPIO172, GPIO171: 0 0 0 => xM Ax/Bx
*/
static int get_board_revision(void)
{
- int revision;
-
- if (!gpio_request(171, "") &&
- !gpio_request(172, "") &&
- !gpio_request(173, "")) {
-
- gpio_direction_input(171);
- gpio_direction_input(172);
- gpio_direction_input(173);
-
- revision = gpio_get_value(173) << 2 |
- gpio_get_value(172) << 1 |
- gpio_get_value(171);
- } else {
- printf("Error: unable to acquire board revision GPIOs\n");
- revision = -1;
+ static int revision = -1;
+
+ if (revision == -1) {
+ if (!gpio_request(171, "rev0") &&
+ !gpio_request(172, "rev1") &&
+ !gpio_request(173, "rev2")) {
+ gpio_direction_input(171);
+ gpio_direction_input(172);
+ gpio_direction_input(173);
+
+ revision = gpio_get_value(173) << 2 |
+ gpio_get_value(172) << 1 |
+ gpio_get_value(171);
+ } else {
+ printf("Error: unable to acquire board revision GPIOs\n");
+ }
}
return revision;
timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
break;
}
- case REVISION_XM_A:
- case REVISION_XM_B:
+ case REVISION_XM_AB:
case REVISION_XM_C:
if (pop_mfr == 0) {
/* 256MB DDR */
case REVISION_C4:
omap3_dss_panel_config(&dvid_cfg);
break;
- case REVISION_XM_A:
- case REVISION_XM_B:
+ case REVISION_XM_AB:
case REVISION_XM_C:
default:
omap3_dss_panel_config(&dvid_cfg_xm);
case REVISION_AXBX:
case REVISION_CX:
case REVISION_C4:
- case REVISION_XM_A:
- gpio_request(170, "");
+ gpio_request(170, "dvi");
gpio_direction_output(170, 0);
gpio_set_value(170, 1);
break;
- case REVISION_XM_B:
+ case REVISION_XM_AB:
case REVISION_XM_C:
default:
#define GPIODATADIR1 (TWL4030_BASEADD_GPIO+3)
};
static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_MUSB_HOST)
+#if defined(CONFIG_USB_MUSB_HOST)
.mode = MUSB_HOST,
-#elif defined(CONFIG_MUSB_GADGET)
+#elif defined(CONFIG_USB_MUSB_GADGET)
.mode = MUSB_PERIPHERAL,
#else
-#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET"
+#error "Please define either CONFIG_USB_MUSB_HOST or CONFIG_USB_MUSB_GADGET"
#endif
.config = &musb_config,
.power = 100,
struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
struct control_prog_io *prog_io_base = (struct control_prog_io *)OMAP34XX_CTRL_BASE;
+ bool generate_fake_mac = false;
+ u32 value;
/* Enable i2c2 pullup resisters */
- writel(~(PRG_I2C2_PULLUPRESX), &prog_io_base->io1);
+ value = readl(&prog_io_base->io1);
+ value &= ~(PRG_I2C2_PULLUPRESX);
+ writel(value, &prog_io_base->io1);
switch (get_board_revision()) {
case REVISION_AXBX:
TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
TWL4030_PM_RECEIVER_DEV_GRP_P1);
break;
- case REVISION_XM_A:
- printf("Beagle xM Rev A\n");
- setenv("beaglerev", "xMA");
- MUX_BEAGLE_XM();
- /* Set VAUX2 to 1.8V for EHCI PHY */
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
- TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
- TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
- TWL4030_PM_RECEIVER_DEV_GRP_P1);
- break;
- case REVISION_XM_B:
- printf("Beagle xM Rev B\n");
- setenv("beaglerev", "xMB");
+ case REVISION_XM_AB:
+ printf("Beagle xM Rev A/B\n");
+ setenv("beaglerev", "xMAB");
MUX_BEAGLE_XM();
/* Set VAUX2 to 1.8V for EHCI PHY */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
TWL4030_PM_RECEIVER_DEV_GRP_P1);
+ generate_fake_mac = true;
break;
case REVISION_XM_C:
printf("Beagle xM Rev C\n");
TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
TWL4030_PM_RECEIVER_DEV_GRP_P1);
+ generate_fake_mac = true;
break;
default:
printf("Beagle unknown 0x%02x\n", get_board_revision());
TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
TWL4030_PM_RECEIVER_DEV_GRP_P1);
+ generate_fake_mac = true;
}
switch (get_expansion_id()) {
twl4030_power_init();
switch (get_board_revision()) {
- case REVISION_XM_A:
- case REVISION_XM_B:
+ case REVISION_XM_AB:
twl4030_led_init(TWL4030_LED_LEDEN_LEDBON);
break;
default:
writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
- dieid_num_r();
+ omap_die_id_display();
#ifdef CONFIG_VIDEO_OMAP3
beagle_dvi_pup();
musb_register(&musb_plat, &musb_board_data, (void *)MUSB_BASE);
#endif
+ if (generate_fake_mac)
+ omap_die_id_usbethaddr();
+
return 0;
}
MUX_BEAGLE();
}
-#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_GENERIC_MMC)
int board_mmc_init(bd_t *bis)
{
return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
-#if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
+#endif
+
+#if defined(CONFIG_USB_EHCI_HCD) && !defined(CONFIG_SPL_BUILD)
/* Call usb_stop() before starting the kernel */
void show_boot_progress(int val)
{
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED
};
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+int ehci_hcd_init(int index, enum usb_init_type init,
+ struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
- return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
+ return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
}
int ehci_hcd_stop(int index)
return omap_ehci_hcd_stop();
}
-#endif /* CONFIG_USB_EHCI */
+#endif /* CONFIG_USB_EHCI_HCD */
-#if defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)
+#if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)
int board_eth_init(bd_t *bis)
{
return usb_eth_initialize(bis);
projects / platform / kernel / u-boot.git / blobdiff