*/
#include <common.h>
+#include <i2c.h>
+#include <asm/errno.h>
#include <spl.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mux.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/gpio.h>
+#include <asm/emif.h>
#include "board.h"
DECLARE_GLOBAL_DATA_PTR;
+/*
+ * Read header information from EEPROM into global structure.
+ */
+static int read_eeprom(struct am43xx_board_id *header)
+{
+ /* Check if baseboard eeprom is available */
+ if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
+ printf("Could not probe the EEPROM at 0x%x\n",
+ CONFIG_SYS_I2C_EEPROM_ADDR);
+ return -ENODEV;
+ }
+
+ /* read the eeprom using i2c */
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)header,
+ sizeof(struct am43xx_board_id))) {
+ printf("Could not read the EEPROM\n");
+ return -EIO;
+ }
+
+ if (header->magic != 0xEE3355AA) {
+ /*
+ * read the eeprom using i2c again,
+ * but use only a 1 byte address
+ */
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, (uchar *)header,
+ sizeof(struct am43xx_board_id))) {
+ printf("Could not read the EEPROM at 0x%x\n",
+ CONFIG_SYS_I2C_EEPROM_ADDR);
+ return -EIO;
+ }
+
+ if (header->magic != 0xEE3355AA) {
+ printf("Incorrect magic number (0x%x) in EEPROM\n",
+ header->magic);
+ return -EINVAL;
+ }
+ }
+
+ strncpy(am43xx_board_name, (char *)header->name, sizeof(header->name));
+ am43xx_board_name[sizeof(header->name)] = 0;
+
+ return 0;
+}
+
#ifdef CONFIG_SPL_BUILD
-const struct dpll_params dpll_ddr = {
- -1, -1, -1, -1, -1, -1, -1};
+#define NUM_OPPS 6
+
+const struct dpll_params dpll_mpu[NUM_CRYSTAL_FREQ][NUM_OPPS] = {
+ { /* 19.2 MHz */
+ {-1, -1, -1, -1, -1, -1, -1}, /* OPP 50 */
+ {-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
+ {-1, -1, -1, -1, -1, -1, -1}, /* OPP 100 */
+ {-1, -1, -1, -1, -1, -1, -1}, /* OPP 120 */
+ {-1, -1, -1, -1, -1, -1, -1}, /* OPP TB */
+ {-1, -1, -1, -1, -1, -1, -1} /* OPP NT */
+ },
+ { /* 24 MHz */
+ {300, 23, 1, -1, -1, -1, -1}, /* OPP 50 */
+ {-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
+ {600, 23, 1, -1, -1, -1, -1}, /* OPP 100 */
+ {720, 23, 1, -1, -1, -1, -1}, /* OPP 120 */
+ {800, 23, 1, -1, -1, -1, -1}, /* OPP TB */
+ {1000, 23, 1, -1, -1, -1, -1} /* OPP NT */
+ },
+ { /* 25 MHz */
+ {300, 24, 1, -1, -1, -1, -1}, /* OPP 50 */
+ {-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
+ {600, 24, 1, -1, -1, -1, -1}, /* OPP 100 */
+ {720, 24, 1, -1, -1, -1, -1}, /* OPP 120 */
+ {800, 24, 1, -1, -1, -1, -1}, /* OPP TB */
+ {1000, 24, 1, -1, -1, -1, -1} /* OPP NT */
+ },
+ { /* 26 MHz */
+ {300, 25, 1, -1, -1, -1, -1}, /* OPP 50 */
+ {-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
+ {600, 25, 1, -1, -1, -1, -1}, /* OPP 100 */
+ {720, 25, 1, -1, -1, -1, -1}, /* OPP 120 */
+ {800, 25, 1, -1, -1, -1, -1}, /* OPP TB */
+ {1000, 25, 1, -1, -1, -1, -1} /* OPP NT */
+ },
+};
+
+const struct dpll_params dpll_core[NUM_CRYSTAL_FREQ] = {
+ {-1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {1000, 23, -1, -1, 10, 8, 4}, /* 24 MHz */
+ {1000, 24, -1, -1, 10, 8, 4}, /* 25 MHz */
+ {1000, 25, -1, -1, 10, 8, 4} /* 26 MHz */
+};
+
+const struct dpll_params dpll_per[NUM_CRYSTAL_FREQ] = {
+ {-1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {960, 23, 5, -1, -1, -1, -1}, /* 24 MHz */
+ {960, 24, 5, -1, -1, -1, -1}, /* 25 MHz */
+ {960, 25, 5, -1, -1, -1, -1} /* 26 MHz */
+};
+
+const struct dpll_params epos_evm_dpll_ddr = {
+ 266, 24, 1, -1, 1, -1, -1};
+
+const struct dpll_params gp_evm_dpll_ddr = {
+ 400, 23, 1, -1, 1, -1, -1};
+
+const struct ctrl_ioregs ioregs_lpddr2 = {
+ .cm0ioctl = LPDDR2_ADDRCTRL_IOCTRL_VALUE,
+ .cm1ioctl = LPDDR2_ADDRCTRL_WD0_IOCTRL_VALUE,
+ .cm2ioctl = LPDDR2_ADDRCTRL_WD1_IOCTRL_VALUE,
+ .dt0ioctl = LPDDR2_DATA0_IOCTRL_VALUE,
+ .dt1ioctl = LPDDR2_DATA0_IOCTRL_VALUE,
+ .dt2ioctrl = LPDDR2_DATA0_IOCTRL_VALUE,
+ .dt3ioctrl = LPDDR2_DATA0_IOCTRL_VALUE,
+ .emif_sdram_config_ext = 0x1,
+};
+
+const struct emif_regs emif_regs_lpddr2 = {
+ .sdram_config = 0x808012BA,
+ .ref_ctrl = 0x0000040D,
+ .sdram_tim1 = 0xEA86B411,
+ .sdram_tim2 = 0x103A094A,
+ .sdram_tim3 = 0x0F6BA37F,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x50074BE4,
+ .temp_alert_config = 0x0,
+ .emif_rd_wr_lvl_rmp_win = 0x0,
+ .emif_rd_wr_lvl_rmp_ctl = 0x0,
+ .emif_rd_wr_lvl_ctl = 0x0,
+ .emif_ddr_phy_ctlr_1 = 0x0E084006,
+ .emif_rd_wr_exec_thresh = 0x00000405,
+ .emif_ddr_ext_phy_ctrl_1 = 0x04010040,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00500050,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00500050,
+ .emif_ddr_ext_phy_ctrl_4 = 0x00500050,
+ .emif_ddr_ext_phy_ctrl_5 = 0x00500050
+};
+
+const u32 ext_phy_ctrl_const_base_lpddr2[] = {
+ 0x00500050,
+ 0x00350035,
+ 0x00350035,
+ 0x00350035,
+ 0x00350035,
+ 0x00350035,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x40001000,
+ 0x08102040
+};
+
+const struct ctrl_ioregs ioregs_ddr3 = {
+ .cm0ioctl = DDR3_ADDRCTRL_IOCTRL_VALUE,
+ .cm1ioctl = DDR3_ADDRCTRL_WD0_IOCTRL_VALUE,
+ .cm2ioctl = DDR3_ADDRCTRL_WD1_IOCTRL_VALUE,
+ .dt0ioctl = DDR3_DATA0_IOCTRL_VALUE,
+ .dt1ioctl = DDR3_DATA0_IOCTRL_VALUE,
+ .dt2ioctrl = DDR3_DATA0_IOCTRL_VALUE,
+ .dt3ioctrl = DDR3_DATA0_IOCTRL_VALUE,
+ .emif_sdram_config_ext = 0x0143,
+};
+
+const struct emif_regs ddr3_emif_regs_400Mhz = {
+ .sdram_config = 0x638413B2,
+ .ref_ctrl = 0x00000C30,
+ .sdram_tim1 = 0xEAAAD4DB,
+ .sdram_tim2 = 0x266B7FDA,
+ .sdram_tim3 = 0x107F8678,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x50074BE4,
+ .temp_alert_config = 0x0,
+ .emif_ddr_phy_ctlr_1 = 0x0E084008,
+ .emif_ddr_ext_phy_ctrl_1 = 0x08020080,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00400040,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00400040,
+ .emif_ddr_ext_phy_ctrl_4 = 0x00400040,
+ .emif_ddr_ext_phy_ctrl_5 = 0x00400040,
+ .emif_rd_wr_lvl_rmp_win = 0x0,
+ .emif_rd_wr_lvl_rmp_ctl = 0x0,
+ .emif_rd_wr_lvl_ctl = 0x0,
+ .emif_rd_wr_exec_thresh = 0x00000405
+};
+
+const u32 ext_phy_ctrl_const_base_ddr3[] = {
+ 0x00400040,
+ 0x00350035,
+ 0x00350035,
+ 0x00350035,
+ 0x00350035,
+ 0x00350035,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00340034,
+ 0x00340034,
+ 0x00340034,
+ 0x00340034,
+ 0x00340034,
+ 0x0,
+ 0x0,
+ 0x40000000,
+ 0x08102040
+};
+
+void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
+{
+ if (board_is_eposevm()) {
+ *regs = ext_phy_ctrl_const_base_lpddr2;
+ *size = ARRAY_SIZE(ext_phy_ctrl_const_base_lpddr2);
+ } else if (board_is_gpevm()) {
+ *regs = ext_phy_ctrl_const_base_ddr3;
+ *size = ARRAY_SIZE(ext_phy_ctrl_const_base_ddr3);
+ }
+
+ return;
+}
const struct dpll_params *get_dpll_ddr_params(void)
{
- return &dpll_ddr;
+ struct am43xx_board_id header;
+
+ enable_i2c0_pin_mux();
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
+ if (read_eeprom(&header) < 0)
+ puts("Could not get board ID.\n");
+
+ if (board_is_eposevm())
+ return &epos_evm_dpll_ddr;
+ else if (board_is_gpevm())
+ return &gp_evm_dpll_ddr;
+
+ puts(" Board not supported\n");
+ return NULL;
+}
+
+/*
+ * get_sys_clk_index : returns the index of the sys_clk read from
+ * ctrl status register. This value is either
+ * read from efuse or sysboot pins.
+ */
+static u32 get_sys_clk_index(void)
+{
+ struct ctrl_stat *ctrl = (struct ctrl_stat *)CTRL_BASE;
+ u32 ind = readl(&ctrl->statusreg), src;
+
+ src = (ind & CTRL_CRYSTAL_FREQ_SRC_MASK) >> CTRL_CRYSTAL_FREQ_SRC_SHIFT;
+ if (src == CTRL_CRYSTAL_FREQ_SRC_EFUSE) /* Value read from EFUSE */
+ return ((ind & CTRL_CRYSTAL_FREQ_SELECTION_MASK) >>
+ CTRL_CRYSTAL_FREQ_SELECTION_SHIFT);
+ else /* Value read from SYS BOOT pins */
+ return ((ind & CTRL_SYSBOOT_15_14_MASK) >>
+ CTRL_SYSBOOT_15_14_SHIFT);
+}
+
+/*
+ * get_opp_offset:
+ * Returns the index for safest OPP of the device to boot.
+ * max_off: Index of the MAX OPP in DEV ATTRIBUTE register.
+ * min_off: Index of the MIN OPP in DEV ATTRIBUTE register.
+ * This data is read from dev_attribute register which is e-fused.
+ * A'1' in bit indicates OPP disabled and not available, a '0' indicates
+ * OPP available. Lowest OPP starts with min_off. So returning the
+ * bit with rightmost '0'.
+ */
+static int get_opp_offset(int max_off, int min_off)
+{
+ struct ctrl_stat *ctrl = (struct ctrl_stat *)CTRL_BASE;
+ int opp = readl(&ctrl->dev_attr), offset, i;
+
+ for (i = max_off; i >= min_off; i--) {
+ offset = opp & (1 << i);
+ if (!offset)
+ return i;
+ }
+
+ return min_off;
+}
+
+const struct dpll_params *get_dpll_mpu_params(void)
+{
+ int opp = get_opp_offset(DEV_ATTR_MAX_OFFSET, DEV_ATTR_MIN_OFFSET);
+ u32 ind = get_sys_clk_index();
+
+ return &dpll_mpu[ind][opp];
+}
+
+const struct dpll_params *get_dpll_core_params(void)
+{
+ int ind = get_sys_clk_index();
+
+ return &dpll_core[ind];
+}
+
+const struct dpll_params *get_dpll_per_params(void)
+{
+ int ind = get_sys_clk_index();
+
+ return &dpll_per[ind];
}
void set_uart_mux_conf(void)
enable_board_pin_mux();
}
+static void enable_vtt_regulator(void)
+{
+ u32 temp;
+
+ /* enable module */
+ writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO5_BASE + OMAP_GPIO_CTRL);
+
+ /* enable output for GPIO5_7 */
+ writel(GPIO_SETDATAOUT(7),
+ AM33XX_GPIO5_BASE + OMAP_GPIO_SETDATAOUT);
+ temp = readl(AM33XX_GPIO5_BASE + OMAP_GPIO_OE);
+ temp = temp & ~(GPIO_OE_ENABLE(7));
+ writel(temp, AM33XX_GPIO5_BASE + OMAP_GPIO_OE);
+}
+
void sdram_init(void)
{
+ /*
+ * EPOS EVM has 1GB LPDDR2 connected to EMIF.
+ * GP EMV has 1GB DDR3 connected to EMIF
+ * along with VTT regulator.
+ */
+ if (board_is_eposevm()) {
+ config_ddr(0, &ioregs_lpddr2, NULL, NULL, &emif_regs_lpddr2, 0);
+ } else if (board_is_gpevm()) {
+ enable_vtt_regulator();
+ config_ddr(0, &ioregs_ddr3, NULL, NULL,
+ &ddr3_emif_regs_400Mhz, 0);
+ }
}
#endif
int board_init(void)
{
- gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ char safe_string[HDR_NAME_LEN + 1];
+ struct am43xx_board_id header;
+
+ if (read_eeprom(&header) < 0)
+ puts("Could not get board ID.\n");
+
+ /* Now set variables based on the header. */
+ strncpy(safe_string, (char *)header.name, sizeof(header.name));
+ safe_string[sizeof(header.name)] = 0;
+ setenv("board_name", safe_string);
+
+ strncpy(safe_string, (char *)header.version, sizeof(header.version));
+ safe_string[sizeof(header.version)] = 0;
+ setenv("board_rev", safe_string);
+#endif
return 0;
}
#endif
projects / kernel / u-boot.git / blobdiff