*/
#include <common.h>
+#include <clock_legacy.h>
#include <dm.h>
#include <env.h>
#include <hang.h>
#include <asm/arch/cpu.h>
#include <asm/arch/display.h>
#include <asm/arch/dram.h>
-#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/prcm.h>
+#include <asm/arch/pmic_bus.h>
#include <asm/arch/spl.h>
+#include <asm/global_data.h>
#include <linux/delay.h>
#include <u-boot/crc.h>
#ifndef CONFIG_ARM64
#include <u-boot/crc.h>
#include <env_internal.h>
#include <linux/libfdt.h>
+#include <fdt_support.h>
#include <nand.h>
#include <net.h>
#include <spl.h>
#include <sy8106a.h>
#include <asm/setup.h>
-
-#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
-/* So that we can use pin names in Kconfig and sunxi_name_to_gpio() */
-int soft_i2c_gpio_sda;
-int soft_i2c_gpio_scl;
-
-static int soft_i2c_board_init(void)
-{
- int ret;
-
- soft_i2c_gpio_sda = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SDA);
- if (soft_i2c_gpio_sda < 0) {
- printf("Error invalid soft i2c sda pin: '%s', err %d\n",
- CONFIG_VIDEO_LCD_PANEL_I2C_SDA, soft_i2c_gpio_sda);
- return soft_i2c_gpio_sda;
- }
- ret = gpio_request(soft_i2c_gpio_sda, "soft-i2c-sda");
- if (ret) {
- printf("Error requesting soft i2c sda pin: '%s', err %d\n",
- CONFIG_VIDEO_LCD_PANEL_I2C_SDA, ret);
- return ret;
- }
-
- soft_i2c_gpio_scl = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SCL);
- if (soft_i2c_gpio_scl < 0) {
- printf("Error invalid soft i2c scl pin: '%s', err %d\n",
- CONFIG_VIDEO_LCD_PANEL_I2C_SCL, soft_i2c_gpio_scl);
- return soft_i2c_gpio_scl;
- }
- ret = gpio_request(soft_i2c_gpio_scl, "soft-i2c-scl");
- if (ret) {
- printf("Error requesting soft i2c scl pin: '%s', err %d\n",
- CONFIG_VIDEO_LCD_PANEL_I2C_SCL, ret);
- return ret;
- }
-
- return 0;
-}
-#else
-static int soft_i2c_board_init(void) { return 0; }
-#endif
+#include <status_led.h>
DECLARE_GLOBAL_DATA_PTR;
clock_twi_onoff(5, 1);
sunxi_gpio_set_cfgpin(SUNXI_GPL(8), SUN50I_GPL_R_TWI);
sunxi_gpio_set_cfgpin(SUNXI_GPL(9), SUN50I_GPL_R_TWI);
+#elif CONFIG_MACH_SUN50I_H616
+ clock_twi_onoff(5, 1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN50I_H616_GPL_R_TWI);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN50I_H616_GPL_R_TWI);
#else
clock_twi_onoff(5, 1);
sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_H3_GPL_R_TWI);
gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100);
-#ifndef CONFIG_ARM64
+#if !defined(CONFIG_ARM64) && !defined(CONFIG_MACH_SUNIV)
asm volatile("mrc p15, 0, %0, c0, c1, 1" : "=r"(id_pfr1));
debug("id_pfr1: 0x%08x\n", id_pfr1);
/* Generic Timer Extension available? */
#endif
}
}
-#endif /* !CONFIG_ARM64 */
+#endif /* !CONFIG_ARM64 && !CONFIG_MACH_SUNIV */
ret = axp_gpio_init();
if (ret)
return ret;
-#ifdef CONFIG_SATAPWR
- satapwr_pin = sunxi_name_to_gpio(CONFIG_SATAPWR);
- gpio_request(satapwr_pin, "satapwr");
- gpio_direction_output(satapwr_pin, 1);
- /* Give attached sata device time to power-up to avoid link timeouts */
- mdelay(500);
-#endif
-#ifdef CONFIG_MACPWR
- macpwr_pin = sunxi_name_to_gpio(CONFIG_MACPWR);
- gpio_request(macpwr_pin, "macpwr");
- gpio_direction_output(macpwr_pin, 1);
-#endif
+ /* strcmp() would look better, but doesn't get optimised away. */
+ if (CONFIG_SATAPWR[0]) {
+ satapwr_pin = sunxi_name_to_gpio(CONFIG_SATAPWR);
+ if (satapwr_pin >= 0) {
+ gpio_request(satapwr_pin, "satapwr");
+ gpio_direction_output(satapwr_pin, 1);
+
+ /*
+ * Give the attached SATA device time to power-up
+ * to avoid link timeouts
+ */
+ mdelay(500);
+ }
+ }
+
+ if (CONFIG_MACPWR[0]) {
+ macpwr_pin = sunxi_name_to_gpio(CONFIG_MACPWR);
+ if (macpwr_pin >= 0) {
+ gpio_request(macpwr_pin, "macpwr");
+ gpio_direction_output(macpwr_pin, 1);
+ }
+ }
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
/*
* Temporary workaround for enabling I2C clocks until proper sunxi DM
* clk, reset and pinctrl drivers land.
#endif
#endif /* CONFIG_DM_MMC */
- /* Uses dm gpio code so do this here and not in i2c_init_board() */
- return soft_i2c_board_init();
+ return 0;
}
/*
static void mmc_pinmux_setup(int sdc)
{
unsigned int pin;
- __maybe_unused int pins;
switch (sdc) {
case 0:
break;
case 1:
- pins = sunxi_name_to_gpio_bank(CONFIG_MMC1_PINS);
-
#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I) || \
defined(CONFIG_MACH_SUN8I_R40)
- if (pins == SUNXI_GPIO_H) {
+ if (IS_ENABLED(CONFIG_MMC1_PINS_PH)) {
/* SDC1: PH22-PH-27 */
for (pin = SUNXI_GPH(22); pin <= SUNXI_GPH(27); pin++) {
sunxi_gpio_set_cfgpin(pin, SUN4I_GPH_SDC1);
sunxi_gpio_set_drv(pin, 2);
}
#elif defined(CONFIG_MACH_SUN8I)
- if (pins == SUNXI_GPIO_D) {
- /* SDC1: PD2-PD7 */
- for (pin = SUNXI_GPD(2); pin <= SUNXI_GPD(7); pin++) {
- sunxi_gpio_set_cfgpin(pin, SUN8I_GPD_SDC1);
- sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
- sunxi_gpio_set_drv(pin, 2);
- }
- } else {
- /* SDC1: PG0-PG5 */
- for (pin = SUNXI_GPG(0); pin <= SUNXI_GPG(5); pin++) {
- sunxi_gpio_set_cfgpin(pin, SUN8I_GPG_SDC1);
- sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
- sunxi_gpio_set_drv(pin, 2);
- }
+ /* SDC1: PG0-PG5 */
+ for (pin = SUNXI_GPG(0); pin <= SUNXI_GPG(5); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN8I_GPG_SDC1);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
}
#endif
break;
case 2:
- pins = sunxi_name_to_gpio_bank(CONFIG_MMC2_PINS);
-
#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
/* SDC2: PC6-PC11 */
for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(11); pin++) {
sunxi_gpio_set_drv(pin, 2);
}
#elif defined(CONFIG_MACH_SUN5I)
- if (pins == SUNXI_GPIO_E) {
- /* SDC2: PE4-PE9 */
- for (pin = SUNXI_GPE(4); pin <= SUNXI_GPD(9); pin++) {
- sunxi_gpio_set_cfgpin(pin, SUN5I_GPE_SDC2);
- sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
- sunxi_gpio_set_drv(pin, 2);
- }
- } else {
- /* SDC2: PC6-PC15 */
- for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(15); pin++) {
- sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
- sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
- sunxi_gpio_set_drv(pin, 2);
- }
+ /* SDC2: PC6-PC15 */
+ for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(15); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
}
#elif defined(CONFIG_MACH_SUN6I)
- if (pins == SUNXI_GPIO_A) {
- /* SDC2: PA9-PA14 */
- for (pin = SUNXI_GPA(9); pin <= SUNXI_GPA(14); pin++) {
- sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_SDC2);
- sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
- sunxi_gpio_set_drv(pin, 2);
- }
- } else {
- /* SDC2: PC6-PC15, PC24 */
- for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(15); pin++) {
- sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
- sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
- sunxi_gpio_set_drv(pin, 2);
- }
-
- sunxi_gpio_set_cfgpin(SUNXI_GPC(24), SUNXI_GPC_SDC2);
- sunxi_gpio_set_pull(SUNXI_GPC(24), SUNXI_GPIO_PULL_UP);
- sunxi_gpio_set_drv(SUNXI_GPC(24), 2);
+ /* SDC2: PC6-PC15, PC24 */
+ for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(15); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
}
+
+ sunxi_gpio_set_cfgpin(SUNXI_GPC(24), SUNXI_GPC_SDC2);
+ sunxi_gpio_set_pull(SUNXI_GPC(24), SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(SUNXI_GPC(24), 2);
#elif defined(CONFIG_MACH_SUN8I_R40)
/* SDC2: PC6-PC15, PC24 */
for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(15); pin++) {
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
sunxi_gpio_set_drv(pin, 2);
}
+#elif defined(CONFIG_MACH_SUN50I_H616)
+ /* SDC2: PC0-PC1, PC5-PC6, PC8-PC11, PC13-PC16 */
+ for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(16); pin++) {
+ if (pin > SUNXI_GPC(1) && pin < SUNXI_GPC(5))
+ continue;
+ if (pin == SUNXI_GPC(7) || pin == SUNXI_GPC(12))
+ continue;
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 3);
+ }
#elif defined(CONFIG_MACH_SUN9I)
/* SDC2: PC6-PC16 */
for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(16); pin++) {
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
sunxi_gpio_set_drv(pin, 2);
}
+#else
+ puts("ERROR: No pinmux setup defined for MMC2!\n");
#endif
break;
case 3:
- pins = sunxi_name_to_gpio_bank(CONFIG_MMC3_PINS);
-
#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I) || \
defined(CONFIG_MACH_SUN8I_R40)
/* SDC3: PI4-PI9 */
sunxi_gpio_set_drv(pin, 2);
}
#elif defined(CONFIG_MACH_SUN6I)
- if (pins == SUNXI_GPIO_A) {
- /* SDC3: PA9-PA14 */
- for (pin = SUNXI_GPA(9); pin <= SUNXI_GPA(14); pin++) {
- sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_SDC3);
- sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
- sunxi_gpio_set_drv(pin, 2);
- }
- } else {
- /* SDC3: PC6-PC15, PC24 */
- for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(15); pin++) {
- sunxi_gpio_set_cfgpin(pin, SUN6I_GPC_SDC3);
- sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
- sunxi_gpio_set_drv(pin, 2);
- }
-
- sunxi_gpio_set_cfgpin(SUNXI_GPC(24), SUN6I_GPC_SDC3);
- sunxi_gpio_set_pull(SUNXI_GPC(24), SUNXI_GPIO_PULL_UP);
- sunxi_gpio_set_drv(SUNXI_GPC(24), 2);
+ /* SDC3: PC6-PC15, PC24 */
+ for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(15); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUN6I_GPC_SDC3);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
}
+
+ sunxi_gpio_set_cfgpin(SUNXI_GPC(24), SUN6I_GPC_SDC3);
+ sunxi_gpio_set_pull(SUNXI_GPC(24), SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(SUNXI_GPC(24), 2);
#endif
break;
return 0;
}
+
+#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
+int mmc_get_env_dev(void)
+{
+ switch (sunxi_get_boot_device()) {
+ case BOOT_DEVICE_MMC1:
+ return 0;
+ case BOOT_DEVICE_MMC2:
+ return 1;
+ default:
+ return CONFIG_SYS_MMC_ENV_DEV;
+ }
+}
+#endif
#endif
#ifdef CONFIG_SPL_BUILD
{
int power_failed = 0;
+#ifdef CONFIG_LED_STATUS
+ if (IS_ENABLED(CONFIG_SPL_DRIVERS_MISC))
+ status_led_init();
+#endif
+
#ifdef CONFIG_SY8106A_POWER
power_failed = sy8106a_set_vout1(CONFIG_SY8106A_VOUT1_VOLT);
#endif
#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
- defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \
- defined CONFIG_AXP818_POWER
+ defined CONFIG_AXP221_POWER || defined CONFIG_AXP305_POWER || \
+ defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
power_failed = axp_init();
+ if (IS_ENABLED(CONFIG_AXP_DISABLE_BOOT_ON_POWERON) && !power_failed) {
+ u8 boot_reason;
+
+ pmic_bus_read(AXP_POWER_STATUS, &boot_reason);
+ if (boot_reason & AXP_POWER_STATUS_ALDO_IN) {
+ printf("Power on by plug-in, shutting down.\n");
+ pmic_bus_write(0x32, BIT(7));
+ }
+ }
+
#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \
defined CONFIG_AXP818_POWER
power_failed |= axp_set_dcdc1(CONFIG_AXP_DCDC1_VOLT);
#endif
+#if !defined(CONFIG_AXP305_POWER)
power_failed |= axp_set_dcdc2(CONFIG_AXP_DCDC2_VOLT);
power_failed |= axp_set_dcdc3(CONFIG_AXP_DCDC3_VOLT);
+#endif
#if !defined(CONFIG_AXP209_POWER) && !defined(CONFIG_AXP818_POWER)
power_failed |= axp_set_dcdc4(CONFIG_AXP_DCDC4_VOLT);
#endif
defined CONFIG_AXP818_POWER
power_failed |= axp_set_aldo1(CONFIG_AXP_ALDO1_VOLT);
#endif
+#if !defined(CONFIG_AXP305_POWER)
power_failed |= axp_set_aldo2(CONFIG_AXP_ALDO2_VOLT);
-#if !defined(CONFIG_AXP152_POWER)
+#endif
+#if !defined(CONFIG_AXP152_POWER) && !defined(CONFIG_AXP305_POWER)
power_failed |= axp_set_aldo3(CONFIG_AXP_ALDO3_VOLT);
#endif
#ifdef CONFIG_AXP209_POWER
* assured it's being powered with suitable core voltage
*/
if (!power_failed)
- clock_set_pll1(CONFIG_SYS_CLK_FREQ);
+ clock_set_pll1(get_board_sys_clk());
else
printf("Failed to set core voltage! Can't set CPU frequency\n");
}
return ret;
}
- ret = sun4i_usb_phy_vbus_detect(&phy);
- if (ret == 1) {
- pr_err("A charger is plugged into the OTG\n");
- return -ENODEV;
- }
-
- return ret;
+ return sun4i_usb_phy_vbus_detect(&phy);
}
#endif
return 0;
}
+static void bluetooth_dt_fixup(void *blob)
+{
+ /* Some devices ship with a Bluetooth controller default address.
+ * Set a valid address through the device tree.
+ */
+ uchar tmp[ETH_ALEN], bdaddr[ETH_ALEN];
+ unsigned int sid[4];
+ int i;
+
+ if (!CONFIG_BLUETOOTH_DT_DEVICE_FIXUP[0])
+ return;
+
+ if (eth_env_get_enetaddr("bdaddr", tmp)) {
+ /* Convert between the binary formats of the corresponding stacks */
+ for (i = 0; i < ETH_ALEN; ++i)
+ bdaddr[i] = tmp[ETH_ALEN - i - 1];
+ } else {
+ if (!get_unique_sid(sid))
+ return;
+
+ bdaddr[0] = ((sid[3] >> 0) & 0xff) ^ 1;
+ bdaddr[1] = (sid[3] >> 8) & 0xff;
+ bdaddr[2] = (sid[3] >> 16) & 0xff;
+ bdaddr[3] = (sid[3] >> 24) & 0xff;
+ bdaddr[4] = (sid[0] >> 0) & 0xff;
+ bdaddr[5] = 0x02;
+ }
+
+ do_fixup_by_compat(blob, CONFIG_BLUETOOTH_DT_DEVICE_FIXUP,
+ "local-bd-address", bdaddr, ETH_ALEN, 1);
+}
+
int ft_board_setup(void *blob, struct bd_info *bd)
{
int __maybe_unused r;
/*
- * Call setup_environment again in case the boot fdt has
- * ethernet aliases the u-boot copy does not have.
+ * Call setup_environment and fdt_fixup_ethernet again
+ * in case the boot fdt has ethernet aliases the u-boot
+ * copy does not have.
*/
setup_environment(blob);
+ fdt_fixup_ethernet(blob);
+
+ bluetooth_dt_fixup(blob);
#ifdef CONFIG_VIDEO_DT_SIMPLEFB
r = sunxi_simplefb_setup(blob);
projects / platform / kernel / u-boot.git / blobdiff