if ARCH_SUNXI
+config IDENT_STRING
+ default " Allwinner Technology"
+
+config PRE_CONSOLE_BUFFER
+ default y
+
+config SPL_GPIO_SUPPORT
+ default y
+
+config SPL_LIBCOMMON_SUPPORT
+ default y
+
+config SPL_LIBDISK_SUPPORT
+ default y
+
+config SPL_LIBGENERIC_SUPPORT
+ default y
+
+config SPL_MMC_SUPPORT
+ default y
+
+config SPL_POWER_SUPPORT
+ default y
+
+config SPL_SERIAL_SUPPORT
+ default y
+
# Note only one of these may be selected at a time! But hidden choices are
# not supported by Kconfig
config SUNXI_GEN_SUN4I
choice
prompt "Sunxi SoC Variant"
+ optional
config MACH_SUN4I
bool "sun4i (Allwinner A10)"
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
+ select ARCH_SUPPORT_PSCI
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
+ select ARCH_SUPPORT_PSCI
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
+ select ARCH_SUPPORT_PSCI
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
+ select ARCH_SUPPORT_PSCI
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
+ select ARCH_SUPPORT_PSCI
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
bool "sun9i (Allwinner A80)"
select CPU_V7
select SUNXI_GEN_SUN6I
+ select SUPPORT_SPL
config MACH_SUN50I
bool "sun50i (Allwinner A64)"
select ARM64
select SUNXI_GEN_SUN6I
+ select SUPPORT_SPL
endchoice
bool
default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_H3 || MACH_SUN8I_A83T
+config RESERVE_ALLWINNER_BOOT0_HEADER
+ bool "reserve space for Allwinner boot0 header"
+ select ENABLE_ARM_SOC_BOOT0_HOOK
+ ---help---
+ Prepend a 1536 byte (empty) header to the U-Boot image file, to be
+ filled with magic values post build. The Allwinner provided boot0
+ blob relies on this information to load and execute U-Boot.
+ Only needed on 64-bit Allwinner boards so far when using boot0.
+
+config ARM_BOOT_HOOK_RMR
+ bool
+ depends on ARM64
+ default y
+ select ENABLE_ARM_SOC_BOOT0_HOOK
+ ---help---
+ Insert some ARM32 code at the very beginning of the U-Boot binary
+ which uses an RMR register write to bring the core into AArch64 mode.
+ The very first instruction acts as a switch, since it's carefully
+ chosen to be a NOP in one mode and a branch in the other, so the
+ code would only be executed if not already in AArch64.
+ This allows both the SPL and the U-Boot proper to be entered in
+ either mode and switch to AArch64 if needed.
+
config DRAM_TYPE
int "sunxi dram type"
depends on MACH_SUN8I_A83T
config DRAM_CLK
int "sunxi dram clock speed"
+ default 792 if MACH_SUN9I
default 312 if MACH_SUN6I || MACH_SUN8I
default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
+ default 672 if MACH_SUN50I
---help---
- Set the dram clock speed, valid range 240 - 480, must be a multiple
- of 24.
+ Set the dram clock speed, valid range 240 - 480 (prior to sun9i),
+ must be a multiple of 24. For the sun9i (A80), the tested values
+ (for DDR3-1600) are 312 to 792.
if MACH_SUN5I || MACH_SUN7I
config DRAM_MBUS_CLK
int "sunxi dram zq value"
default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
default 127 if MACH_SUN7I
+ default 4145117 if MACH_SUN9I
+ default 3881915 if MACH_SUN50I
---help---
Set the dram zq value.
bool "sunxi dram odt enable"
default n if !MACH_SUN8I_A23
default y if MACH_SUN8I_A23
+ default y if MACH_SUN50I
---help---
Select this to enable dram odt (on die termination).
config SYS_CLK_FREQ
default 816000000 if MACH_SUN50I
default 912000000 if MACH_SUN7I
- default 1008000000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
+ default 1008000000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I || MACH_SUN9I
config SYS_CONFIG_NAME
default "sun4i" if MACH_SUN4I
Only enable this if you really know what you are doing.
config OLD_SUNXI_KERNEL_COMPAT
- boolean "Enable workarounds for booting old kernels"
+ bool "Enable workarounds for booting old kernels"
default n
---help---
Set this to enable various workarounds for old kernels, this results in
bool "Enable I2C/TWI controller 0"
default y if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
default n if MACH_SUN6I || MACH_SUN8I
+ select CMD_I2C
---help---
This allows enabling I2C/TWI controller 0 by muxing its pins, enabling
its clock and setting up the bus. This is especially useful on devices
config I2C1_ENABLE
bool "Enable I2C/TWI controller 1"
default n
+ select CMD_I2C
---help---
See I2C0_ENABLE help text.
config I2C2_ENABLE
bool "Enable I2C/TWI controller 2"
default n
+ select CMD_I2C
---help---
See I2C0_ENABLE help text.
config I2C3_ENABLE
bool "Enable I2C/TWI controller 3"
default n
+ select CMD_I2C
---help---
See I2C0_ENABLE help text.
endif
bool "Enable the PRCM I2C/TWI controller"
# This is used for the pmic on H3
default y if SY8106A_POWER
+ select CMD_I2C
---help---
Set this to y to enable the I2C controller which is part of the PRCM.
endif
config I2C4_ENABLE
bool "Enable I2C/TWI controller 4"
default n
+ select CMD_I2C
---help---
See I2C0_ENABLE help text.
endif
config AXP_GPIO
- boolean "Enable support for gpio-s on axp PMICs"
+ bool "Enable support for gpio-s on axp PMICs"
default n
---help---
Say Y here to enable support for the gpio pins of the axp PMIC ICs.
config VIDEO
- boolean "Enable graphical uboot console on HDMI, LCD or VGA"
- depends on !MACH_SUN8I_A83T
+ bool "Enable graphical uboot console on HDMI, LCD or VGA"
+ depends on !MACH_SUN8I_A83T && !MACH_SUN8I_H3 && !MACH_SUN9I && !MACH_SUN50I
default y
---help---
Say Y here to add support for using a cfb console on the HDMI, LCD
info on how to select the video output and mode.
config VIDEO_HDMI
- boolean "HDMI output support"
+ bool "HDMI output support"
depends on VIDEO && !MACH_SUN8I
default y
---help---
Say Y here to add support for outputting video over HDMI.
config VIDEO_VGA
- boolean "VGA output support"
+ bool "VGA output support"
depends on VIDEO && (MACH_SUN4I || MACH_SUN7I)
default n
---help---
Say Y here to add support for outputting video over VGA.
config VIDEO_VGA_VIA_LCD
- boolean "VGA via LCD controller support"
+ bool "VGA via LCD controller support"
depends on VIDEO && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I)
default n
---help---
Olimex A13 boards.
config VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH
- boolean "Force sync active high for VGA via LCD controller support"
+ bool "Force sync active high for VGA via LCD controller support"
depends on VIDEO_VGA_VIA_LCD
default n
---help---
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
config VIDEO_COMPOSITE
- boolean "Composite video output support"
+ bool "Composite video output support"
depends on VIDEO && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
default n
---help---
bool "LCD panel needs to be configured via i2c"
depends on VIDEO
default n
+ select CMD_I2C
---help---
Say y here if the LCD panel needs to be configured via i2c. This
will add a bitbang i2c controller using gpios to talk to the LCD.
projects / platform / kernel / u-boot.git / blobdiff