* Author: Christoph Fritz <chf.fritz@googlemail.com>
*/
+#include <init.h>
+#include <net.h>
#include <asm/arch/clock.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/iomux.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/io.h>
#include <asm/mach-imx/mxc_i2c.h>
+#include <env.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
#include <linux/sizes.h>
#include <common.h>
-#include <environment.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
#include <mmc.h>
#include <i2c.h>
#include <miiphy.h>
return 0;
}
-static iomux_v3_cfg_t const uart1_pads[] = {
- MX6_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-static iomux_v3_cfg_t const usdhc2_pads[] = {
- MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_CLK_PAD_CTRL),
- MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_LCD1_VSYNC__GPIO3_IO_28 | MUX_PAD_CTRL(GPIO_PAD_CTRL),
-};
-
-static iomux_v3_cfg_t const usdhc4_pads[] = {
- MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_CLK_PAD_CTRL),
- MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DATA4__USDHC4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DATA5__USDHC4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DATA6__USDHC4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DATA7__USDHC4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_RESET_B__USDHC4_RESET_B | MUX_PAD_CTRL(USDHC_RESET_CTRL),
-};
-
-static iomux_v3_cfg_t const fec1_pads[] = {
- MX6_PAD_ENET1_MDC__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET1_MDIO__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII1_RD0__ENET1_RX_DATA_0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_RGMII1_RD1__ENET1_RX_DATA_1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_RGMII1_TD0__ENET1_TX_DATA_0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII1_TD1__ENET1_TX_DATA_1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII1_RX_CTL__ENET1_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_RGMII1_TX_CTL__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL) |
- MUX_MODE_SION,
- /* LAN8720 PHY Reset */
- MX6_PAD_RGMII1_TD3__GPIO5_IO_9 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
static iomux_v3_cfg_t const pwm_led_pads[] = {
MX6_PAD_RGMII2_RD2__PWM2_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), /* green */
MX6_PAD_RGMII2_TD2__PWM6_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), /* red */
MX6_PAD_RGMII2_RD3__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), /* blue */
};
-static void setup_iomux_uart(void)
-{
- imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-}
-
-#define PHY_RESET IMX_GPIO_NR(5, 9)
-
-int board_eth_init(bd_t *bis)
+static int board_net_init(void)
{
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
- int ret;
unsigned char eth1addr[6];
+ int ret;
- /* just to get secound mac address */
+ /* just to get second mac address */
imx_get_mac_from_fuse(1, eth1addr);
if (!env_get("eth1addr") && is_valid_ethaddr(eth1addr))
eth_env_set_enetaddr("eth1addr", eth1addr);
- imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads));
-
/*
* Generate phy reference clock via pin IOMUX ENET_REF_CLK1/2 by erasing
* ENET1/2_TX_CLK_DIR gpr1[14:13], so that reference clock is driven by
if (ret)
goto eth_fail;
- /* reset phy */
- gpio_direction_output(PHY_RESET, 0);
- mdelay(16);
- gpio_set_value(PHY_RESET, 1);
- mdelay(1);
-
- ret = fecmxc_initialize_multi(bis, 0, CONFIG_FEC_MXC_PHYADDR,
- IMX_FEC_BASE);
+ ret = enable_fec_anatop_clock(1, ENET_50MHZ);
if (ret)
goto eth_fail;
eth_fail:
printf("FEC MXC: %s:failed (%i)\n", __func__, ret);
- gpio_set_value(PHY_RESET, 0);
return ret;
}
return NULL;
pmic_reg_read(p, PFUZE100_DEVICEID, ®);
- printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
+ printf("PMIC: PFUZE%i00 ID=0x%02x\n", (reg & 1) ? 2 : 1, reg);
/* Set SW1AB stanby volage to 0.975V */
pmic_reg_read(p, PFUZE100_SW1ABSTBY, ®);
if (ret < 0)
return ret;
+ set_ldo_voltage(LDO_ARM, 1175); /* Set VDDARM to 1.175V */
+ set_ldo_voltage(LDO_SOC, 1175); /* Set VDDSOC to 1.175V */
+
return 0;
}
int board_early_init_f(void)
{
- setup_iomux_uart();
-
setup_iomux_usb();
return 0;
}
-static struct fsl_esdhc_cfg usdhc_cfg[2] = {
- {USDHC4_BASE_ADDR, 0, 8},
- {USDHC2_BASE_ADDR, 0, 4},
-};
+int board_init(void)
+{
+ /* Address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_SYS_I2C_MXC
+ setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+#endif
-#define USDHC2_CD_GPIO IMX_GPIO_NR(3, 28)
+ return board_net_init();
+}
-int board_mmc_getcd(struct mmc *mmc)
+int checkboard(void)
{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ puts("Board: VIN|ING 2000\n");
- if (cfg->esdhc_base == USDHC4_BASE_ADDR)
- return 1;
- if (cfg->esdhc_base == USDHC2_BASE_ADDR)
- return !gpio_get_value(USDHC2_CD_GPIO);
+ return 0;
+}
- return -EINVAL;
+#define PCIE_PHY_PUP_REQ BIT(7)
+
+void board_preboot_os(void)
+{
+ struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ struct gpc *gpc_regs = (struct gpc *)GPC_BASE_ADDR;
+
+ /* Bring the PCI power domain up, so that old vendorkernel works. */
+ setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN);
+ setbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST);
+ setbits_le32(&gpc_regs->cntr, PCIE_PHY_PUP_REQ);
}
-int board_mmc_init(bd_t *bis)
+#ifdef CONFIG_SPL_BUILD
+#include <linux/libfdt.h>
+#include <spl.h>
+#include <asm/arch/mx6-ddr.h>
+
+static iomux_v3_cfg_t const pcie_pads[] = {
+ MX6_PAD_NAND_DATA02__GPIO4_IO_6 | MUX_PAD_CTRL(GPIO_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const uart_pads[] = {
+ MX6_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const usdhc4_pads[] = {
+ MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA4__USDHC4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA5__USDHC4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA6__USDHC4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA7__USDHC4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+static void vining2000_spl_setup_iomux_pcie(void)
{
- int ret;
+ imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads));
+}
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-Boot device node) (Physical Port)
- * mmc0 USDHC4
- * mmc1 USDHC2
- */
- imx_iomux_v3_setup_multiple_pads(
- usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
-
- imx_iomux_v3_setup_multiple_pads(
- usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
- gpio_direction_input(USDHC2_CD_GPIO);
- usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
- if (ret) {
- printf("Warning: failed to initialize USDHC4\n");
- return ret;
- }
+static void vining2000_spl_setup_iomux_uart(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
+}
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
- if (ret) {
- printf("Warning: failed to initialize USDHC2\n");
- return ret;
- }
+static struct fsl_esdhc_cfg usdhc_cfg = { USDHC4_BASE_ADDR };
- return 0;
+int board_mmc_init(bd_t *bis)
+{
+ imx_iomux_v3_setup_multiple_pads(usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+
+ usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+ gd->arch.sdhc_clk = usdhc_cfg.sdhc_clk;
+ return fsl_esdhc_initialize(bis, &usdhc_cfg);
}
-int board_init(void)
+int board_mmc_getcd(struct mmc *mmc)
{
- /* Address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ return 1;
+}
-#ifdef CONFIG_SYS_I2C_MXC
- setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-#endif
+const struct mx6sx_iomux_ddr_regs mx6_ddr_ioregs = {
+ .dram_dqm0 = 0x00000028,
+ .dram_dqm1 = 0x00000028,
+ .dram_dqm2 = 0x00000028,
+ .dram_dqm3 = 0x00000028,
+ .dram_ras = 0x00000028,
+ .dram_cas = 0x00000028,
+ .dram_odt0 = 0x00000028,
+ .dram_odt1 = 0x00000028,
+ .dram_sdba2 = 0x00000000,
+ .dram_sdcke0 = 0x00003000,
+ .dram_sdcke1 = 0x00003000,
+ .dram_sdclk_0 = 0x00000030,
+ .dram_sdqs0 = 0x00000028,
+ .dram_sdqs1 = 0x00000028,
+ .dram_sdqs2 = 0x00000028,
+ .dram_sdqs3 = 0x00000028,
+ .dram_reset = 0x00000028,
+};
- return 0;
+const struct mx6sx_iomux_grp_regs mx6_grp_ioregs = {
+ .grp_addds = 0x00000028,
+ .grp_b0ds = 0x00000028,
+ .grp_b1ds = 0x00000028,
+ .grp_b2ds = 0x00000028,
+ .grp_b3ds = 0x00000028,
+ .grp_ctlds = 0x00000028,
+ .grp_ddr_type = 0x000c0000,
+ .grp_ddrmode = 0x00020000,
+ .grp_ddrmode_ctl = 0x00020000,
+ .grp_ddrpke = 0x00000000,
+};
+
+const struct mx6_mmdc_calibration mx6_mmcd_calib = {
+ .p0_mpwldectrl0 = 0x0022001C,
+ .p0_mpwldectrl1 = 0x001F001A,
+ .p0_mpdgctrl0 = 0x01380134,
+ .p0_mpdgctrl1 = 0x0124011C,
+ .p0_mprddlctl = 0x42404444,
+ .p0_mpwrdlctl = 0x36383C38,
+};
+
+static struct mx6_ddr3_cfg mem_ddr = {
+ .mem_speed = 1600,
+ .density = 4,
+ .width = 32,
+ .banks = 8,
+ .rowaddr = 15,
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1391,
+ .trcmin = 4875,
+ .trasmin = 3500,
+};
+
+static void ccgr_init(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ writel(0xF000000F, &ccm->CCGR0); /* AIPS_TZ{1,2,3} */
+ writel(0x303C0000, &ccm->CCGR1); /* GPT, OCRAM */
+ writel(0x00FFFCC0, &ccm->CCGR2); /* IPMUX, I2C1, I2C3 */
+ writel(0x3F300030, &ccm->CCGR3); /* OCRAM, MMDC, ENET */
+ writel(0x0000C003, &ccm->CCGR4); /* PCI, PL301 */
+ writel(0x0F0330C3, &ccm->CCGR5); /* UART, ROM */
+ writel(0x00000F00, &ccm->CCGR6); /* SDHI4, EIM */
}
-int checkboard(void)
+static void vining2000_spl_dram_init(void)
{
- puts("Board: VIN|ING 2000\n");
+ struct mx6_ddr_sysinfo sysinfo = {
+ .dsize = mem_ddr.width / 32,
+ .cs_density = 24,
+ .ncs = 1,
+ .cs1_mirror = 0,
+ .rtt_wr = 1, /* RTT_wr = RZQ/4 */
+ .rtt_nom = 1, /* RTT_Nom = RZQ/4 */
+ .walat = 1, /* Write additional latency */
+ .ralat = 5, /* Read additional latency */
+ .mif3_mode = 3, /* Command prediction working mode */
+ .bi_on = 1, /* Bank interleaving enabled */
+ .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
+ .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
+ .ddr_type = DDR_TYPE_DDR3,
+ .refsel = 1, /* Refresh cycles at 32KHz */
+ .refr = 7, /* 8 refresh commands per refresh cycle */
+ };
+
+ mx6sx_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
+ mx6_dram_cfg(&sysinfo, &mx6_mmcd_calib, &mem_ddr);
+
+ /* Perform DDR DRAM calibration */
+ udelay(100);
+ mmdc_do_write_level_calibration(&sysinfo);
+ mmdc_do_dqs_calibration(&sysinfo);
+}
- return 0;
+void board_init_f(ulong dummy)
+{
+ /* setup AIPS and disable watchdog */
+ arch_cpu_init();
+
+ ccgr_init();
+
+ /* iomux setup */
+ vining2000_spl_setup_iomux_pcie();
+ vining2000_spl_setup_iomux_uart();
+
+ /* setup GP timer */
+ timer_init();
+
+ /* reset the PCIe device */
+ gpio_set_value(IMX_GPIO_NR(4, 6), 1);
+ udelay(50);
+ gpio_set_value(IMX_GPIO_NR(4, 6), 0);
+
+ /* UART clocks enabled and gd valid - init serial console */
+ preloader_console_init();
+
+ /* DDR initialization */
+ vining2000_spl_dram_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ /* load/boot image from boot device */
+ board_init_r(NULL, 0);
}
+#endif
projects / platform / kernel / u-boot.git / blobdiff