+// SPDX-License-Identifier: GPL-2.0+
/*
* Board functions for TI AM335X based draco board
* (C) Copyright 2013 Siemens Schweiz AG
* u-boot:/board/ti/am335x/board.c
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <env.h>
#include <errno.h>
+#include <init.h>
#include <spl.h>
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
#include <asm/io.h>
#include <asm/emif.h>
#include <asm/gpio.h>
#include <watchdog.h>
#include "board.h"
#include "../common/factoryset.h"
-
-DECLARE_GLOBAL_DATA_PTR;
+#include <nand.h>
#ifdef CONFIG_SPL_BUILD
static struct draco_baseboard_id __attribute__((section(".data"))) settings;
#if DDR_PLL_FREQ == 303
+#if !defined(CONFIG_TARGET_ETAMIN)
/* Default@303MHz-i0 */
const struct ddr3_data ddr3_default = {
0x33524444, 0x56312e35, 0x0080, 0x0000, 0x003A, 0x003F, 0x009F,
- 0x0079, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32,
+ 0x0079, 0x0888A39B, 0x26517FDA, 0x501F84EF, 0x00100206, 0x61A44A32,
0x0000093B, 0x0000014A,
"default name @303MHz \0",
"default marking \0",
};
+#else
+/* etamin board */
+const struct ddr3_data ddr3_default = {
+ 0x33524444, 0x56312e36, 0x0080, 0x0000, 0x003A, 0x0010, 0x009F,
+ 0x0050, 0x0888A39B, 0x266D7FDA, 0x501F86AF, 0x00100206, 0x61A44BB2,
+ 0x0000093B, 0x0000018A,
+ "test-etamin \0",
+ "generic-8Gbit \0",
+};
+#endif
#elif DDR_PLL_FREQ == 400
/* Default@400MHz-i0 */
const struct ddr3_data ddr3_default = {
printf("clock:\t\t%d MHz\n", DDR_PLL_FREQ);
printf("device:\t\t%s\n", settings.ddr3.manu_name);
printf("marking:\t%s\n", settings.ddr3.manu_marking);
- printf("timing parameters\n");
- printf("diff\teeprom\tdefault\n");
+ printf("%-20s, %-8s, %-8s, %-4s\n", "timing parameters", "eeprom",
+ "default", "diff");
PRINTARGS(magic);
PRINTARGS(version);
PRINTARGS(ddr3_sratio);
static void print_chip_data(void)
{
+ struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+ dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
printf("\nCPU BOARD\n");
printf("device: \t'%s'\n", settings.chip.sdevname);
printf("hw version: \t'%s'\n", settings.chip.shwver);
+ printf("max freq: \t%d MHz\n", dpll_mpu_opp100.m);
}
#endif /* CONFIG_SPL_BUILD */
+#define AM335X_NAND_ECC_MASK 0x0f
+#define AM335X_NAND_ECC_TYPE_16 0x02
+
+static int ecc_type;
+
+struct am335x_nand_geometry {
+ u32 magic;
+ u8 nand_geo_addr;
+ u8 nand_geo_page;
+ u8 nand_bus;
+};
+
+static int draco_read_nand_geometry(void)
+{
+ struct am335x_nand_geometry geo;
+
+ /* Read NAND geometry */
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x80, 2,
+ (uchar *)&geo, sizeof(struct am335x_nand_geometry))) {
+ printf("Could not read the NAND geomtery; something fundamentally wrong on the I2C bus.\n");
+ return -EIO;
+ }
+ if (geo.magic != 0xa657b310) {
+ printf("%s: bad magic: %x\n", __func__, geo.magic);
+ return -EFAULT;
+ }
+ if ((geo.nand_bus & AM335X_NAND_ECC_MASK) == AM335X_NAND_ECC_TYPE_16)
+ ecc_type = 16;
+ else
+ ecc_type = 8;
+
+ return 0;
+}
+
/*
* Read header information from EEPROM into global structure.
*/
printf("Warning: No chip data in eeprom\n");
print_ddr3_timings();
+
+ return draco_read_nand_geometry();
#endif
return 0;
}
draco_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 =
settings.ddr3.emif_ddr_phy_ctlr_1;
draco_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config;
+ draco_ddr3_emif_reg_data.sdram_config2 = 0x08000000;
draco_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl;
draco_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0;
}
#endif /* if def CONFIG_SPL_BUILD */
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ int ret;
+
+ ret = draco_read_nand_geometry();
+ if (ret != 0)
+ return ret;
+
+ nand_curr_device = 0;
+ omap_nand_switch_ecc(1, ecc_type);
+#ifdef CONFIG_TARGET_ETAMIN
+ nand_curr_device = 1;
+ omap_nand_switch_ecc(1, ecc_type);
+#endif
+#ifdef CONFIG_FACTORYSET
+ /* Set ASN in environment*/
+ if (factory_dat.asn[0] != 0) {
+ env_set("dtb_name", (char *)factory_dat.asn);
+ } else {
+ /* dtb suffix gets added in load script */
+ env_set("dtb_name", "am335x-draco");
+ }
+#else
+ env_set("dtb_name", "am335x-draco");
+#endif
+
+ return 0;
+}
+#endif
+
#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
static void cpsw_control(int enabled)
};
#if defined(CONFIG_DRIVER_TI_CPSW) || \
- (defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET))
+ (defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET))
int board_eth_init(bd_t *bis)
{
struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
int n = 0;
int rv;
- factoryset_setenv();
+ factoryset_env_set();
/* Set rgmii mode and enable rmii clock to be sourced from chip */
writel((RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE), &cdev->miisel);
}
static int do_switch_reset(cmd_tbl_t *cmdtp, int flag, int argc,
- char *const argv[])
+ char *const argv[])
{
/* Reset SMSC LAN9303 switch for default configuration */
gpio_request(GPIO_LAN9303_NRST, "nRST");
#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
+#ifdef CONFIG_NAND_CS_INIT
+/* GPMC definitions for second nand cs1 */
+static const u32 gpmc_nand_config[] = {
+ ETAMIN_NAND_GPMC_CONFIG1,
+ ETAMIN_NAND_GPMC_CONFIG2,
+ ETAMIN_NAND_GPMC_CONFIG3,
+ ETAMIN_NAND_GPMC_CONFIG4,
+ ETAMIN_NAND_GPMC_CONFIG5,
+ ETAMIN_NAND_GPMC_CONFIG6,
+ /*CONFIG7- computed as params */
+};
+
+static void board_nand_cs_init(void)
+{
+ enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[1],
+ 0x18000000, GPMC_SIZE_16M);
+}
+#endif
+
#include "../common/board.c"