#include <power/max8997_muic.h>
#include <power/battery.h>
#include <power/max17042_fg.h>
+#include <usb.h>
#include <usb_mass_storage.h>
#include "setup.h"
void i2c_init_board(void)
{
- struct exynos4_gpio_part1 *gpio1 =
- (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
+ int err;
struct exynos4_gpio_part2 *gpio2 =
(struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
/* I2C_5 -> PMIC */
- s5p_gpio_direction_output(&gpio1->b, 7, 1);
- s5p_gpio_direction_output(&gpio1->b, 6, 1);
- /* I2C_9 -> FG */
+ err = exynos_pinmux_config(PERIPH_ID_I2C5, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("I2C%d not configured\n", (I2C_5));
+ return;
+ }
+
+ /* I2C_8 -> FG */
s5p_gpio_direction_output(&gpio2->y4, 0, 1);
s5p_gpio_direction_output(&gpio2->y4, 1, 1);
}
struct power_battery *pb;
struct pmic *p_fg, *p_chrg, *p_muic, *p_bat;
+ /*
+ * For PMIC/MUIC the I2C bus is named as I2C5, but it is connected
+ * to logical I2C adapter 0
+ *
+ * The FUEL_GAUGE is marked as I2C9 on the schematic, but connected
+ * to logical I2C adapter 1
+ */
ret = pmic_init(I2C_5);
ret |= pmic_init_max8997();
ret |= power_fg_init(I2C_9);
.usb_flags = PHY0_SLEEP,
};
-void board_usb_init(void)
+int board_usb_init(int index, enum usb_init_type init)
{
debug("USB_udc_probe\n");
- s3c_udc_probe(&s5pc210_otg_data);
+ return s3c_udc_probe(&s5pc210_otg_data);
}
+
+#ifdef CONFIG_USB_CABLE_CHECK
+int usb_cable_connected(void)
+{
+ struct pmic *muic = pmic_get("MAX8997_MUIC");
+ if (!muic)
+ return 0;
+
+ return !!muic->chrg->chrg_type(muic);
+}
+#endif
#endif
static void pmic_reset(void)
setenv("lcdinfo", "lcd=s6e8ax0");
}
-
-#ifdef CONFIG_USB_GADGET_MASS_STORAGE
-static int ums_read_sector(struct ums_device *ums_dev,
- ulong start, lbaint_t blkcnt, void *buf)
-{
- if (ums_dev->mmc->block_dev.block_read(ums_dev->dev_num,
- start + ums_dev->offset, blkcnt, buf) != blkcnt)
- return -1;
-
- return 0;
-}
-
-static int ums_write_sector(struct ums_device *ums_dev,
- ulong start, lbaint_t blkcnt, const void *buf)
-{
- if (ums_dev->mmc->block_dev.block_write(ums_dev->dev_num,
- start + ums_dev->offset, blkcnt, buf) != blkcnt)
- return -1;
-
- return 0;
-}
-
-static void ums_get_capacity(struct ums_device *ums_dev,
- long long int *capacity)
-{
- long long int tmp_capacity;
-
- tmp_capacity = (long long int) ((ums_dev->offset + ums_dev->part_size)
- * SECTOR_SIZE);
- *capacity = ums_dev->mmc->capacity - tmp_capacity;
-}
-
-static struct ums_board_info ums_board = {
- .read_sector = ums_read_sector,
- .write_sector = ums_write_sector,
- .get_capacity = ums_get_capacity,
- .name = "TRATS UMS disk",
- .ums_dev = {
- .mmc = NULL,
- .dev_num = 0,
- .offset = 0,
- .part_size = 0.
- },
-};
-
-struct ums_board_info *board_ums_init(unsigned int dev_num, unsigned int offset,
- unsigned int part_size)
-{
- struct mmc *mmc;
-
- mmc = find_mmc_device(dev_num);
- if (!mmc)
- return NULL;
-
- ums_board.ums_dev.mmc = mmc;
- ums_board.ums_dev.dev_num = dev_num;
- ums_board.ums_dev.offset = offset;
- ums_board.ums_dev.part_size = part_size;
-
- return &ums_board;
-}
-#endif