#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pinmux.h>
#include <asm/arch/sromc.h>
DECLARE_GLOBAL_DATA_PTR;
-struct s5pc210_gpio_part1 *gpio1;
-struct s5pc210_gpio_part2 *gpio2;
+struct exynos4_gpio_part1 *gpio1;
+struct exynos4_gpio_part2 *gpio2;
static void smc9115_pre_init(void)
{
int board_init(void)
{
- gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
- gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+ gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
+ gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
smc9115_pre_init();
- gd->bd->bi_arch_number = MACH_TYPE_SMDKV310;
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+ gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, \
+ PHYS_SDRAM_1_SIZE);
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+ gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, \
+ PHYS_SDRAM_2_SIZE);
gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
- gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
+ gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, \
+ PHYS_SDRAM_3_SIZE);
gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
- gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
+ gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, \
+ PHYS_SDRAM_4_SIZE);
}
int board_eth_init(bd_t *bis)
return err;
}
#endif
+
+static int board_uart_init(void)
+{
+ int err;
+
+ err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART0 not configured\n");
+ return err;
+ }
+
+ err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART1 not configured\n");
+ return err;
+ }
+
+ err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART2 not configured\n");
+ return err;
+ }
+
+ err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART3 not configured\n");
+ return err;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+ int err;
+ err = board_uart_init();
+ if (err) {
+ debug("UART init failed\n");
+ return err;
+ }
+ return err;
+}
+#endif