#include <common.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
-
+#include <power/pmic.h>
+#include <usb/s3c_udc.h>
+#include <asm/arch/cpu.h>
+#include <power/max8998_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
static struct s5pc110_gpio *s5pc110_gpio;
return 0;
}
+int power_init_board(void)
+{
+ int ret;
+
+ ret = pmic_init(I2C_5);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
int dram_init(void)
{
+ gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE +
+ PHYS_SDRAM_3_SIZE;
+
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-
- return 0;
}
#ifdef CONFIG_DISPLAY_BOARDINFO
int i;
/* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */
- gpio_direction_output(&s5pc110_gpio->gpio_j2, 7, 1);
+ s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1);
/*
* MMC0 GPIO
if (i == 2)
continue;
/* GPG0[0:6] special function 2 */
- gpio_cfg_pin(&s5pc110_gpio->gpio_g0, i, 0x2);
+ s5p_gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2);
/* GPG0[0:6] pull disable */
- gpio_set_pull(&s5pc110_gpio->gpio_g0, i, GPIO_PULL_NONE);
+ s5p_gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE);
/* GPG0[0:6] drv 4x */
- gpio_set_drv(&s5pc110_gpio->gpio_g0, i, GPIO_DRV_4X);
+ s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X);
+ }
+
+ return s5p_mmc_init(0, 4);
+}
+#endif
+
+#ifdef CONFIG_USB_GADGET
+static int s5pc1xx_phy_control(int on)
+{
+ int ret;
+ static int status;
+ struct pmic *p = pmic_get("MAX8998_PMIC");
+ if (!p)
+ return -ENODEV;
+
+ if (pmic_probe(p))
+ return -1;
+
+ if (on && !status) {
+ ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
+ MAX8998_LDO3, LDO_ON);
+ ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
+ MAX8998_LDO8, LDO_ON);
+ if (ret) {
+ puts("MAX8998 LDO setting error!\n");
+ return -1;
+ }
+ status = 1;
+ } else if (!on && status) {
+ ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
+ MAX8998_LDO3, LDO_OFF);
+ ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
+ MAX8998_LDO8, LDO_OFF);
+ if (ret) {
+ puts("MAX8998 LDO setting error!\n");
+ return -1;
+ }
+ status = 0;
}
+ udelay(10000);
- return s5p_mmc_init(0);
+ return 0;
}
+
+struct s3c_plat_otg_data s5pc110_otg_data = {
+ .phy_control = s5pc1xx_phy_control,
+ .regs_phy = S5PC110_PHY_BASE,
+ .regs_otg = S5PC110_OTG_BASE,
+ .usb_phy_ctrl = S5PC110_USB_PHY_CONTROL,
+};
#endif