Merge branch 'master' of git://git.denx.de/u-boot-video
[platform/kernel/u-boot.git] / board / samsung / goni / goni.c
index 581935d..ff76963 100644 (file)
 #include <common.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
-
+#include <power/pmic.h>
+#include <usb/s3c_udc.h>
+#include <asm/arch/cpu.h>
+#include <power/max8998_pmic.h>
 DECLARE_GLOBAL_DATA_PTR;
 
 static struct s5pc110_gpio *s5pc110_gpio;
@@ -41,6 +44,17 @@ int board_init(void)
        return 0;
 }
 
+int power_init_board(void)
+{
+       int ret;
+
+       ret = pmic_init(I2C_5);
+       if (ret)
+               return ret;
+
+       return 0;
+}
+
 int dram_init(void)
 {
        gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE +
@@ -73,7 +87,7 @@ int board_mmc_init(bd_t *bis)
        int i;
 
        /* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */
-       gpio_direction_output(&s5pc110_gpio->j2, 7, 1);
+       s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1);
 
        /*
         * MMC0 GPIO
@@ -86,13 +100,59 @@ int board_mmc_init(bd_t *bis)
                if (i == 2)
                        continue;
                /* GPG0[0:6] special function 2 */
-               gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2);
+               s5p_gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2);
                /* GPG0[0:6] pull disable */
-               gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE);
+               s5p_gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE);
                /* GPG0[0:6] drv 4x */
-               gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X);
+               s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X);
        }
 
        return s5p_mmc_init(0, 4);
 }
 #endif
+
+#ifdef CONFIG_USB_GADGET
+static int s5pc1xx_phy_control(int on)
+{
+       int ret;
+       static int status;
+       struct pmic *p = pmic_get("MAX8998_PMIC");
+       if (!p)
+               return -ENODEV;
+
+       if (pmic_probe(p))
+               return -1;
+
+       if (on && !status) {
+               ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
+                                     MAX8998_LDO3, LDO_ON);
+               ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
+                                     MAX8998_LDO8, LDO_ON);
+               if (ret) {
+                       puts("MAX8998 LDO setting error!\n");
+                       return -1;
+               }
+               status = 1;
+       } else if (!on && status) {
+               ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
+                                     MAX8998_LDO3, LDO_OFF);
+               ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
+                                     MAX8998_LDO8, LDO_OFF);
+               if (ret) {
+                       puts("MAX8998 LDO setting error!\n");
+                       return -1;
+               }
+               status = 0;
+       }
+       udelay(10000);
+
+       return 0;
+}
+
+struct s3c_plat_otg_data s5pc110_otg_data = {
+       .phy_control = s5pc1xx_phy_control,
+       .regs_phy = S5PC110_PHY_BASE,
+       .regs_otg = S5PC110_OTG_BASE,
+       .usb_phy_ctrl = S5PC110_USB_PHY_CONTROL,
+};
+#endif