arm: Disable ATAGs support

[platform/kernel/u-boot.git] / board / samsung / goni / goni.c

diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index 58cf96e..ba25ba2 100644 (file)
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -1,29 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  Copyright (C) 2008-2009 Samsung Electronics
  *  Minkyu Kang <mk7.kang@samsung.com>
  *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
+#include <init.h>
+#include <log.h>
+#include <asm/global_data.h>
 #include <asm/gpio.h>
 #include <asm/arch/mmc.h>
+#include <dm.h>
+#include <linux/delay.h>
 #include <power/pmic.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
 #include <asm/arch/cpu.h>
 #include <power/max8998_pmic.h>
 #include <samsung/misc.h>
 #include <usb.h>
 #include <usb_mass_storage.h>
+#include <asm/mach-types.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-u32 get_board_rev(void)
-{
-       return 0;
-}
-
 int board_init(void)
 {
        /* Set Initial global variables */
@@ -43,21 +43,6 @@ void i2c_init_board(void)
 }
 #endif
 
-int power_init_board(void)
-{
-       int ret;
-
-       /*
-        * For PMIC the I2C bus is named as I2C5, but it is connected
-        * to logical I2C adapter 0
-        */
-       ret = pmic_init(I2C_0);
-       if (ret)
-               return ret;
-
-       return 0;
-}
-
 int dram_init(void)
 {
        gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE +
@@ -66,7 +51,7 @@ int dram_init(void)
        return 0;
 }
 
-void dram_init_banksize(void)
+int dram_init_banksize(void)
 {
        gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
        gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
@@ -74,6 +59,8 @@ void dram_init_banksize(void)
        gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
        gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
        gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
+
+       return 0;
 }
 
 #ifdef CONFIG_DISPLAY_BOARDINFO
@@ -84,8 +71,8 @@ int checkboard(void)
 }
 #endif
 
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
+#ifdef CONFIG_MMC
+int board_mmc_init(struct bd_info *bis)
 {
        int i, ret, ret_sd = 0;
 
@@ -113,7 +100,7 @@ int board_mmc_init(bd_t *bis)
 
        ret = s5p_mmc_init(0, 4);
        if (ret)
-               error("MMC: Failed to init MMC:0.\n");
+               pr_err("MMC: Failed to init MMC:0.\n");
 
        /*
         * SD card (T_FLASH) detect and init
@@ -138,7 +125,7 @@ int board_mmc_init(bd_t *bis)
 
                ret_sd = s5p_mmc_init(2, 4);
                if (ret_sd)
-                       error("MMC: Failed to init SD card (MMC:2).\n");
+                       pr_err("MMC: Failed to init SD card (MMC:2).\n");
        }
 
        return ret & ret_sd;
@@ -148,42 +135,54 @@ int board_mmc_init(bd_t *bis)
 #ifdef CONFIG_USB_GADGET
 static int s5pc1xx_phy_control(int on)
 {
-       int ret;
+       struct udevice *dev;
        static int status;
-       struct pmic *p = pmic_get("MAX8998_PMIC");
-       if (!p)
-               return -ENODEV;
+       int reg, ret;
 
-       if (pmic_probe(p))
-               return -1;
+       ret = pmic_get("max8998-pmic", &dev);
+       if (ret)
+               return ret;
 
        if (on && !status) {
-               ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
-                                     MAX8998_LDO3, LDO_ON);
-               ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
-                                     MAX8998_LDO8, LDO_ON);
+               reg = pmic_reg_read(dev, MAX8998_REG_ONOFF1);
+               reg |= MAX8998_LDO3;
+               ret = pmic_reg_write(dev, MAX8998_REG_ONOFF1, reg);
+               if (ret) {
+                       puts("MAX8998 LDO setting error!\n");
+                       return -EINVAL;
+               }
+
+               reg = pmic_reg_read(dev, MAX8998_REG_ONOFF2);
+               reg |= MAX8998_LDO8;
+               ret = pmic_reg_write(dev, MAX8998_REG_ONOFF2, reg);
                if (ret) {
                        puts("MAX8998 LDO setting error!\n");
-                       return -1;
+                       return -EINVAL;
                }
                status = 1;
        } else if (!on && status) {
-               ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
-                                     MAX8998_LDO3, LDO_OFF);
-               ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
-                                     MAX8998_LDO8, LDO_OFF);
+               reg = pmic_reg_read(dev, MAX8998_REG_ONOFF1);
+               reg &= ~MAX8998_LDO3;
+               ret = pmic_reg_write(dev, MAX8998_REG_ONOFF1, reg);
                if (ret) {
                        puts("MAX8998 LDO setting error!\n");
-                       return -1;
+                       return -EINVAL;
+               }
+
+               reg = pmic_reg_read(dev, MAX8998_REG_ONOFF2);
+               reg &= ~MAX8998_LDO8;
+               ret = pmic_reg_write(dev, MAX8998_REG_ONOFF2, reg);
+               if (ret) {
+                       puts("MAX8998 LDO setting error!\n");
+                       return -EINVAL;
                }
                status = 0;
        }
        udelay(10000);
-
        return 0;
 }
 
-struct s3c_plat_otg_data s5pc110_otg_data = {
+struct dwc2_plat_otg_data s5pc110_otg_data = {
        .phy_control = s5pc1xx_phy_control,
        .regs_phy = S5PC110_PHY_BASE,
        .regs_otg = S5PC110_OTG_BASE,
@@ -193,7 +192,7 @@ struct s3c_plat_otg_data s5pc110_otg_data = {
 int board_usb_init(int index, enum usb_init_type init)
 {
        debug("USB_udc_probe\n");
-       return s3c_udc_probe(&s5pc110_otg_data);
+       return dwc2_udc_probe(&s5pc110_otg_data);
 }
 #endif
 
@@ -206,3 +205,8 @@ int misc_init_r(void)
        return 0;
 }
 #endif
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+       return 0;
+}