/*
* (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Stelian Pop <stelian@popies.net>
* Lead Tech Design <www.leadtechdesign.com>
* Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at)
* Copyright (C) 2009 Jean-Christopher PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
-#include <asm/sizes.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91sam9261_matrix.h>
+#include <linux/sizes.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_matrix.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+
#include <lcd.h>
#include <atmel_lcdc.h>
#include <dataflash.h>
#include <net.h>
#endif
#include <netdev.h>
+#include <asm/mach-types.h>
DECLARE_GLOBAL_DATA_PTR;
static void pm9261_nand_hw_init(void)
{
unsigned long csa;
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
/* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+ csa = readl(&matrix->csa) | AT91_MATRIX_CSA_EBI_CS3A;
+ writel(csa, &matrix->csa);
/* Configure SMC CS3 for NAND/SmartMedia */
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+ &smc->cs[3].cycle);
+
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
+ AT91_SMC_MODE_DBW_16 |
#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
+ AT91_SMC_MODE_DBW_8 |
#endif
- AT91_SMC_TDF_(2));
+ AT91_SMC_MODE_TDF_CYCLE(2),
+ &smc->cs[3].mode);
+
+ at91_periph_clk_enable(ATMEL_ID_PIOA);
+ at91_periph_clk_enable(ATMEL_ID_PIOC);
/* Configure RDY/BSY */
- at91_set_gpio_input(AT91_PIN_PA16, 1);
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
/* Enable NandFlash */
- at91_set_gpio_output(AT91_PIN_PC14, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
- at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */
- at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */
+ at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* NANDOE */
+ at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* NANDWE */
}
#endif
#ifdef CONFIG_DRIVER_DM9000
static void pm9261_dm9000_hw_init(void)
{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+
/* Configure SMC CS2 for DM9000 */
- at91_sys_write(AT91_SMC_SETUP(2),
- AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(2),
- AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) |
- AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
- at91_sys_write(AT91_SMC_CYCLE(2),
- AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
- at91_sys_write(AT91_SMC_MODE(2),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
- AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
- AT91_SMC_TDF_(1));
+ writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[2].setup);
+
+ writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(8) |
+ AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(8),
+ &smc->cs[2].pulse);
+
+ writel(AT91_SMC_CYCLE_NWE(16) | AT91_SMC_CYCLE_NRD(16),
+ &smc->cs[2].cycle);
+
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_BAT | AT91_SMC_MODE_DBW_16 |
+ AT91_SMC_MODE_TDF_CYCLE(1),
+ &smc->cs[2].mode);
/* Configure Interrupt pin as input, no pull-up */
- at91_set_gpio_input(AT91_PIN_PA24, 0);
+ at91_periph_clk_enable(ATMEL_ID_PIOA);
+ at91_set_pio_input(AT91_PIO_PORTA, 24, 0);
}
#endif
#ifdef CONFIG_LCD
vidinfo_t panel_info = {
- vl_col: 240,
- vl_row: 320,
- vl_clk: 4965000,
- vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
- ATMEL_LCDC_INVFRAME_INVERTED,
- vl_bpix: 3,
- vl_tft: 1,
- vl_hsync_len: 5,
- vl_left_margin: 1,
- vl_right_margin:33,
- vl_vsync_len: 1,
- vl_upper_margin:1,
- vl_lower_margin:0,
- mmio: AT91SAM9261_LCDC_BASE,
+ .vl_col = 240,
+ .vl_row = 320,
+ .vl_clk = 4965000,
+ .vl_sync = ATMEL_LCDC_INVLINE_INVERTED |
+ ATMEL_LCDC_INVFRAME_INVERTED,
+ .vl_bpix = 3,
+ .vl_tft = 1,
+ .vl_hsync_len = 5,
+ .vl_left_margin = 1,
+ .vl_right_margin = 33,
+ .vl_vsync_len = 1,
+ .vl_upper_margin = 1,
+ .vl_lower_margin = 0,
+ .mmio = ATMEL_BASE_LCDC,
};
void lcd_enable(void)
{
- at91_set_gpio_value(AT91_PIN_PA22, 0); /* power up */
+ at91_set_pio_value(AT91_PIO_PORTA, 22, 0); /* power up */
}
void lcd_disable(void)
{
- at91_set_gpio_value(AT91_PIN_PA22, 1); /* power down */
+ at91_set_pio_value(AT91_PIO_PORTA, 22, 1); /* power down */
}
static void pm9261_lcd_hw_init(void)
{
- at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
- at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */
- at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */
- at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */
- at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */
- at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
- at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
- at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
-
- at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
-
- gd->fb_base = AT91SAM9261_SRAM_BASE;
+ at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* LCDHSYNC */
+ at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* LCDDOTCK */
+ at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* LCDDEN */
+ at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* LCDCC */
+ at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* LCDD2 */
+ at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* LCDD3 */
+ at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* LCDD4 */
+ at91_set_a_periph(AT91_PIO_PORTB, 10, 0); /* LCDD5 */
+ at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* LCDD6 */
+ at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* LCDD7 */
+ at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* LCDD10 */
+ at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* LCDD11 */
+ at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* LCDD12 */
+ at91_set_a_periph(AT91_PIO_PORTB, 18, 0); /* LCDD13 */
+ at91_set_a_periph(AT91_PIO_PORTB, 19, 0); /* LCDD14 */
+ at91_set_a_periph(AT91_PIO_PORTB, 20, 0); /* LCDD15 */
+ at91_set_b_periph(AT91_PIO_PORTB, 23, 0); /* LCDD18 */
+ at91_set_b_periph(AT91_PIO_PORTB, 24, 0); /* LCDD19 */
+ at91_set_b_periph(AT91_PIO_PORTB, 25, 0); /* LCDD20 */
+ at91_set_b_periph(AT91_PIO_PORTB, 26, 0); /* LCDD21 */
+ at91_set_b_periph(AT91_PIO_PORTB, 27, 0); /* LCDD22 */
+ at91_set_b_periph(AT91_PIO_PORTB, 28, 0); /* LCDD23 */
+
+ at91_system_clk_enable(AT91_PMC_HCK1);
+
+ gd->fb_base = ATMEL_BASE_SRAM;
}
#ifdef CONFIG_LCD_INFO
nand_size = 0;
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += nand_info[i].size;
+ nand_size += nand_info[i]->size;
flash_size = 0;
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
#endif /* CONFIG_LCD */
-int board_init(void)
+int board_early_init_f(void)
{
- /* Enable Ctrlc */
- console_init_f();
+ at91_periph_clk_enable(ATMEL_ID_PIOA);
+ at91_periph_clk_enable(ATMEL_ID_PIOC);
+
+ at91_seriald_hw_init();
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA);
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC);
+ return 0;
+}
+int board_init(void)
+{
/* arch number of PM9261-Board */
gd->bd->bi_arch_number = MACH_TYPE_PM9261;
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- at91_serial_hw_init();
#ifdef CONFIG_CMD_NAND
pm9261_nand_hw_init();
#endif
int dram_init(void)
{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((void *)PHYS_SDRAM,
+ PHYS_SDRAM_SIZE);
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
gd->bd->bi_dram[0].start = PHYS_SDRAM;
gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+
return 0;
}
* Initialize ethernet HW addr prior to starting Linux,
* needed for nfsroot
*/
- eth_init(gd->bd);
+ eth_init();
#endif
}
#endif