+// SPDX-License-Identifier: GPL-2.0
/*
* (C) Copyright 2012-2016 Stephen Warren
- *
- * SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
-#include <inttypes.h>
#include <config.h>
#include <dm.h>
+#include <environment.h>
+#include <efi_loader.h>
#include <fdt_support.h>
#include <fdt_simplefb.h>
#include <lcd.h>
#include <mmc.h>
#include <asm/gpio.h>
#include <asm/arch/mbox.h>
+#include <asm/arch/msg.h>
#include <asm/arch/sdhci.h>
#include <asm/global_data.h>
-#include <dm/platform_data/serial_pl01x.h>
#include <dm/platform_data/serial_bcm283x_mu.h>
#ifdef CONFIG_ARM64
#include <asm/armv8/mmu.h>
#endif
+#include <watchdog.h>
+#include <dm/pinctrl.h>
DECLARE_GLOBAL_DATA_PTR;
-static const struct bcm2835_gpio_platdata gpio_platdata = {
- .base = BCM2835_GPIO_BASE,
-};
-
-U_BOOT_DEVICE(bcm2835_gpios) = {
- .name = "gpio_bcm2835",
- .platdata = &gpio_platdata,
-};
-
-#ifdef CONFIG_PL01X_SERIAL
-static const struct pl01x_serial_platdata serial_platdata = {
-#ifndef CONFIG_BCM2835
- .base = 0x3f201000,
-#else
- .base = 0x20201000,
-#endif
- .type = TYPE_PL011,
- .skip_init = true,
-};
-
-U_BOOT_DEVICE(bcm2835_serials) = {
- .name = "serial_pl01x",
- .platdata = &serial_platdata,
-};
-#else
-static const struct bcm283x_mu_serial_platdata serial_platdata = {
- .base = 0x3f215040,
- .clock = 250000000,
- .skip_init = true,
-};
-
-U_BOOT_DEVICE(bcm2837_serials) = {
- .name = "serial_bcm283x_mu",
- .platdata = &serial_platdata,
-};
-#endif
+/* From lowlevel_init.S */
+extern unsigned long fw_dtb_pointer;
+/* TODO(sjg@chromium.org): Move these to the msg.c file */
struct msg_get_arm_mem {
struct bcm2835_mbox_hdr hdr;
struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
u32 end_tag;
};
-struct msg_set_power_state {
- struct bcm2835_mbox_hdr hdr;
- struct bcm2835_mbox_tag_set_power_state set_power_state;
- u32 end_tag;
-};
-
struct msg_get_clock_rate {
struct bcm2835_mbox_hdr hdr;
struct bcm2835_mbox_tag_get_clock_rate get_clock_rate;
u32 end_tag;
};
+#ifdef CONFIG_ARM64
+#define DTB_DIR "broadcom/"
+#else
+#define DTB_DIR ""
+#endif
+
/*
- * http://raspberryalphaomega.org.uk/2013/02/06/automatic-raspberry-pi-board-revision-detection-model-a-b1-and-b2/
- * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=32733
- * http://git.drogon.net/?p=wiringPi;a=blob;f=wiringPi/wiringPi.c;h=503151f61014418b9c42f4476a6086f75cd4e64b;hb=refs/heads/master#l922
- *
- * In http://lists.denx.de/pipermail/u-boot/2016-January/243752.html
- * ("[U-Boot] [PATCH] rpi: fix up Model B entries") Dom Cobley at the RPi
- * Foundation stated that the following source was accurate:
- * https://github.com/AndrewFromMelbourne/raspberry_pi_revision
+ * https://www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md
*/
struct rpi_model {
const char *name;
static const struct rpi_model rpi_model_unknown = {
"Unknown model",
- "bcm283x-rpi-other.dtb",
+ DTB_DIR "bcm283x-rpi-other.dtb",
false,
};
static const struct rpi_model rpi_models_new_scheme[] = {
+ [0x0] = {
+ "Model A",
+ DTB_DIR "bcm2835-rpi-a.dtb",
+ false,
+ },
+ [0x1] = {
+ "Model B",
+ DTB_DIR "bcm2835-rpi-b.dtb",
+ true,
+ },
+ [0x2] = {
+ "Model A+",
+ DTB_DIR "bcm2835-rpi-a-plus.dtb",
+ false,
+ },
+ [0x3] = {
+ "Model B+",
+ DTB_DIR "bcm2835-rpi-b-plus.dtb",
+ true,
+ },
[0x4] = {
"2 Model B",
- "bcm2836-rpi-2-b.dtb",
+ DTB_DIR "bcm2836-rpi-2-b.dtb",
true,
},
+ [0x6] = {
+ "Compute Module",
+ DTB_DIR "bcm2835-rpi-cm.dtb",
+ false,
+ },
[0x8] = {
"3 Model B",
- "bcm2837-rpi-3-b.dtb",
+ DTB_DIR "bcm2837-rpi-3-b.dtb",
true,
},
[0x9] = {
"Zero",
- "bcm2835-rpi-zero.dtb",
+ DTB_DIR "bcm2835-rpi-zero.dtb",
+ false,
+ },
+ [0xA] = {
+ "Compute Module 3",
+ DTB_DIR "bcm2837-rpi-cm3.dtb",
+ false,
+ },
+ [0xC] = {
+ "Zero W",
+ DTB_DIR "bcm2835-rpi-zero-w.dtb",
+ false,
+ },
+ [0xD] = {
+ "3 Model B+",
+ DTB_DIR "bcm2837-rpi-3-b-plus.dtb",
+ true,
+ },
+ [0xE] = {
+ "3 Model A+",
+ DTB_DIR "bcm2837-rpi-3-a-plus.dtb",
false,
},
};
static const struct rpi_model rpi_models_old_scheme[] = {
[0x2] = {
"Model B",
- "bcm2835-rpi-b.dtb",
+ DTB_DIR "bcm2835-rpi-b.dtb",
true,
},
[0x3] = {
"Model B",
- "bcm2835-rpi-b.dtb",
+ DTB_DIR "bcm2835-rpi-b.dtb",
true,
},
[0x4] = {
"Model B rev2",
- "bcm2835-rpi-b-rev2.dtb",
+ DTB_DIR "bcm2835-rpi-b-rev2.dtb",
true,
},
[0x5] = {
"Model B rev2",
- "bcm2835-rpi-b-rev2.dtb",
+ DTB_DIR "bcm2835-rpi-b-rev2.dtb",
true,
},
[0x6] = {
"Model B rev2",
- "bcm2835-rpi-b-rev2.dtb",
+ DTB_DIR "bcm2835-rpi-b-rev2.dtb",
true,
},
[0x7] = {
"Model A",
- "bcm2835-rpi-a.dtb",
+ DTB_DIR "bcm2835-rpi-a.dtb",
false,
},
[0x8] = {
"Model A",
- "bcm2835-rpi-a.dtb",
+ DTB_DIR "bcm2835-rpi-a.dtb",
false,
},
[0x9] = {
"Model A",
- "bcm2835-rpi-a.dtb",
+ DTB_DIR "bcm2835-rpi-a.dtb",
false,
},
[0xd] = {
"Model B rev2",
- "bcm2835-rpi-b-rev2.dtb",
+ DTB_DIR "bcm2835-rpi-b-rev2.dtb",
true,
},
[0xe] = {
"Model B rev2",
- "bcm2835-rpi-b-rev2.dtb",
+ DTB_DIR "bcm2835-rpi-b-rev2.dtb",
true,
},
[0xf] = {
"Model B rev2",
- "bcm2835-rpi-b-rev2.dtb",
+ DTB_DIR "bcm2835-rpi-b-rev2.dtb",
true,
},
[0x10] = {
"Model B+",
- "bcm2835-rpi-b-plus.dtb",
+ DTB_DIR "bcm2835-rpi-b-plus.dtb",
true,
},
[0x11] = {
"Compute Module",
- "bcm2835-rpi-cm.dtb",
+ DTB_DIR "bcm2835-rpi-cm.dtb",
false,
},
[0x12] = {
"Model A+",
- "bcm2835-rpi-a-plus.dtb",
+ DTB_DIR "bcm2835-rpi-a-plus.dtb",
false,
},
[0x13] = {
"Model B+",
- "bcm2835-rpi-b-plus.dtb",
+ DTB_DIR "bcm2835-rpi-b-plus.dtb",
true,
},
[0x14] = {
"Compute Module",
- "bcm2835-rpi-cm.dtb",
+ DTB_DIR "bcm2835-rpi-cm.dtb",
false,
},
[0x15] = {
"Model A+",
- "bcm2835-rpi-a-plus.dtb",
+ DTB_DIR "bcm2835-rpi-a-plus.dtb",
false,
},
};
{
const char *fdtfile;
- if (getenv("fdtfile"))
+ if (env_get("fdtfile"))
return;
fdtfile = model->fdtfile;
- setenv("fdtfile", fdtfile);
+ env_set("fdtfile", fdtfile);
+}
+
+/*
+ * If the firmware provided a valid FDT at boot time, let's expose it in
+ * ${fdt_addr} so it may be passed unmodified to the kernel.
+ */
+static void set_fdt_addr(void)
+{
+ if (env_get("fdt_addr"))
+ return;
+
+ if (fdt_magic(fw_dtb_pointer) != FDT_MAGIC)
+ return;
+
+ env_set_hex("fdt_addr", fw_dtb_pointer);
+}
+
+/*
+ * Prevent relocation from stomping on a firmware provided FDT blob.
+ */
+unsigned long board_get_usable_ram_top(unsigned long total_size)
+{
+ if ((gd->ram_top - fw_dtb_pointer) > SZ_64M)
+ return gd->ram_top;
+ return fw_dtb_pointer & ~0xffff;
}
static void set_usbethaddr(void)
if (!model->has_onboard_eth)
return;
- if (getenv("usbethaddr"))
+ if (env_get("usbethaddr"))
return;
BCM2835_MBOX_INIT_HDR(msg);
return;
}
- eth_setenv_enetaddr("usbethaddr", msg->get_mac_address.body.resp.mac);
+ eth_env_set_enetaddr("usbethaddr", msg->get_mac_address.body.resp.mac);
- if (!getenv("ethaddr"))
- setenv("ethaddr", getenv("usbethaddr"));
+ if (!env_get("ethaddr"))
+ env_set("ethaddr", env_get("usbethaddr"));
return;
}
char s[11];
snprintf(s, sizeof(s), "0x%X", revision);
- setenv("board_revision", s);
+ env_set("board_revision", s);
snprintf(s, sizeof(s), "%d", rev_scheme);
- setenv("board_rev_scheme", s);
+ env_set("board_rev_scheme", s);
/* Can't rename this to board_rev_type since it's an ABI for scripts */
snprintf(s, sizeof(s), "0x%X", rev_type);
- setenv("board_rev", s);
- setenv("board_name", model->name);
+ env_set("board_rev", s);
+ env_set("board_name", model->name);
}
#endif /* CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG */
int ret;
char serial_string[17] = { 0 };
- if (getenv("serial#"))
+ if (env_get("serial#"))
return;
BCM2835_MBOX_INIT_HDR(msg);
return;
}
- snprintf(serial_string, sizeof(serial_string), "%016" PRIx64,
+ snprintf(serial_string, sizeof(serial_string), "%016llx",
msg->get_board_serial.body.resp.serial);
- setenv("serial#", serial_string);
+ env_set("serial#", serial_string);
}
int misc_init_r(void)
{
+ set_fdt_addr();
set_fdtfile();
set_usbethaddr();
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
return 0;
}
-static int power_on_module(u32 module)
-{
- ALLOC_CACHE_ALIGN_BUFFER(struct msg_set_power_state, msg_pwr, 1);
- int ret;
-
- BCM2835_MBOX_INIT_HDR(msg_pwr);
- BCM2835_MBOX_INIT_TAG(&msg_pwr->set_power_state,
- SET_POWER_STATE);
- msg_pwr->set_power_state.body.req.device_id = module;
- msg_pwr->set_power_state.body.req.state =
- BCM2835_MBOX_SET_POWER_STATE_REQ_ON |
- BCM2835_MBOX_SET_POWER_STATE_REQ_WAIT;
-
- ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN,
- &msg_pwr->hdr);
- if (ret) {
- printf("bcm2835: Could not set module %u power state\n",
- module);
- return -1;
- }
-
- return 0;
-}
-
static void get_board_rev(void)
{
ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_board_rev, msg, 1);
int board_init(void)
{
+#ifdef CONFIG_HW_WATCHDOG
+ hw_watchdog_init();
+#endif
+
get_board_rev();
gd->bd->bi_boot_params = 0x100;
- return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD);
+ return bcm2835_power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD);
}
-int board_mmc_init(bd_t *bis)
+/*
+ * If the firmware passed a device tree use it for U-Boot.
+ */
+void *board_fdt_blob_setup(void)
{
- ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_clock_rate, msg_clk, 1);
- int ret;
-
- power_on_module(BCM2835_MBOX_POWER_DEVID_SDHCI);
-
- BCM2835_MBOX_INIT_HDR(msg_clk);
- BCM2835_MBOX_INIT_TAG(&msg_clk->get_clock_rate, GET_CLOCK_RATE);
- msg_clk->get_clock_rate.body.req.clock_id = BCM2835_MBOX_CLOCK_ID_EMMC;
-
- ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_clk->hdr);
- if (ret) {
- printf("bcm2835: Could not query eMMC clock rate\n");
- return -1;
- }
-
- return bcm2835_sdhci_init(BCM2835_SDHCI_BASE,
- msg_clk->get_clock_rate.body.resp.rate_hz);
+ if (fdt_magic(fw_dtb_pointer) != FDT_MAGIC)
+ return NULL;
+ return (void *)fw_dtb_pointer;
}
int ft_board_setup(void *blob, bd_t *bd)
*/
lcd_dt_simplefb_add_node(blob);
+#ifdef CONFIG_EFI_LOADER
+ /* Reserve the spin table */
+ efi_add_memory_map(0, 1, EFI_RESERVED_MEMORY_TYPE, 0);
+#endif
+
return 0;
}