Merge branch 'master' of git://git.denx.de/u-boot-arm

[platform/kernel/u-boot.git] / board / phytec / pcm051 / board.c

diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c
index 6a27e56..7e5e07f 100644 (file)
--- a/board/phytec/pcm051/board.c
+++ b/board/phytec/pcm051/board.c
@@ -50,6 +50,14 @@ const struct dpll_params *get_dpll_ddr_params(void)
 }
 
 #ifdef CONFIG_REV1
+const struct ctrl_ioregs ioregs = {
+       .cm0ioctl               = MT41J256M8HX15E_IOCTRL_VALUE,
+       .cm1ioctl               = MT41J256M8HX15E_IOCTRL_VALUE,
+       .cm2ioctl               = MT41J256M8HX15E_IOCTRL_VALUE,
+       .dt0ioctl               = MT41J256M8HX15E_IOCTRL_VALUE,
+       .dt1ioctl               = MT41J256M8HX15E_IOCTRL_VALUE,
+};
+
 static const struct ddr_data ddr3_data = {
        .datardsratio0 = MT41J256M8HX15E_RD_DQS,
        .datawdsratio0 = MT41J256M8HX15E_WR_DQS,
@@ -81,10 +89,18 @@ static struct emif_regs ddr3_emif_reg_data = {
 
 void sdram_init(void)
 {
-       config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data,
+       config_ddr(DDR_CLK_MHZ, &ioregs, &ddr3_data,
                   &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
 }
 #else
+const struct ctrl_ioregs ioregs = {
+       .cm0ioctl               = MT41K256M16HA125E_IOCTRL_VALUE,
+       .cm1ioctl               = MT41K256M16HA125E_IOCTRL_VALUE,
+       .cm2ioctl               = MT41K256M16HA125E_IOCTRL_VALUE,
+       .dt0ioctl               = MT41K256M16HA125E_IOCTRL_VALUE,
+       .dt1ioctl               = MT41K256M16HA125E_IOCTRL_VALUE,
+};
+
 static const struct ddr_data ddr3_data = {
        .datardsratio0 = MT41K256M16HA125E_RD_DQS,
        .datawdsratio0 = MT41K256M16HA125E_WR_DQS,
@@ -116,7 +132,7 @@ static struct emif_regs ddr3_emif_reg_data = {
 
 void sdram_init(void)
 {
-       config_ddr(DDR_CLK_MHZ, MT41K256M16HA125E_IOCTRL_VALUE, &ddr3_data,
+       config_ddr(DDR_CLK_MHZ, &ioregs, &ddr3_data,
                   &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
 }
 #endif
@@ -130,7 +146,7 @@ void set_mux_conf_regs(void)
 {
        /* Initalize the board header */
        enable_i2c0_pin_mux();
-       i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+       i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 
        enable_board_pin_mux();
 }
@@ -141,7 +157,7 @@ void set_mux_conf_regs(void)
  */
 int board_init(void)
 {
-       i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+       i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 
        gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;