mmc: move more driver config options to Kconfig

[platform/kernel/u-boot.git] / board / nvidia / dalmore / dalmore.c

diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c
index 2c23a29..cb9282e 100644 (file)
--- a/board/nvidia/dalmore/dalmore.c
+++ b/board/nvidia/dalmore/dalmore.c
@@ -1,20 +1,11 @@
 /*
  * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * SPDX-License-Identifier:    GPL-2.0
  */
 
 #include <common.h>
+#include <dm.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/gp_padctrl.h>
 #include "pinmux-config-dalmore.h"
@@ -29,38 +20,42 @@
  */
 void pinmux_init(void)
 {
-       pinmux_config_table(tegra114_pinmux_set_nontristate,
+       pinmux_config_pingrp_table(tegra114_pinmux_set_nontristate,
                ARRAY_SIZE(tegra114_pinmux_set_nontristate));
 
-       pinmux_config_table(tegra114_pinmux_common,
+       pinmux_config_pingrp_table(tegra114_pinmux_common,
                ARRAY_SIZE(tegra114_pinmux_common));
 
-       pinmux_config_table(unused_pins_lowpower,
+       pinmux_config_pingrp_table(unused_pins_lowpower,
                ARRAY_SIZE(unused_pins_lowpower));
 
        /* Initialize any non-default pad configs (APB_MISC_GP regs) */
-       padgrp_config_table(dalmore_padctrl, ARRAY_SIZE(dalmore_padctrl));
+       pinmux_config_drvgrp_table(dalmore_padctrl,
+               ARRAY_SIZE(dalmore_padctrl));
 }
 
-#if defined(CONFIG_TEGRA_MMC)
+#if defined(CONFIG_MMC_SDHCI_TEGRA)
 /*
  * Do I2C/PMU writes to bring up SD card bus power
  *
  */
 void board_sdmmc_voltage_init(void)
 {
+       struct udevice *dev;
        uchar reg, data_buffer[1];
        int ret;
 
-       ret = i2c_set_bus_num(0);/* PMU is on bus 0 */
-       if (ret)
-               printf("%s: i2c_set_bus_num returned %d\n", __func__, ret);
+       ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, 1, &dev);
+       if (ret) {
+               debug("%s: Cannot find PMIC I2C chip\n", __func__);
+               return;
+       }
 
        /* TPS65913: LDO9_VOLTAGE = 3.3V */
        data_buffer[0] = 0x31;
        reg = 0x61;
 
-       ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1);
+       ret = dm_i2c_write(dev, reg, data_buffer, 1);
        if (ret)
                printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
                        __func__, reg, data_buffer[0], ret);
@@ -69,7 +64,7 @@ void board_sdmmc_voltage_init(void)
        data_buffer[0] = 0x01;
        reg = 0x60;
 
-       ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1);
+       ret = dm_i2c_write(dev, reg, data_buffer, 1);
        if (ret)
                printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
                        __func__, reg, data_buffer[0], ret);
@@ -78,7 +73,12 @@ void board_sdmmc_voltage_init(void)
        data_buffer[0] = 0x03;
        reg = 0x14;
 
-       ret = i2c_write(BAT_I2C_ADDRESS, reg, 1, data_buffer, 1);
+       ret = i2c_get_chip_for_busnum(0, BAT_I2C_ADDRESS, 1, &dev);
+       if (ret) {
+               debug("%s: Cannot find charger I2C chip\n", __func__);
+               return;
+       }
+       ret = dm_i2c_write(dev, reg, data_buffer, 1);
        if (ret)
                printf("%s: BAT i2c_write %02X<-%02X returned %d\n",
                        __func__, reg, data_buffer[0], ret);