#include "pip405.h"
#include <asm/processor.h>
#include <i2c.h>
+#include <stdio_dev.h>
#include "../common/isa.h"
#include "../common/common_util.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#undef SDRAM_DEBUG
#define FALSE 0
void SDRAM_err (const char *s)
{
#ifndef SDRAM_DEBUG
- DECLARE_GLOBAL_DATA_PTR;
-
(void) get_clocks ();
gd->baudrate = 9600;
serial_init ();
trc_clocks, tctp_clocks;
unsigned char cal_index, cal_val, spd_version, spd_chksum;
unsigned char buf[8];
-#ifdef SDRAM_DEBUG
- DECLARE_GLOBAL_DATA_PTR;
-#endif
/* set up the config port */
mtdcr (ebccfga, pb7ap);
mtdcr (ebccfgd, CONFIG_PORT_AP);
#endif
/* Read Serial Presence Detect Information */
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
dataout[0] = 0;
for (i = 0; i < 128; i++)
datain[i] = 127;
(datain[2] != 0x04) || /* if not SDRAM */
(!((datain[6] == 0x40) || (datain[6] == 0x48))) || /* or not (64 Bit or 72 Bit) */
(datain[7] != 0x00) || (datain[8] != 0x01) || /* or not LVTTL signal levels */
- (datain[126] == 0x66)) /* or a 66Mhz modules */
+ (datain[126] == 0x66)) /* or a 66MHz modules */
SDRAM_err ("unsupported SDRAM");
#ifdef SDRAM_DEBUG
serial_puts ("SDRAM sanity ok\n");
/* write SDRAM timing register */
mtdcr (memcfga, mem_sdtr1);
mtdcr (memcfgd, tmp);
- baseaddr = CFG_SDRAM_BASE;
+ baseaddr = CONFIG_SYS_SDRAM_BASE;
bank_size = (((unsigned long) density) << 22) / 2;
/* insert AM value */
tmp = ((unsigned long) t->mode - 1) << 13;
/* ------------------------------------------------------------------------- */
static int test_dram (unsigned long ramsize);
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned long bank_reg[4], tmp, bank_size;
int i, ds;
unsigned long TotalSize;
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
/* adjust flash start and size as well as the offset */
gd->bd->bi_flashstart=0-flash_info[0].size;
- gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN;
+ gd->bd->bi_flashsize=flash_info[0].size-CONFIG_SYS_MONITOR_LEN;
gd->bd->bi_flashoffset=0;
/* if PIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
{
print_pip405_rev ();
isa_init ();
- show_stdio_dev ();
+ stdio_print_current_devices ();
check_env();
return 0;
}