odroid: remove CONFIG_DM_I2C_COMPAT config

[platform/kernel/u-boot.git] / board / mpl / pati / pati.c

diff --git a/board/mpl/pati/pati.c b/board/mpl/pati/pati.c
index 85c5af9..1288f74 100644 (file)
--- a/board/mpl/pati/pati.c
+++ b/board/mpl/pati/pati.c
@@ -3,23 +3,7 @@
  * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
  * Atapted for PATI
  * Denis Peter, d.peter@mpl.ch
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /***********************************************************************************
@@ -45,8 +29,9 @@
  **********************************************************************************/
 
 #include <common.h>
+#include <console.h>
 #include <mpc5xx.h>
-#include <devices.h>
+#include <stdio_dev.h>
 #include <pci_ids.h>
 #define PLX9056_LOC
 #include "plx9056.h"
@@ -70,6 +55,8 @@
                asm (GEN_SYMNAME(name) " = " GEN_VALUE(value))
 
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /************************************************************************
  * Early debug routines
  */
@@ -144,12 +131,11 @@ const sdram_t sdram_table[] = {
 
 
 extern int mem_test (unsigned long start, unsigned long ramsize, int quiet);
-extern void mem_test_reloc(void);
 
 /*
  * Get RAM size.
  */
-phys_size_t initdram(int board_type)
+int dram_init(void)
 {
        unsigned char board_rev;
        unsigned long reg;
@@ -225,8 +211,10 @@ phys_size_t initdram(int board_type)
        /* we have a x32 bit bus to the SDRAM, so shift the addr with 2 */
        lmr<<=2;
        in32(CONFIG_SYS_SDRAM_BASE + lmr);
-       /* ok, we're done, return SDRAM size */
-       return ((0x400000 << sdram_table[i].sz));               /* log2 value of 4MByte  */
+       /* ok, we're done, set SDRAM size to log2 value of 4MByte*/
+       gd->ram_size = 0x400000 << sdram_table[i].sz;
+
+       return 0;
 }
 
 
@@ -328,13 +316,17 @@ void user_led1(int led_on)
        sysconf->sc_sgpiodt2=reg; /* Data register */
 }
 
+int board_early_init_f(void)
+{
+       spi_init_f();
+       return 0;
+}
 
 /****************************************************************
  * Last Stage Init
  ****************************************************************/
 int last_stage_init (void)
 {
-       mem_test_reloc();
        init_ios();
        return 0;
 }
@@ -347,15 +339,15 @@ int last_stage_init (void)
 
 int checkboard (void)
 {
-       unsigned char s[50];
-       unsigned long reg;
+       char s[50];
+       ulong reg;
        char rev;
        int i;
 
        puts ("\nBoard: ");
        reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
        rev=(char)(SYSCNTR_BREV(reg)+'A');
-       i = getenv_r ("serial#", s, 32);
+       i = getenv_f("serial#", s, 32);
        if ((i == -1)) {
                puts ("### No HW ID - assuming " BOARD_NAME);
                printf(" Rev. %c\n",rev);
@@ -447,7 +439,7 @@ int checkboard (void)
 int recbuf[REC_BUFFER_SIZE];
 static int r_ptr = 0;
 int w_ptr;
-device_t pci_con_dev;
+struct stdio_dev pci_con_dev;
 int conn=0;
 int buff_full=0;
 
@@ -463,7 +455,7 @@ void pci_con_put_it(const char c)
        PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_CON_DATA);
 }
 
-void pci_con_putc(const char c)
+void pci_con_putc(struct stdio_dev *dev, const char c)
 {
        pci_con_put_it(c);
        if(c == '\n')
@@ -471,7 +463,7 @@ void pci_con_putc(const char c)
 }
 
 
-int pci_con_getc(void)
+int pci_con_getc(struct stdio_dev *dev)
 {
        int res;
        int diff;
@@ -491,14 +483,14 @@ int pci_con_getc(void)
        return res;
 }
 
-int pci_con_tstc(void)
+int pci_con_tstc(struct stdio_dev *dev)
 {
        if(r_ptr==(volatile int)w_ptr)
                return 0;
        return 1;
 }
 
-void pci_con_puts (const char *s)
+void pci_con_puts(struct stdio_dev *dev, const char *s)
 {
        while (*s) {
                pci_con_putc(*s);
@@ -579,12 +571,12 @@ void pci_con_connect(void)
        irq_install_handler (0x2, (interrupt_handler_t *) pci_dorbell_irq,NULL);
        memset (&pci_con_dev, 0, sizeof (pci_con_dev));
        strcpy (pci_con_dev.name, "pci_con");
-       pci_con_dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
+       pci_con_dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT;
        pci_con_dev.putc = pci_con_putc;
        pci_con_dev.puts = pci_con_puts;
        pci_con_dev.getc = pci_con_getc;
        pci_con_dev.tstc = pci_con_tstc;
-       device_register (&pci_con_dev);
+       stdio_register (&pci_con_dev);
        printf("PATI ready for PCI connection, type ctrl-c for exit\n");
        do {
                udelay(10);