#include <i2c.h>
#include <spd.h>
#include <miiphy.h>
-#include <command.h>
#if defined(CONFIG_SPD_EEPROM)
#include <spd_sdram.h>
#endif
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
int fixed_sdram(void);
void sdram_init(void);
long int initdram (int board_type)
{
- volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
u32 msize = 0;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
************************************************************************/
int fixed_sdram(void)
{
- volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
u32 msize = 0;
u32 ddr_size;
u32 ddr_size_log2;
#if (CFG_DDR_SIZE != 256)
#warning Currenly any ddr size other than 256 is not supported
#endif
+#ifdef CONFIG_DDR_II
+ im->ddr.csbnds[2].csbnds = CFG_DDR_CS2_BNDS;
+ im->ddr.cs_config[2] = CFG_DDR_CS2_CONFIG;
+ im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
+ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+ im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
+ im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
+ im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
+ im->ddr.sdram_mode = CFG_DDR_MODE;
+ im->ddr.sdram_mode2 = CFG_DDR_MODE2;
+ im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+ im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
+#else
im->ddr.csbnds[2].csbnds = 0x0000000f;
im->ddr.cs_config[2] = CFG_DDR_CONFIG;
im->ddr.sdram_mode = CFG_DDR_MODE;
im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+#endif
udelay(200);
/* enable DDR controller */
void sdram_init(void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile lbus8349_t *lbc= &immap->lbus;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile lbus83xx_t *lbc= &immap->lbus;
uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
puts("\n SDRAM on Local Bus: ");
#else
void sdram_init(void)
{
- put("SDRAM on Local Bus is NOT available!\n");
+ puts(" SDRAM on Local Bus is NOT available!\n");
}
#endif
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-/*
- * ECC user commands
- */
-void ecc_print_status(void)
-{
- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile ddr8349_t *ddr = &immap->ddr;
-
- printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
- /* Interrupts */
- printf("Memory Error Interrupt Enable:\n");
- printf(" Multiple-Bit Error Interrupt Enable: %d\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
- printf(" Single-Bit Error Interrupt Enable: %d\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
- printf(" Memory Select Error Interrupt Enable: %d\n\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
- /* Error disable */
- printf("Memory Error Disable:\n");
- printf(" Multiple-Bit Error Disable: %d\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
- printf(" Sinle-Bit Error Disable: %d\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
- printf(" Memory Select Error Disable: %d\n\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
- /* Error injection */
- printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
- ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
- printf("Memory Data Path Error Injection Mask ECC:\n");
- printf(" ECC Mirror Byte: %d\n",
- (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
- printf(" ECC Injection Enable: %d\n",
- (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
- printf(" ECC Error Injection Mask: 0x%02x\n\n",
- ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
- /* SBE counter/threshold */
- printf("Memory Single-Bit Error Management (0..255):\n");
- printf(" Single-Bit Error Threshold: %d\n",
- (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
- printf(" Single-Bit Error Counter: %d\n\n",
- (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
- /* Error detect */
- printf("Memory Error Detect:\n");
- printf(" Multiple Memory Errors: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
- printf(" Multiple-Bit Error: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
- printf(" Single-Bit Error: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
- printf(" Memory Select Error: %d\n\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
- /* Capture data */
- printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
- printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
- ddr->capture_data_hi, ddr->capture_data_lo);
- printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
- ddr->capture_ecc & CAPTURE_ECC_ECE);
-
- printf("Memory Error Attributes Capture:\n");
- printf(" Data Beat Number: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> ECC_CAPT_ATTR_BNUM_SHIFT);
- printf(" Transaction Size: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> ECC_CAPT_ATTR_TSIZ_SHIFT);
- printf(" Transaction Source: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> ECC_CAPT_ATTR_TSRC_SHIFT);
- printf(" Transaction Type: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> ECC_CAPT_ATTR_TTYP_SHIFT);
- printf(" Error Information Valid: %d\n\n",
- ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile ddr8349_t *ddr = &immap->ddr;
- volatile u32 val;
- u64 *addr, count, val64;
- register u64 *i;
-
- if (argc > 4) {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-
- if (argc == 2) {
- if (strcmp(argv[1], "status") == 0) {
- ecc_print_status();
- return 0;
- } else if (strcmp(argv[1], "captureclear") == 0) {
- ddr->capture_address = 0;
- ddr->capture_data_hi = 0;
- ddr->capture_data_lo = 0;
- ddr->capture_ecc = 0;
- ddr->capture_attributes = 0;
- return 0;
- }
- }
+ u32 *p;
+ int len;
- if (argc == 3) {
- if (strcmp(argv[1], "sbecnt") == 0) {
- val = simple_strtoul(argv[2], NULL, 10);
- if (val > 255) {
- printf("Incorrect Counter value, should be 0..255\n");
- return 1;
- }
-
- val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
- val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
- ddr->err_sbe = val;
- return 0;
- } else if (strcmp(argv[1], "sbethr") == 0) {
- val = simple_strtoul(argv[2], NULL, 10);
- if (val > 255) {
- printf("Incorrect Counter value, should be 0..255\n");
- return 1;
- }
-
- val = (val << ECC_ERROR_MAN_SBET_SHIFT);
- val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
- ddr->err_sbe = val;
- return 0;
- } else if (strcmp(argv[1], "errdisable") == 0) {
- val = ddr->err_disable;
-
- if (strcmp(argv[2], "+sbe") == 0) {
- val |= ECC_ERROR_DISABLE_SBED;
- } else if (strcmp(argv[2], "+mbe") == 0) {
- val |= ECC_ERROR_DISABLE_MBED;
- } else if (strcmp(argv[2], "+mse") == 0) {
- val |= ECC_ERROR_DISABLE_MSED;
- } else if (strcmp(argv[2], "+all") == 0) {
- val |= (ECC_ERROR_DISABLE_SBED |
- ECC_ERROR_DISABLE_MBED |
- ECC_ERROR_DISABLE_MSED);
- } else if (strcmp(argv[2], "-sbe") == 0) {
- val &= ~ECC_ERROR_DISABLE_SBED;
- } else if (strcmp(argv[2], "-mbe") == 0) {
- val &= ~ECC_ERROR_DISABLE_MBED;
- } else if (strcmp(argv[2], "-mse") == 0) {
- val &= ~ECC_ERROR_DISABLE_MSED;
- } else if (strcmp(argv[2], "-all") == 0) {
- val &= ~(ECC_ERROR_DISABLE_SBED |
- ECC_ERROR_DISABLE_MBED |
- ECC_ERROR_DISABLE_MSED);
- } else {
- printf("Incorrect err_disable field\n");
- return 1;
- }
-
- ddr->err_disable = val;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
- return 0;
- } else if (strcmp(argv[1], "errdetectclr") == 0) {
- val = ddr->err_detect;
-
- if (strcmp(argv[2], "mme") == 0) {
- val |= ECC_ERROR_DETECT_MME;
- } else if (strcmp(argv[2], "sbe") == 0) {
- val |= ECC_ERROR_DETECT_SBE;
- } else if (strcmp(argv[2], "mbe") == 0) {
- val |= ECC_ERROR_DETECT_MBE;
- } else if (strcmp(argv[2], "mse") == 0) {
- val |= ECC_ERROR_DETECT_MSE;
- } else if (strcmp(argv[2], "all") == 0) {
- val |= (ECC_ERROR_DETECT_MME |
- ECC_ERROR_DETECT_MBE |
- ECC_ERROR_DETECT_SBE |
- ECC_ERROR_DETECT_MSE);
- } else {
- printf("Incorrect err_detect field\n");
- return 1;
- }
-
- ddr->err_detect = val;
- return 0;
- } else if (strcmp(argv[1], "injectdatahi") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
-
- ddr->data_err_inject_hi = val;
- return 0;
- } else if (strcmp(argv[1], "injectdatalo") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
-
- ddr->data_err_inject_lo = val;
- return 0;
- } else if (strcmp(argv[1], "injectecc") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
- if (val > 0xff) {
- printf("Incorrect ECC inject mask, should be 0x00..0xff\n");
- return 1;
- }
- val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
- ddr->ecc_err_inject = val;
- return 0;
- } else if (strcmp(argv[1], "inject") == 0) {
- val = ddr->ecc_err_inject;
-
- if (strcmp(argv[2], "en") == 0)
- val |= ECC_ERR_INJECT_EIEN;
- else if (strcmp(argv[2], "dis") == 0)
- val &= ~ECC_ERR_INJECT_EIEN;
- else
- printf("Incorrect command\n");
-
- ddr->ecc_err_inject = val;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
- return 0;
- } else if (strcmp(argv[1], "mirror") == 0) {
- val = ddr->ecc_err_inject;
-
- if (strcmp(argv[2], "en") == 0)
- val |= ECC_ERR_INJECT_EMB;
- else if (strcmp(argv[2], "dis") == 0)
- val &= ~ECC_ERR_INJECT_EMB;
- else
- printf("Incorrect command\n");
-
- ddr->ecc_err_inject = val;
- return 0;
- }
- }
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+ ft_cpu_setup(blob, bd);
- if (argc == 4) {
- if (strcmp(argv[1], "test") == 0) {
- addr = (u64 *)simple_strtoul(argv[2], NULL, 16);
- count = simple_strtoul(argv[3], NULL, 16);
-
- if ((u32)addr % 8) {
- printf("Address not alligned on double word boundary\n");
- return 1;
- }
-
- disable_interrupts();
- icache_disable();
-
- for (i = addr; i < addr + count; i++) {
- /* enable injects */
- ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-
- /* write memory location injecting errors */
- *i = 0x1122334455667788ULL;
- __asm__ __volatile__ ("sync");
-
- /* disable injects */
- ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-
- /* read data, this generates ECC error */
- val64 = *i;
- __asm__ __volatile__ ("sync");
-
- /* disable errors for ECC */
- ddr->err_disable |= ~ECC_ERROR_ENABLE;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-
- /* re-initialize memory, write the location again
- * NOT injecting errors this time */
- *i = 0xcafecafecafecafeULL;
- __asm__ __volatile__ ("sync");
-
- /* enable errors for ECC */
- ddr->err_disable &= ECC_ERROR_ENABLE;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
- }
-
- icache_enable();
- enable_interrupts();
-
- return 0;
- }
+ p = ft_get_prop(blob, "/memory/reg", &len);
+ if (p != NULL) {
+ *p++ = cpu_to_be32(bd->bi_memstart);
+ *p = cpu_to_be32(bd->bi_memsize);
}
-
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
}
-
-U_BOOT_CMD(
- ecc, 4, 0, do_ecc,
- "ecc - support for DDR ECC features\n",
- "status - print out status info\n"
- "ecc captureclear - clear capture regs data\n"
- "ecc sbecnt <val> - set Single-Bit Error counter\n"
- "ecc sbethr <val> - set Single-Bit Threshold\n"
- "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n"
- " [-|+]sbe - Single-Bit Error\n"
- " [-|+]mbe - Multiple-Bit Error\n"
- " [-|+]mse - Memory Select Error\n"
- " [-|+]all - all errors\n"
- "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
- " mme - Multiple Memory Errors\n"
- " sbe - Single-Bit Error\n"
- " mbe - Multiple-Bit Error\n"
- " mse - Memory Select Error\n"
- " all - all errors\n"
- "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n"
- "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n"
- "ecc injectecc <ecc> - set ECC Error Injection Mask\n"
- "ecc inject <en|dis> - enable/disable error injection\n"
- "ecc mirror <en|dis> - enable/disable mirror byte\n"
- "ecc test <addr> <cnt> - test mem region:\n"
- " - enables injects\n"
- " - writes pattern injecting errors\n"
- " - disables injects\n"
- " - reads pattern back, generates error\n"
- " - re-inits memory"
-);
-#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
+#endif
projects / platform / kernel / u-boot.git / blobdiff