Setup extra MIMC200 chip selects

[kernel/u-boot.git] / board / mimc / mimc200 / mimc200.c

diff --git a/board/mimc/mimc200/mimc200.c b/board/mimc/mimc200/mimc200.c
index 62c0943..6df741e 100644 (file)
--- a/board/mimc/mimc200/mimc200.c
+++ b/board/mimc/mimc200/mimc200.c
@@ -30,6 +30,8 @@
 #include <asm/arch/portmux.h>
 #include <lcd.h>
 
+#include "../../../cpu/at32ap/hsmc3.h"
+
 DECLARE_GLOBAL_DATA_PTR;
 
 static const struct sdram_config sdram_config = {
@@ -86,6 +88,18 @@ int board_early_init_f(void)
        /* release phys reset */
        gpio_set_value(GPIO_PIN_PC(18), 0);     /* PHY RESET (Release)  */
 
+       /* setup Data Flash chip select (NCS2) */
+       hsmc3_writel(MODE2, 0x20121003);
+       hsmc3_writel(CYCLE2, 0x000a0009);
+       hsmc3_writel(PULSE2, 0x0a060806);
+       hsmc3_writel(SETUP2, 0x00030102);
+
+       /* setup FRAM chip select (NCS3) */
+       hsmc3_writel(MODE3, 0x10120001);
+       hsmc3_writel(CYCLE3, 0x001e001d);
+       hsmc3_writel(PULSE3, 0x08040704);
+       hsmc3_writel(SETUP3, 0x02050204);
+
 #if defined(CONFIG_MACB)
        /* init macb0 pins */
        portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);