+// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2011
* Logic Product Development <www.logicpd.com>
* Derived from Beagle Board and 3430 SDP code by
* Richard Woodruff <r-woodruff2@ti.com>
* Syed Mohammed Khasim <khasim@ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
+#include <init.h>
+#include <net.h>
#include <ns16550.h>
-#include <netdev.h>
-#include <flash.h>
#include <nand.h>
#include <i2c.h>
+#include <serial.h>
#include <twl4030.h>
+#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
+#include <asm/omap_mmc.h>
#include <asm/mach-types.h>
#include <linux/mtd/rawnand.h>
#include <asm/omap_musb.h>
DECLARE_GLOBAL_DATA_PTR;
-/*
- * two dimensional array of strucures containining board name and Linux
- * machine IDs; row it selected based on CPU column is slected based
- * on hsusb0_data5 pin having a pulldown resistor
- */
-static struct board_id {
- char *name;
- int machine_id;
- char *fdtfile;
-} boards[2][2] = {
- {
- {
- .name = "OMAP35xx SOM LV",
- .machine_id = MACH_TYPE_OMAP3530_LV_SOM,
- .fdtfile = "logicpd-som-lv-35xx-devkit.dtb",
- },
- {
- .name = "OMAP35xx Torpedo",
- .machine_id = MACH_TYPE_OMAP3_TORPEDO,
- .fdtfile = "logicpd-torpedo-35xx-devkit.dtb",
- },
- },
- {
- {
- .name = "DM37xx SOM LV",
- .fdtfile = "logicpd-som-lv-37xx-devkit.dtb",
- },
- {
- .name = "DM37xx Torpedo",
- .fdtfile = "logicpd-torpedo-37xx-devkit.dtb",
- },
- },
-};
+#define LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG1 0x00011203
+#define LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG2 0x000A1302
+#define LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG3 0x000F1302
+#define LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG4 0x0A021303
+#define LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG5 0x00120F18
+#define LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG6 0x0A030000
+#define LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG7 0x00000C50
+
+#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG1 0x00011203
+#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG2 0x00091102
+#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG3 0x000D1102
+#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG4 0x09021103
+#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG5 0x00100D15
+#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG6 0x09030000
+#define LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG7 0x00000C50
+
+#define CONFIG_SMC911X_BASE 0x08000000
#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
void get_board_mem_timings(struct board_sdrc_timings *timings)
{
timings->mr = MICRON_V_MR_165;
- /* 256MB DDR */
- timings->mcfg = MICRON_V_MCFG_200(256 << 20);
- timings->ctrla = MICRON_V_ACTIMA_200;
- timings->ctrlb = MICRON_V_ACTIMB_200;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
+
+ if (get_cpu_family() == CPU_OMAP36XX) {
+ /* 200 MHz works for OMAP36/DM37 */
+ /* 256MB DDR */
+ timings->mcfg = MICRON_V_MCFG_200(256 << 20);
+ timings->ctrla = MICRON_V_ACTIMA_200;
+ timings->ctrlb = MICRON_V_ACTIMB_200;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
+ } else {
+ /* 165 MHz works for OMAP35 */
+ timings->mcfg = MICRON_V_MCFG_165(256 << 20);
+ timings->ctrla = MICRON_V_ACTIMA_165;
+ timings->ctrlb = MICRON_V_ACTIMB_165;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ }
}
#define GPMC_NAND_COMMAND_0 (OMAP34XX_GPMC_BASE + 0x7c)
}
#endif
-#ifdef CONFIG_USB_MUSB_OMAP2PLUS
-static struct musb_hdrc_config musb_config = {
- .multipoint = 1,
- .dyn_fifo = 1,
- .num_eps = 16,
- .ram_bits = 12,
-};
-
-static struct omap_musb_board_data musb_board_data = {
- .interface_type = MUSB_INTERFACE_ULPI,
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_USB_MUSB_HOST)
- .mode = MUSB_HOST,
-#elif defined(CONFIG_USB_MUSB_GADGET)
- .mode = MUSB_PERIPHERAL,
-#else
-#error "Please define either CONFIG_USB_MUSB_HOST or CONFIG_USB_MUSB_GADGET"
-#endif
- .config = &musb_config,
- .power = 100,
- .platform_ops = &omap2430_ops,
- .board_data = &musb_board_data,
-};
-#endif
-
-#if defined(CONFIG_USB_EHCI_HCD) && !defined(CONFIG_SPL_BUILD)
-/* Call usb_stop() before starting the kernel */
-void show_boot_progress(int val)
-{
- if (val == BOOTSTAGE_ID_RUN_OS)
- usb_stop();
-}
-
-static struct omap_usbhs_board_data usbhs_bdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
-}
-
-int ehci_hcd_stop(int index)
-{
- return omap_ehci_hcd_stop();
-}
-
-#endif /* CONFIG_USB_EHCI_HCD */
-
-
/*
* Routine: misc_init_r
* Description: Configure board specific parts
int misc_init_r(void)
{
twl4030_power_init();
+ twl4030_power_mmc_init(0);
omap_die_id_display();
-
-#ifdef CONFIG_USB_MUSB_OMAP2PLUS
- musb_register(&musb_plat, &musb_board_data, (void *)MUSB_BASE);
-#endif
-
return 0;
}
-/*
- * BOARD_ID_GPIO - GPIO of pin with optional pulldown resistor on SOM LV
- */
-#define BOARD_ID_GPIO 189 /* hsusb0_data5 pin */
+#if defined(CONFIG_FLASH_CFI_DRIVER)
+static const u32 gpmc_dm37_c2nor_config[] = {
+ LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG1,
+ LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG2,
+ LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG3,
+ LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG4,
+ LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG5,
+ LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG6,
+ LOGIC_MT28_DM37_ASYNC_GPMC_CONFIG7
+};
+
+static const u32 gpmc_omap35_c2nor_config[] = {
+ LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG1,
+ LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG2,
+ LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG3,
+ LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG4,
+ LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG5,
+ LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG6,
+ LOGIC_MT28_OMAP35_ASYNC_GPMC_CONFIG7
+};
+#endif
/*
* Routine: board_init
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
+#if defined(CONFIG_FLASH_CFI_DRIVER)
+ if (get_cpu_family() == CPU_OMAP36XX) {
+ /* Enable CS2 for NOR Flash */
+ enable_gpmc_cs_config(gpmc_dm37_c2nor_config, &gpmc_cfg->cs[2],
+ 0x10000000, GPMC_SIZE_64M);
+ } else {
+ enable_gpmc_cs_config(gpmc_omap35_c2nor_config, &gpmc_cfg->cs[2],
+ 0x10000000, GPMC_SIZE_64M);
+ }
+#endif
return 0;
}
nand_unlock(mtd, 0, mtd->size, 0);
}
-int board_late_init(void)
-{
- struct board_id *board;
- unsigned int val;
-
- /*
- * To identify between a SOM LV and Torpedo module,
- * a pulldown resistor is on hsusb0_data5 for the SOM LV module.
- * Drive the pin (and let it soak), then read it back.
- * If the pin is still high its a Torpedo. If low its a SOM LV
- */
-
- /* Mux hsusb0_data5 as a GPIO */
- MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M4));
-
- if (gpio_request(BOARD_ID_GPIO, "husb0_data5.gpio_189") == 0) {
-
- /*
- * Drive BOARD_ID_GPIO - the pulldown resistor on the SOM LV
- * will drain the voltage.
- */
- gpio_direction_output(BOARD_ID_GPIO, 0);
- gpio_set_value(BOARD_ID_GPIO, 1);
-
- /* Let it soak for a bit */
- sdelay(0x100);
-
- /*
- * Read state of BOARD_ID_GPIO as an input and if its set.
- * If so the board is a Torpedo
- */
- gpio_direction_input(BOARD_ID_GPIO);
- val = gpio_get_value(BOARD_ID_GPIO);
- gpio_free(BOARD_ID_GPIO);
-
- board = &boards[!!(get_cpu_family() == CPU_OMAP36XX)][!!val];
- printf("Board: %s\n", board->name);
-
- /* Set the machine_id passed to Linux */
- if (board->machine_id)
- gd->bd->bi_arch_number = board->machine_id;
-
- /* If the user has not set fdtimage, set the default */
- if (!env_get("fdtimage"))
- env_set("fdtimage", board->fdtfile);
- }
-
- /* restore hsusb0_data5 pin as hsusb0_data5 */
- MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0));
-
-#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
- unlock_nand();
-#endif
- return 0;
-}
-#endif
-
-#if defined(CONFIG_MMC)
-int board_mmc_init(bd_t *bis)
-{
- return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#endif
-
-#if defined(CONFIG_MMC)
-void board_mmc_power_init(void)
-{
- twl4030_power_mmc_init(0);
-}
-#endif
-
#ifdef CONFIG_SMC911X
/* GPMC CS1 settings for Logic SOM LV/Torpedo LAN92xx Ethernet chip */
static const u32 gpmc_lan92xx_config[] = {
NET_LAN92XX_GPMC_CONFIG5,
NET_LAN92XX_GPMC_CONFIG6,
};
+#endif
-int board_eth_init(bd_t *bis)
+int board_late_init(void)
{
+#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
+ unlock_nand();
+#endif
+
+#ifdef CONFIG_SMC911X
enable_gpmc_cs_config(gpmc_lan92xx_config, &gpmc_cfg->cs[1],
CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
-
- return smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+ return 0;
}
#endif
-
+#if defined(CONFIG_MMC)
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
+#endif