Merge branch '2021-09-04-makefile-cleanups-part-b' into next

[platform/kernel/u-boot.git] / board / liebherr / display5 / spl.c

diff --git a/board/liebherr/display5/spl.c b/board/liebherr/display5/spl.c
index 354b63e..d5fe336 100644 (file)
--- a/board/liebherr/display5/spl.c
+++ b/board/liebherr/display5/spl.c
@@ -5,8 +5,15 @@
  */
 
 #include <common.h>
+#include <cpu_func.h>
 #include <env.h>
+#include <image.h>
+#include <init.h>
+#include <log.h>
+#include <serial.h>
 #include <spl.h>
+#include <asm/global_data.h>
+#include <linux/delay.h>
 #include <linux/libfdt.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
@@ -104,6 +111,80 @@ static const struct mx6_ddr3_cfg mt41k128m16jt_125 = {
        .trasmin = 3500,
 };
 
+iomux_v3_cfg_t const uart_console_pads[] = {
+       /* UART5 */
+       MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+       MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+       MX6_PAD_CSI0_DAT18__UART5_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
+       MX6_PAD_CSI0_DAT19__UART5_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+void displ5_set_iomux_uart_spl(void)
+{
+       SETUP_IOMUX_PADS(uart_console_pads);
+}
+
+iomux_v3_cfg_t const misc_pads_spl[] = {
+       /* Emergency recovery pin */
+       MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+void displ5_set_iomux_misc_spl(void)
+{
+       SETUP_IOMUX_PADS(misc_pads_spl);
+}
+
+#ifdef CONFIG_MXC_SPI
+iomux_v3_cfg_t const ecspi2_pads[] = {
+       /* SPI2, NOR Flash nWP, CS0 */
+       MX6_PAD_CSI0_DAT10__ECSPI2_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
+       MX6_PAD_CSI0_DAT9__ECSPI2_MOSI  | MUX_PAD_CTRL(SPI_PAD_CTRL),
+       MX6_PAD_CSI0_DAT8__ECSPI2_SCLK  | MUX_PAD_CTRL(SPI_PAD_CTRL),
+       MX6_PAD_CSI0_DAT11__GPIO5_IO29  | MUX_PAD_CTRL(NO_PAD_CTRL),
+       MX6_PAD_SD3_DAT5__GPIO7_IO00    | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+int board_spi_cs_gpio(unsigned int bus, unsigned int cs)
+{
+       if (bus != 1 || cs != 0)
+               return -EINVAL;
+
+       return IMX_GPIO_NR(5, 29);
+}
+
+void displ5_set_iomux_ecspi_spl(void)
+{
+       SETUP_IOMUX_PADS(ecspi2_pads);
+}
+
+#else
+void displ5_set_iomux_ecspi_spl(void) {}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC_IMX
+iomux_v3_cfg_t const usdhc4_pads[] = {
+       MX6_PAD_SD4_CLK__SD4_CLK        | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6_PAD_SD4_CMD__SD4_CMD        | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6_PAD_SD4_DAT0__SD4_DATA0     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6_PAD_SD4_DAT1__SD4_DATA1     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6_PAD_SD4_DAT2__SD4_DATA2     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6_PAD_SD4_DAT3__SD4_DATA3     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6_PAD_SD4_DAT4__SD4_DATA4     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6_PAD_SD4_DAT5__SD4_DATA5     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6_PAD_SD4_DAT6__SD4_DATA6     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6_PAD_SD4_DAT7__SD4_DATA7     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6_PAD_NANDF_ALE__SD4_RESET    | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+void displ5_set_iomux_usdhc_spl(void)
+{
+       SETUP_IOMUX_PADS(usdhc4_pads);
+}
+
+#else
+void displ5_set_iomux_usdhc_spl(void) {}
+#endif
+
 static void ccgr_init(void)
 {
        struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
@@ -192,7 +273,7 @@ static void spl_dram_init(void)
 #endif
 }
 
-#ifdef CONFIG_SPL_SPI_SUPPORT
+#ifdef CONFIG_SPL_SPI
 static void displ5_init_ecspi(void)
 {
        displ5_set_iomux_ecspi_spl();
@@ -202,13 +283,13 @@ static void displ5_init_ecspi(void)
 static inline void displ5_init_ecspi(void) { }
 #endif
 
-#ifdef CONFIG_SPL_MMC_SUPPORT
+#ifdef CONFIG_SPL_MMC
 static struct fsl_esdhc_cfg usdhc_cfg = {
        .esdhc_base = USDHC4_BASE_ADDR,
        .max_bus_width = 8,
 };
 
-int board_mmc_init(bd_t *bd)
+int board_mmc_init(struct bd_info *bd)
 {
        displ5_set_iomux_usdhc_spl();
 
@@ -295,7 +376,7 @@ void board_boot_order(u32 *spl_boot_list)
 #endif
 }
 
-void reset_cpu(ulong addr) {}
+void reset_cpu(void) {}
 
 #ifdef CONFIG_SPL_LOAD_FIT
 int board_fit_config_name_match(const char *name)