* (C) Copyright 2010
* ISEE 2007 SL, <www.iseebcn.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <status_led.h>
+#include <dm.h>
+#include <ns16550.h>
#include <twl4030.h>
#include <netdev.h>
+#include <spl.h>
#include <asm/gpio.h>
-#include <asm/arch/omap_gpmc.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/onenand.h>
+#include <jffs2/load_kernel.h>
+#include <mtd_node.h>
+#include <fdt_support.h>
#include "igep00x0.h"
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_CMD_NET)
-/* GPMC definitions for LAN9221 chips */
-static const u32 gpmc_lan_config[] = {
- NET_LAN9221_GPMC_CONFIG1,
- NET_LAN9221_GPMC_CONFIG2,
- NET_LAN9221_GPMC_CONFIG3,
- NET_LAN9221_GPMC_CONFIG4,
- NET_LAN9221_GPMC_CONFIG5,
- NET_LAN9221_GPMC_CONFIG6,
+static const struct ns16550_platdata igep_serial = {
+ .base = OMAP34XX_UART3,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK,
+ .fcr = UART_FCR_DEFVAL,
+};
+
+U_BOOT_DEVICE(igep_uart) = {
+ "ns16550_serial",
+ &igep_serial
};
-#endif
/*
* Routine: board_init
*/
int board_init(void)
{
- gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
- /* boot param addr */
- gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+ int loops = 100;
- return 0;
-}
+ /* find out flash memory type, assume NAND first */
+ gpmc_cs0_flash = MTD_DEV_TYPE_NAND;
+ gpmc_init();
-#if defined(CONFIG_SHOW_BOOT_PROGRESS) && !defined(CONFIG_SPL_BUILD)
-void show_boot_progress(int val)
-{
- if (val < 0) {
- /* something went wrong */
- return;
+ /* Issue a RESET and then READID */
+ writeb(NAND_CMD_RESET, &gpmc_cfg->cs[0].nand_cmd);
+ writeb(NAND_CMD_STATUS, &gpmc_cfg->cs[0].nand_cmd);
+ while ((readl(&gpmc_cfg->cs[0].nand_dat) & NAND_STATUS_READY)
+ != NAND_STATUS_READY) {
+ udelay(1);
+ if (--loops == 0) {
+ gpmc_cs0_flash = MTD_DEV_TYPE_ONENAND;
+ gpmc_init(); /* reinitialize for OneNAND */
+ break;
+ }
}
- if (!gpio_request(IGEP00X0_GPIO_LED, ""))
- gpio_direction_output(IGEP00X0_GPIO_LED, 1);
-}
+ /* boot param addr */
+ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
+ status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON);
#endif
-#ifdef CONFIG_SPL_BUILD
-/*
- * Routine: omap_rev_string
- * Description: For SPL builds output board rev
- */
-void omap_rev_string(void)
-{
+ return 0;
}
+#ifdef CONFIG_SPL_BUILD
/*
* Routine: get_board_mem_timings
* Description: If we use SPL then there is no x-loader nor config header
*/
void get_board_mem_timings(struct board_sdrc_timings *timings)
{
- timings->mr = MICRON_V_MR_165;
-#ifdef CONFIG_BOOT_NAND
- timings->mcfg = MICRON_V_MCFG_200(256 << 20);
- timings->ctrla = MICRON_V_ACTIMA_200;
- timings->ctrlb = MICRON_V_ACTIMB_200;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
-#else
- if (get_cpu_family() == CPU_OMAP34XX) {
- timings->mcfg = NUMONYX_V_MCFG_165(256 << 20);
- timings->ctrla = NUMONYX_V_ACTIMA_165;
- timings->ctrlb = NUMONYX_V_ACTIMB_165;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ int mfr, id, err = identify_nand_chip(&mfr, &id);
- } else {
- timings->mcfg = NUMONYX_V_MCFG_200(256 << 20);
- timings->ctrla = NUMONYX_V_ACTIMA_200;
- timings->ctrlb = NUMONYX_V_ACTIMB_200;
+ timings->mr = MICRON_V_MR_165;
+ if (!err) {
+ switch (mfr) {
+ case NAND_MFR_HYNIX:
+ timings->mcfg = HYNIX_V_MCFG_200(256 << 20);
+ timings->ctrla = HYNIX_V_ACTIMA_200;
+ timings->ctrlb = HYNIX_V_ACTIMB_200;
+ break;
+ case NAND_MFR_MICRON:
+ timings->mcfg = MICRON_V_MCFG_200(256 << 20);
+ timings->ctrla = MICRON_V_ACTIMA_200;
+ timings->ctrlb = MICRON_V_ACTIMB_200;
+ break;
+ default:
+ /* Should not happen... */
+ break;
+ }
timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
+ gpmc_cs0_flash = MTD_DEV_TYPE_NAND;
+ } else {
+ if (get_cpu_family() == CPU_OMAP34XX) {
+ timings->mcfg = NUMONYX_V_MCFG_165(256 << 20);
+ timings->ctrla = NUMONYX_V_ACTIMA_165;
+ timings->ctrlb = NUMONYX_V_ACTIMB_165;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ } else {
+ timings->mcfg = NUMONYX_V_MCFG_200(256 << 20);
+ timings->ctrla = NUMONYX_V_ACTIMA_200;
+ timings->ctrlb = NUMONYX_V_ACTIMB_200;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
+ }
+ gpmc_cs0_flash = MTD_DEV_TYPE_ONENAND;
}
-#endif
+}
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+ /* break into full u-boot on 'c' */
+ if (serial_tstc() && serial_getc() == 'c')
+ return 1;
+
+ return 0;
}
#endif
+#endif
+
+int onenand_board_init(struct mtd_info *mtd)
+{
+ if (gpmc_cs0_flash == MTD_DEV_TYPE_ONENAND) {
+ struct onenand_chip *this = mtd->priv;
+ this->base = (void *)CONFIG_SYS_ONENAND_BASE;
+ return 0;
+ }
+ return 1;
+}
#if defined(CONFIG_CMD_NET)
+static void reset_net_chip(int gpio)
+{
+ if (!gpio_request(gpio, "eth nrst")) {
+ gpio_direction_output(gpio, 1);
+ udelay(1);
+ gpio_set_value(gpio, 0);
+ udelay(40);
+ gpio_set_value(gpio, 1);
+ mdelay(10);
+ }
+}
+
/*
* Routine: setup_net_chip
* Description: Setting up the configuration GPMC registers specific to the
static void setup_net_chip(void)
{
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+ static const u32 gpmc_lan_config[] = {
+ NET_LAN9221_GPMC_CONFIG1,
+ NET_LAN9221_GPMC_CONFIG2,
+ NET_LAN9221_GPMC_CONFIG3,
+ NET_LAN9221_GPMC_CONFIG4,
+ NET_LAN9221_GPMC_CONFIG5,
+ NET_LAN9221_GPMC_CONFIG6,
+ };
- enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,
- GPMC_SIZE_16M);
+ enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5],
+ CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
&ctrl_base->gpmc_nadv_ale);
- /* Make GPIO 64 as output pin and send a magic pulse through it */
- if (!gpio_request(64, "")) {
- gpio_direction_output(64, 0);
- gpio_set_value(64, 1);
- udelay(1);
- gpio_set_value(64, 0);
- udelay(1);
- gpio_set_value(64, 1);
- }
+ reset_net_chip(64);
+}
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_SMC911X
+ return smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#else
+ return 0;
+#endif
}
#else
static inline void setup_net_chip(void) {}
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
+ return omap_mmc_init(0, 0, 0, -1, -1);
+}
+#endif
+
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
+#endif
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_FDT_FIXUP_PARTITIONS
+ static struct node_info nodes[] = {
+ { "ti,omap2-nand", MTD_DEV_TYPE_NAND, },
+ { "ti,omap2-onenand", MTD_DEV_TYPE_ONENAND, },
+ };
+
+ fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+#endif
return 0;
}
#endif
+void set_fdt(void)
+{
+ switch (gd->bd->bi_arch_number) {
+ case MACH_TYPE_IGEP0020:
+ setenv("fdtfile", "omap3-igep0020.dtb");
+ break;
+ case MACH_TYPE_IGEP0030:
+ setenv("fdtfile", "omap3-igep0030.dtb");
+ break;
+ }
+}
+
/*
* Routine: misc_init_r
* Description: Configure board specific parts
setup_net_chip();
- dieid_num_r();
+ omap_die_id_display();
+
+ set_fdt();
return 0;
}
+void board_mtdparts_default(const char **mtdids, const char **mtdparts)
+{
+ struct mtd_info *mtd = get_mtd_device(NULL, 0);
+ if (mtd) {
+ static char ids[24];
+ static char parts[48];
+ const char *linux_name = "omap2-nand";
+ if (strncmp(mtd->name, "onenand0", 8) == 0)
+ linux_name = "omap2-onenand";
+ snprintf(ids, sizeof(ids), "%s=%s", mtd->name, linux_name);
+ snprintf(parts, sizeof(parts), "mtdparts=%s:%dk(SPL),-(UBI)",
+ linux_name, 4 * mtd->erasesize >> 10);
+ *mtdids = ids;
+ *mtdparts = parts;
+ }
+}
+
/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
MUX_IGEP0030();
#endif
}
-
-#if defined(CONFIG_CMD_NET)
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC911X
- rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
- return rc;
-}
-#endif