#define MAIN_SECT_SIZE 0x00020000 /* 128k per sector */
#endif
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/**
* flash_init: - initialize data structures for flash chips
int i, j;
ulong size = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
ulong flashbase = 0;
flash_info[i].flash_id =
(INTEL_MANUFACT & FLASH_VENDMASK) |
(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
- memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+ memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
switch (i) {
case 0:
/* Protect u-boot sectors */
flash_protect(FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + (256*1024) - 1,
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + (256*1024) - 1,
&flash_info[0]);
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ CONFIG_ENV_ADDR,
+ CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
&flash_info[0]);
#endif
{
int i, j;
- for (j=0; j<CFG_MAX_FLASH_BANKS; j++) {
+ for (j=0; j<CONFIG_SYS_MAX_FLASH_BANKS; j++) {
switch (info->flash_id & FLASH_VENDMASK) {
{
int flag, prot, sect;
int rc = ERR_OK;
+ ulong start;
if (info->flash_id == FLASH_UNKNOWN)
return ERR_UNKNOWN_FLASH_TYPE;
PRINTK("\n");
/* arm simple, non interrupt dependent timer */
- reset_timer_masked();
+ start = get_timer(0);
if (info->protect[sect] == 0) { /* not protected */
u16 * volatile addr = (u16 * volatile)(info->start[sect]);
while ((*addr & 0x0080) != 0x0080) {
PRINTK(".");
- if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
*addr = 0x00B0; /* suspend erase*/
*addr = 0x00FF; /* read mode */
rc = ERR_TIMOUT;
volatile u16 *addr = (u16 *)dest, val;
int rc = ERR_OK;
int flag;
+ ulong start;
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) return ERR_NOT_ERASED;
*addr = data;
/* arm simple, non interrupt dependent timer */
- reset_timer_masked();
+ start = get_timer(0);
/* wait while polling the status register */
while(((val = *addr) & 0x80) != 0x80) {
- if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
rc = ERR_TIMOUT;
*addr = 0xB0; /* suspend program command */
goto outahere;