odroid: remove CONFIG_DM_I2C_COMPAT config

[platform/kernel/u-boot.git] / board / ifm / ac14xx / ac14xx.c

diff --git a/board/ifm/ac14xx/ac14xx.c b/board/ifm/ac14xx/ac14xx.c
index c8e88cc..cd79e80 100644 (file)
--- a/board/ifm/ac14xx/ac14xx.c
+++ b/board/ifm/ac14xx/ac14xx.c
@@ -3,13 +3,7 @@
  * (C) Copyright 2009 Dave Srl www.dave.eu
  * (C) Copyright 2010 ifm ecomatic GmbH
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -23,7 +17,6 @@
 #include <i2c.h>
 #endif
 
-static int eeprom_diag;
 static int mac_diag;
 static int gpio_diag;
 
@@ -142,7 +135,6 @@ struct __attribute__ ((__packed__)) eeprom_layout {
 #define HW_COMP_MAINCPU 2
 
 static struct eeprom_layout eeprom_content;
-static int eeprom_was_read;    /* has_been_read */
 static int eeprom_is_valid;
 static int eeprom_version;
 
@@ -159,53 +151,7 @@ static int eeprom_version;
 
 static int read_eeprom(void)
 {
-       int eeprom_datalen;
-       int ret;
-
-       if (eeprom_was_read)
-               return 0;
-
-       eeprom_is_valid = 0;
-       ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
-                       CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
-                       (uchar *)&eeprom_content, sizeof(eeprom_content));
-       if (eeprom_diag) {
-               printf("DIAG: %s() read rc[%d], size[%d]\n",
-                       __func__, ret, sizeof(eeprom_content));
-       }
-
-       if (ret != 0)
-               return -1;
-
-       eeprom_was_read = 1;
-
-       /*
-        * check validity of EEPROM content
-        * (check version, length, optionally checksum)
-        */
-       eeprom_is_valid = 1;
-       eeprom_datalen = get_eeprom_field_int(eeprom_content.len);
-       eeprom_version = get_eeprom_field_int(eeprom_content.version);
-
-       if (eeprom_diag) {
-               printf("DIAG: %s() magic[%c%c%c] len[%d] ver[%d] type[%d]\n",
-                       __func__, eeprom_content.magic[0],
-                       eeprom_content.magic[1], eeprom_content.magic[2],
-                       eeprom_datalen, eeprom_version, eeprom_content.type);
-       }
-       if (strncmp(eeprom_content.magic, "ifm", strlen("ifm")) != 0)
-               eeprom_is_valid = 0;
-       if (eeprom_datalen < sizeof(struct eeprom_layout) - 5)
-               eeprom_is_valid = 0;
-       if ((eeprom_version != 1) && (eeprom_version != 2))
-               eeprom_is_valid = 0;
-       if (eeprom_content.type != HW_COMP_MAINCPU)
-               eeprom_is_valid = 0;
-
-       if (eeprom_diag)
-               printf("DIAG: %s() valid[%d]\n", __func__, eeprom_is_valid);
-
-       return ret;
+       return -ENOSYS;
 }
 
 int mac_read_from_eeprom(void)
@@ -231,7 +177,7 @@ int mac_read_from_eeprom(void)
                break;
        }
 
-       if (mac && is_valid_ether_addr(mac)) {
+       if (mac && is_valid_ethaddr(mac)) {
                eth_setenv_enetaddr("ethaddr", mac);
                if (mac_diag) {
                        mac_txt = getenv("ethaddr");
@@ -316,9 +262,12 @@ u32 sdram_init_seq[] = {
        /* EMPTY, optional, we don't do it */
 };
 
-phys_size_t initdram(int board_type)
+int dram_init(void)
 {
-       return fixed_sdram(NULL, sdram_init_seq, ARRAY_SIZE(sdram_init_seq));
+       gd->ram_size = fixed_sdram(NULL, sdram_init_seq,
+                                  ARRAY_SIZE(sdram_init_seq));
+
+       return 0;
 }
 
 int misc_init_r(void)
@@ -327,17 +276,14 @@ int misc_init_r(void)
        char *s;
        int want_recovery;
 
-       /* we use bus I2C-0 for the on-board eeprom */
-       i2c_set_bus_num(0);
-
        /* setup GPIO directions and initial values */
        gpio_configure();
 
        /*
         * enforce the start of the recovery system when
         * - the appropriate keys were pressed
-        * - a previous installation was aborted or has failed
         * - "some" external software told us to
+        * - a previous installation was aborted or has failed
         */
        want_recovery = 0;
        keys = gpio_querykbd();
@@ -347,6 +293,11 @@ int misc_init_r(void)
                printf("detected recovery request (keyboard)\n");
                want_recovery = 1;
        }
+       s = getenv("want_recovery");
+       if ((s != NULL) && (*s != '\0')) {
+               printf("detected recovery request (environment)\n");
+               want_recovery = 1;
+       }
        s = getenv("install_in_progress");
        if ((s != NULL) && (*s != '\0')) {
                printf("previous installation has not completed\n");
@@ -357,11 +308,6 @@ int misc_init_r(void)
                printf("previous installation has failed\n");
                want_recovery = 1;
        }
-       s = getenv("want_recovery");
-       if ((s != NULL) && (*s != '\0')) {
-               printf("detected recovery request (environment)\n");
-               want_recovery = 1;
-       }
        if (want_recovery) {
                printf("enforced start of the recovery system\n");
                setenv("bootcmd", "run recovery");
@@ -613,9 +559,11 @@ int checkboard(void)
        return 0;
 }
 
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
 {
        ft_cpu_setup(blob, bd);
+
+       return 0;
 }
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+#endif /* CONFIG_OF_BOARD_SETUP */