ppc4xx: TLB init file cleanup

[platform/kernel/u-boot.git] / board / gdsys / intip / init.S

diff --git a/board/gdsys/intip/init.S b/board/gdsys/intip/init.S
index a8e8b6c..5a819c2 100644 (file)
--- a/board/gdsys/intip/init.S
+++ b/board/gdsys/intip/init.S
@@ -51,7 +51,7 @@ tlbtab:
         * enable SA_I
         */
        tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR,
-               4, AC_R|AC_W|AC_X|SA_G) /* TLB 0 */
+               4, AC_RWX | SA_G) /* TLB 0 */
 
        /*
         * TLB entries for SDRAM are not needed on this platform.
@@ -62,36 +62,36 @@ tlbtab:
 #ifdef CONFIG_SYS_INIT_RAM_DCACHE
        /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
        tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR,
-               0, AC_R|AC_W|AC_X|SA_G)
+               0, AC_RWX | SA_G)
 #endif
 
        tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC,
-               AC_R|AC_W|SA_G|SA_I)
+               AC_RW | SA_IG)
        tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x20000000, 0xC,
-               AC_R|AC_W|SA_G|SA_I)
+               AC_RW | SA_IG)
 
        /* TLB-entry for NVRAM */
        tlbentry(CONFIG_SYS_NVRAM_BASE, SZ_1M, CONFIG_SYS_NVRAM_BASE, 4,
-               AC_R|AC_W|SA_G|SA_I)
+               AC_RW | SA_IG)
 
        /* TLB-entry for UART */
        tlbentry(CONFIG_SYS_UART_BASE, SZ_16K, CONFIG_SYS_UART_BASE, 4,
-               AC_R|AC_W|SA_G|SA_I)
+               AC_RW | SA_IG)
 
        /* TLB-entry for IO */
        tlbentry(CONFIG_SYS_IO_BASE, SZ_16K, CONFIG_SYS_IO_BASE, 4,
-               AC_R|AC_W|SA_G|SA_I)
+               AC_RW | SA_IG)
 
        /* TLB-entry for OCM */
        tlbentry(CONFIG_SYS_OCM_BASE, SZ_1M, 0x00000000, 4,
-               AC_R|AC_W|AC_X|SA_I)
+               AC_RWX | SA_I)
 
        /* TLB-entry for Local Configuration registers => peripherals */
        tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M, CONFIG_SYS_LOCAL_CONF_REGS,
-               4, AC_R|AC_W|AC_X|SA_G|SA_I)
+               4, AC_RWX | SA_IG)
 
        /* AHB: Internal USB Peripherals (USB, SATA) */
        tlbentry(CONFIG_SYS_AHB_BASE, SZ_1M, 0xbff00000, 4,
-               AC_R|AC_W|AC_X|SA_G|SA_I)
+               AC_RWX | SA_IG)
 
        tlbtab_end