Merge branch 'master' of git://git.denx.de/u-boot-samsung

[platform/kernel/u-boot.git] / board / gateworks / gw_ventana / gw_ventana.c

diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 0768799..6b950ee 100644 (file)
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -19,6 +19,7 @@
 #include <asm/imx-common/spi.h>
 #include <asm/imx-common/video.h>
 #include <asm/io.h>
+#include <asm/setup.h>
 #include <dm.h>
 #include <dm/platform_data/serial_mxc.h>
 #include <hwconfig.h>
@@ -76,7 +77,7 @@ static iomux_v3_cfg_t const enet_pads[] = {
        IOMUX_PADS(PAD_ENET_TXD0__GPIO1_IO30 | DIO_PAD_CFG),
 };
 
-/* NAND */
+#ifdef CONFIG_CMD_NAND
 static iomux_v3_cfg_t const nfc_pads[] = {
        IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE     | MUX_PAD_CTRL(NO_PAD_CTRL)),
        IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE     | MUX_PAD_CTRL(NO_PAD_CTRL)),
@@ -95,7 +96,6 @@ static iomux_v3_cfg_t const nfc_pads[] = {
        IOMUX_PADS(PAD_NANDF_D7__NAND_DATA07   | MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
-#ifdef CONFIG_CMD_NAND
 static void setup_gpmi_nand(void)
 {
        struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
@@ -227,6 +227,18 @@ int board_phy_config(struct phy_device *phydev)
                phy_write(phydev, MDIO_DEVAD_NONE, 22, 0);
        }
 
+       /* TI DP83867 */
+       else if (phydev->phy_id == 0x2000a231) {
+               /* configure register 0x170 for ref CLKOUT */
+               phy_write(phydev, MDIO_DEVAD_NONE, 13, 0x001f);
+               phy_write(phydev, MDIO_DEVAD_NONE, 14, 0x0170);
+               phy_write(phydev, MDIO_DEVAD_NONE, 13, 0x401f);
+               val = phy_read(phydev, MDIO_DEVAD_NONE, 14);
+               val &= ~0x1f00;
+               val |= 0x0b00; /* chD tx clock*/
+               phy_write(phydev, MDIO_DEVAD_NONE, 14, val);
+       }
+
        if (phydev->drv->config)
                phydev->drv->config(phydev);
 
@@ -694,6 +706,8 @@ int checkboard(void)
 static const struct boot_mode board_boot_modes[] = {
        /* NAND: 64pages per block, 3 row addr cycles, 2 copies of FCB/DBBT */
        { "nand", MAKE_CFGVAL(0x80, 0x02, 0x00, 0x00) },
+       { "emmc2", MAKE_CFGVAL(0x60, 0x48, 0x00, 0x00) }, /* GW5600 */
+       { "emmc3", MAKE_CFGVAL(0x60, 0x50, 0x00, 0x00) }, /* GW5903/GW5904 */
        { NULL, 0 },
 };
 #endif
@@ -745,7 +759,8 @@ int misc_init_r(void)
                        setenv("fdt_file1", fdt);
                        if (board_type != GW551x &&
                            board_type != GW552x &&
-                           board_type != GW553x)
+                           board_type != GW553x &&
+                           board_type != GW560x)
                                str[4] = 'x';
                        str[5] = 'x';
                        str[6] = 0;
@@ -1076,6 +1091,12 @@ void ft_board_pci_fixup(void *blob, bd_t *bd)
 }
 #endif /* if defined(CONFIG_CMD_PCI) */
 
+void ft_board_wdog_fixup(void *blob, const char *path)
+{
+       ft_delprop_path(blob, path, "ext-reset-output");
+       ft_delprop_path(blob, path, "fsl,ext-reset-output");
+}
+
 /*
  * called prior to booting kernel or by 'fdt boardsetup' command
  *
@@ -1158,8 +1179,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 
                /* GW51xx-E adds WDOG1_B external reset */
                if (rev < 'E')
-                       ft_delprop_path(blob, WDOG1_PATH,
-                                       "fsl,ext-reset-output");
+                       ft_board_wdog_fixup(blob, WDOG1_PATH);
                break;
 
        case GW52xx:
@@ -1189,23 +1209,19 @@ int ft_board_setup(void *blob, bd_t *bd)
                            strstr((const char *)info->model, "SP331-B"))
                                gpio_cfg[board_type].usd_vsel = 0;
 
-                       /* GW520x-E adds WDOG1_B external reset */
-                       if (info->model[4] == '0' && rev < 'E')
-                               ft_delprop_path(blob, WDOG1_PATH,
-                                               "fsl,ext-reset-output");
-
                        /* GW522x-B adds WDOG1_B external reset */
-                       if (info->model[4] == '2' && rev < 'B')
-                               ft_delprop_path(blob, WDOG1_PATH,
-                                               "fsl,ext-reset-output");
+                       ft_board_wdog_fixup(blob, WDOG1_PATH);
                }
+
+               /* GW520x-E adds WDOG1_B external reset */
+               else if (info->model[4] == '0' && rev < 'E')
+                       ft_board_wdog_fixup(blob, WDOG1_PATH);
                break;
 
        case GW53xx:
                /* GW53xx-E adds WDOG1_B external reset */
                if (rev < 'E')
-                       ft_delprop_path(blob, WDOG1_PATH,
-                                       "fsl,ext-reset-output");
+                       ft_board_wdog_fixup(blob, WDOG1_PATH);
                break;
 
        case GW54xx:
@@ -1219,8 +1235,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 
                /* GW54xx-E adds WDOG2_B external reset */
                if (rev < 'E')
-                       ft_delprop_path(blob, WDOG2_PATH,
-                                       "fsl,ext-reset-output");
+                       ft_board_wdog_fixup(blob, WDOG2_PATH);
                break;
 
        case GW551x:
@@ -1269,8 +1284,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 
                /* GW551x-C adds WDOG1_B external reset */
                if (rev < 'C')
-                       ft_delprop_path(blob, WDOG1_PATH,
-                                       "fsl,ext-reset-output");
+                       ft_board_wdog_fixup(blob, WDOG1_PATH);
                break;
        }