+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2009-2012 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
+ * Copyright 2020 NXP
*/
#include <common.h>
#include <command.h>
+#include <env.h>
+#include <fdt_support.h>
#include <i2c.h>
+#include <init.h>
+#include <irq_func.h>
#include <netdev.h>
#include <linux/compiler.h>
#include <asm/mmu.h>
return 0;
}
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
{
int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+
+ ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+ 1, &dev);
+ if (ret) {
+ printf("%s: Cannot find udev for a bus %d\n", __func__,
+ bus_num);
+ return ret;
+ }
+
+ ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
if (ret) {
puts("PCA: failed to select proper channel\n");
return ret;
{
int i, ret, voltage_read = 0;
u16 vol_mon;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+ int bus_num = 0;
+#endif
for (i = 0; i < NUM_READINGS; i++) {
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_chip_for_busnum(bus_num, I2C_VOL_MONITOR_ADDR,
+ 1, &dev);
+ if (ret) {
+ printf("%s: Cannot find udev for a bus %d\n", __func__,
+ bus_num);
+ return ret;
+ }
+
+ ret = dm_i2c_read(dev,
+ I2C_VOL_MONITOR_BUS_V_OFFSET,
+ (void *)&vol_mon, 2);
+#else
ret = i2c_read(I2C_VOL_MONITOR_ADDR,
I2C_VOL_MONITOR_BUS_V_OFFSET, 1, (void *)&vol_mon, 2);
+#endif
if (ret) {
printf("VID: failed to read core voltage\n");
return ret;
unsigned voltage;
};
- ret = select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR);
+ ret = select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR, 0);
if (ret) {
debug("VID: I2c failed to switch channel\n");
ret = -1;
u32 srds_prtcl_s1, srds_prtcl_s2;
int ret;
- ret = select_i2c_ch_pca9547(I2C_MUX_CH_VSC3316_FS);
+ ret = select_i2c_ch_pca9547(I2C_MUX_CH_VSC3316_FS, 0);
if (ret)
return ret;
/* Configure board SERDES ports crossbar */
config_frontside_crossbar_vsc3316();
config_backside_crossbar_mux();
- select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
return 0;
}
ft_cpu_setup(blob, bd);
- base = getenv_bootm_low();
- size = getenv_bootm_size();
+ base = env_get_bootm_low();
+ size = env_get_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
}
/* Voltage secion */
- if (!select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR)) {
+ if (!select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR, 0)) {
vdd = read_voltage();
if (vdd > 0)
printf("Core voltage= %d mV\n", vdd);
- select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
}
printf("XVDD = 1.%d V\n", ((brdcfg[8] & 0xf) - 4) * 5 + 25);