board/freescale: add the DM_ETH changes for the PPC DPAA platforms

[platform/kernel/u-boot.git] / board / freescale / t208xrdb / t208xrdb.c

diff --git a/board/freescale/t208xrdb/t208xrdb.c b/board/freescale/t208xrdb/t208xrdb.c
index 265c1f9..5ba1682 100644 (file)
--- a/board/freescale/t208xrdb/t208xrdb.c
+++ b/board/freescale/t208xrdb/t208xrdb.c
@@ -1,12 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2009-2013 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:     GPL-2.0+
  */
 
 #include <common.h>
 #include <command.h>
+#include <env.h>
+#include <fdt_support.h>
 #include <i2c.h>
+#include <image.h>
+#include <init.h>
 #include <netdev.h>
 #include <linux/compiler.h>
 #include <asm/mmu.h>
@@ -14,11 +17,11 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include "t208xrdb.h"
 #include "cpld.h"
+#include "../common/vid.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -58,7 +61,7 @@ int checkboard(void)
 int board_early_init_r(void)
 {
        const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-       const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+       int flash_esel = find_tlb_idx((void *)flashbase, 1);
        /*
         * Remap Boot flash + PROMJET region to caching-inhibited
         * so that flash can be erased properly.
@@ -67,19 +70,25 @@ int board_early_init_r(void)
        /* Flush d-cache and invalidate i-cache of any FLASH data */
        flush_dcache();
        invalidate_icache();
-
-       /* invalidate existing TLB entry for flash + promjet */
-       disable_tlb(flash_esel);
+       if (flash_esel == -1) {
+               /* very unlikely unless something is messed up */
+               puts("Error: Could not find TLB for FLASH BASE\n");
+               flash_esel = 2; /* give our best effort to continue */
+       } else {
+               /* invalidate existing TLB entry for flash + promjet */
+               disable_tlb(flash_esel);
+       }
 
        set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
                MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                0, flash_esel, BOOKE_PAGESZ_256M, 1);
 
-       set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
-       setup_portals();
-#endif
-
+       /*
+        * Adjust core voltage according to voltage ID
+        * This function changes I2C mux to channel 2.
+        */
+       if (adjust_vdd(0))
+               printf("Warning: Adjusting core voltage failed.\n");
        return 0;
 }
 
@@ -95,18 +104,25 @@ unsigned long get_board_ddr_clk(void)
 
 int misc_init_r(void)
 {
+       u8 reg;
+
+       /* Reset CS4315 PHY */
+       reg = CPLD_READ(reset_ctl);
+       reg |= CPLD_RSTCON_EDC_RST;
+       CPLD_WRITE(reset_ctl, reg);
+
        return 0;
 }
 
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
 {
        phys_addr_t base;
        phys_size_t size;
 
        ft_cpu_setup(blob, bd);
 
-       base = getenv_bootm_low();
-       size = getenv_bootm_size();
+       base = env_get_bootm_low();
+       size = env_get_bootm_size();
 
        fdt_fixup_memory(blob, (u64)base, (u64)size);
 
@@ -115,10 +131,14 @@ void ft_board_setup(void *blob, bd_t *bd)
 #endif
 
        fdt_fixup_liodn(blob);
-       fdt_fixup_dr_usb(blob, bd);
+       fsl_fdt_fixup_dr_usb(blob, bd);
 
 #ifdef CONFIG_SYS_DPAA_FMAN
+#ifndef CONFIG_DM_ETH
        fdt_fixup_fman_ethernet(blob);
+#endif
        fdt_fixup_board_enet(blob);
 #endif
+
+       return 0;
 }